TY - CHAP
T1 - Thermal Energy Storage Performance of Sustainable Mortars Made of Recycled Aggregates and Microencapsulated Phase Change Materials
AU - Rabiei, Fatemeh
AU - Zanjani, Mahdi
AU - Pezzoli, Chiara
AU - Lagazzo, Alberto
AU - Ferrandiz-Mas, Veronica
AU - Ferreira, Saulo Rocha
AU - Caggiano, Antonio
PY - 2026/6/28
Y1 - 2026/6/28
N2 - This paper reports on the results of an experimental program on sustainable cementitious composites made with recycled aggregates combined with microencapsulated phase change material (MPCM) to enhance thermal energy storage. The study focuses on the development and evaluation of cement-based mortars incorporating river sand (as a reference) and recycled aggregates as a sustainable alternative. In all cases studied, 0% and 20% (by total mortar volume) of MPCM were used to replace part of the aggregates. Tests conducted included preliminary tests on raw materials to update the mix design while the experimental campaign included thermal, durability and mechanical testing. The MPCM used in the study has an apparent solid density of 0.80 g/cm3 and a latent heat of 160 kJ/kg. According to the results, water absorption in recycled aggregate mortars increased considerably compared to the reference, but the inclusion of 20% MPCM reduced it partially. This mixture demonstrated significant thermal energy storage capacity, particularly due to the incorporation of MPCM, when compared to the reference. However, the use of recycled aggregates resulted in a notable reduction in both compressive and flexural strengths. Additionally, the incorporation of MPCM led to a further decrease in these mechanical properties relative to the reference mix.
AB - This paper reports on the results of an experimental program on sustainable cementitious composites made with recycled aggregates combined with microencapsulated phase change material (MPCM) to enhance thermal energy storage. The study focuses on the development and evaluation of cement-based mortars incorporating river sand (as a reference) and recycled aggregates as a sustainable alternative. In all cases studied, 0% and 20% (by total mortar volume) of MPCM were used to replace part of the aggregates. Tests conducted included preliminary tests on raw materials to update the mix design while the experimental campaign included thermal, durability and mechanical testing. The MPCM used in the study has an apparent solid density of 0.80 g/cm3 and a latent heat of 160 kJ/kg. According to the results, water absorption in recycled aggregate mortars increased considerably compared to the reference, but the inclusion of 20% MPCM reduced it partially. This mixture demonstrated significant thermal energy storage capacity, particularly due to the incorporation of MPCM, when compared to the reference. However, the use of recycled aggregates resulted in a notable reduction in both compressive and flexural strengths. Additionally, the incorporation of MPCM led to a further decrease in these mechanical properties relative to the reference mix.
KW - Cement-Based Composites
KW - Mechanical Properties
KW - Microencapsulation
KW - Phase Change Material
KW - Recycled Aggregates
KW - Sustainable Mortars
KW - Thermal Energy Storage
UR - https://www.scopus.com/pages/publications/105046754852
U2 - 10.1007/978-3-032-30128-4_6
DO - 10.1007/978-3-032-30128-4_6
M3 - Book chapter
AN - SCOPUS:105046754852
SN - 9783032301277
T3 - RILEM Bookseries
SP - 43
EP - 51
BT - Proceedings of the 79th RILEM Annual Week & ICONS 2025
PB - Springer Science and Business Media B.V.
CY - Cham, Switzerland
ER -