The turboexpansion concept - Initial dynamometer results

J. W. G. Turner, R. J. Pearson, M. D. Bassett, D. W. Blundell, D. W. Taitt

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Abstract

An expedient route to improving in-vehicle fuel economy in 4-stroke cycle engines is to reduce the swept volume of an engine and run it at a higher BMEP for any given output. The full-load performance of a larger capacity engine can be achieved through pressure charging. However, for maximum fuel economy, particularly at part-load, the expansion ratio, and consequently the compression ratio (CR) should be kept as high as possible. This is at odds with the requirement in pressure-charged gasoline engines to reduce the CR at higher loads due to the knock limit. In earlier work, the authors studied a pressure-charging system aimed at allowing a high CR to be maintained at all times. The operation of this type of system involves deliberately over-compressing the charge air, cooling it at the elevated pressure and temperature, and then expanding it down to the desired plenum pressure, ensuring a plenum temperature which can potentially become sub-atmospheric at full-load. Due to the ability to support a high fixed CR, it is possible that an engine fitted with such a charging system could achieve fuel economy equal to or better than a Variable Compression Ratio unit, while permitting conventional engine architecture and assembly lines. The concept has been termed "Turboexpansion". This paper analyses some initial test bed results taken from an engine fitted with such a charging system, and discusses future development work intended to establish further the validity of the concept and hence its feasibility as a tool to facilitate aggressive engine downsizing. Additional theoretical analysis is presented which indicates constraints on the effectiveness of the system in terms of its sensitivity to the separate component efficiencies.

Original languageEnglish
Title of host publicationSAE Technical Papers
DOIs
Publication statusPublished - 1 Dec 2005
EventSAE 2005 World Congress - Detroit, USA United States
Duration: 1 Apr 2005 → …

Conference

ConferenceSAE 2005 World Congress
CountryUSA United States
CityDetroit
Period1/04/05 → …

Fingerprint

Dynamometers
Engines
Fuel economy
Compression ratio (machinery)
Gasoline
Cooling
Temperature
Air

Cite this

Turner, J. W. G., Pearson, R. J., Bassett, M. D., Blundell, D. W., & Taitt, D. W. (2005). The turboexpansion concept - Initial dynamometer results. In SAE Technical Papers https://doi.org/10.4271/2005-01-1853

The turboexpansion concept - Initial dynamometer results. / Turner, J. W. G.; Pearson, R. J.; Bassett, M. D.; Blundell, D. W.; Taitt, D. W.

SAE Technical Papers. 2005.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turner, JWG, Pearson, RJ, Bassett, MD, Blundell, DW & Taitt, DW 2005, The turboexpansion concept - Initial dynamometer results. in SAE Technical Papers. SAE 2005 World Congress, Detroit, USA United States, 1/04/05. https://doi.org/10.4271/2005-01-1853
Turner JWG, Pearson RJ, Bassett MD, Blundell DW, Taitt DW. The turboexpansion concept - Initial dynamometer results. In SAE Technical Papers. 2005 https://doi.org/10.4271/2005-01-1853
Turner, J. W. G. ; Pearson, R. J. ; Bassett, M. D. ; Blundell, D. W. ; Taitt, D. W. / The turboexpansion concept - Initial dynamometer results. SAE Technical Papers. 2005.
@inproceedings{d3215bb9f0df43f08e27bf37866f3263,
title = "The turboexpansion concept - Initial dynamometer results",
abstract = "An expedient route to improving in-vehicle fuel economy in 4-stroke cycle engines is to reduce the swept volume of an engine and run it at a higher BMEP for any given output. The full-load performance of a larger capacity engine can be achieved through pressure charging. However, for maximum fuel economy, particularly at part-load, the expansion ratio, and consequently the compression ratio (CR) should be kept as high as possible. This is at odds with the requirement in pressure-charged gasoline engines to reduce the CR at higher loads due to the knock limit. In earlier work, the authors studied a pressure-charging system aimed at allowing a high CR to be maintained at all times. The operation of this type of system involves deliberately over-compressing the charge air, cooling it at the elevated pressure and temperature, and then expanding it down to the desired plenum pressure, ensuring a plenum temperature which can potentially become sub-atmospheric at full-load. Due to the ability to support a high fixed CR, it is possible that an engine fitted with such a charging system could achieve fuel economy equal to or better than a Variable Compression Ratio unit, while permitting conventional engine architecture and assembly lines. The concept has been termed {"}Turboexpansion{"}. This paper analyses some initial test bed results taken from an engine fitted with such a charging system, and discusses future development work intended to establish further the validity of the concept and hence its feasibility as a tool to facilitate aggressive engine downsizing. Additional theoretical analysis is presented which indicates constraints on the effectiveness of the system in terms of its sensitivity to the separate component efficiencies.",
author = "Turner, {J. W. G.} and Pearson, {R. J.} and Bassett, {M. D.} and Blundell, {D. W.} and Taitt, {D. W.}",
note = "SAE Paper no. 2005-01-1853",
year = "2005",
month = "12",
day = "1",
doi = "10.4271/2005-01-1853",
language = "English",
booktitle = "SAE Technical Papers",

}

TY - GEN

T1 - The turboexpansion concept - Initial dynamometer results

AU - Turner, J. W. G.

AU - Pearson, R. J.

AU - Bassett, M. D.

AU - Blundell, D. W.

AU - Taitt, D. W.

N1 - SAE Paper no. 2005-01-1853

PY - 2005/12/1

Y1 - 2005/12/1

N2 - An expedient route to improving in-vehicle fuel economy in 4-stroke cycle engines is to reduce the swept volume of an engine and run it at a higher BMEP for any given output. The full-load performance of a larger capacity engine can be achieved through pressure charging. However, for maximum fuel economy, particularly at part-load, the expansion ratio, and consequently the compression ratio (CR) should be kept as high as possible. This is at odds with the requirement in pressure-charged gasoline engines to reduce the CR at higher loads due to the knock limit. In earlier work, the authors studied a pressure-charging system aimed at allowing a high CR to be maintained at all times. The operation of this type of system involves deliberately over-compressing the charge air, cooling it at the elevated pressure and temperature, and then expanding it down to the desired plenum pressure, ensuring a plenum temperature which can potentially become sub-atmospheric at full-load. Due to the ability to support a high fixed CR, it is possible that an engine fitted with such a charging system could achieve fuel economy equal to or better than a Variable Compression Ratio unit, while permitting conventional engine architecture and assembly lines. The concept has been termed "Turboexpansion". This paper analyses some initial test bed results taken from an engine fitted with such a charging system, and discusses future development work intended to establish further the validity of the concept and hence its feasibility as a tool to facilitate aggressive engine downsizing. Additional theoretical analysis is presented which indicates constraints on the effectiveness of the system in terms of its sensitivity to the separate component efficiencies.

AB - An expedient route to improving in-vehicle fuel economy in 4-stroke cycle engines is to reduce the swept volume of an engine and run it at a higher BMEP for any given output. The full-load performance of a larger capacity engine can be achieved through pressure charging. However, for maximum fuel economy, particularly at part-load, the expansion ratio, and consequently the compression ratio (CR) should be kept as high as possible. This is at odds with the requirement in pressure-charged gasoline engines to reduce the CR at higher loads due to the knock limit. In earlier work, the authors studied a pressure-charging system aimed at allowing a high CR to be maintained at all times. The operation of this type of system involves deliberately over-compressing the charge air, cooling it at the elevated pressure and temperature, and then expanding it down to the desired plenum pressure, ensuring a plenum temperature which can potentially become sub-atmospheric at full-load. Due to the ability to support a high fixed CR, it is possible that an engine fitted with such a charging system could achieve fuel economy equal to or better than a Variable Compression Ratio unit, while permitting conventional engine architecture and assembly lines. The concept has been termed "Turboexpansion". This paper analyses some initial test bed results taken from an engine fitted with such a charging system, and discusses future development work intended to establish further the validity of the concept and hence its feasibility as a tool to facilitate aggressive engine downsizing. Additional theoretical analysis is presented which indicates constraints on the effectiveness of the system in terms of its sensitivity to the separate component efficiencies.

UR - http://dx.doi.org/10.4271/2005-01-1853

U2 - 10.4271/2005-01-1853

DO - 10.4271/2005-01-1853

M3 - Conference contribution

BT - SAE Technical Papers

ER -