Structure and properties of binder gels formed in the system Mg(OH)2-SiO2-H2O for immobilisation of Magnox sludge

S.A. Walling, H. Kinoshita, S.A. Bernal, N.C. Collier, J.L. Provis

Research output: Contribution to journalArticlepeer-review

126 Citations (SciVal)

Abstract



A cementitious system for the immobilisation of magnesium rich Magnox sludge was produced by blending an Mg(OH)2 slurry with silica fume and an inorganic phosphate dispersant. The Mg(OH)2 was fully consumed after 28 days of curing, producing a disordered magnesium silicate hydrate (M–S–H) with cementitious properties. The structural characterisation of this M–S–H phase by 29Si and 25Mg MAS NMR showed clearly that it has strong nanostructural similarities to a disordered form of lizardite, and does not take on the talc-like structure as has been proposed in the past for M–S–H gels. The addition of sodium hexametaphosphate (NaPO3)6 as a dispersant enabled the material to be produced at a much lower water/solids ratio, while still maintaining the fluidity which is essential in practical applications, and producing a solid monolith. Significant retardation of M–S–H formation was observed with larger additions of phosphate, however the use of 1 wt% (NaPO3)6 was beneficial in increasing fluidity without a deleterious effect on M–S–H formation. This work has demonstrated the feasibility of using M–S–H as binder to structurally immobilise Magnox sludge, enabling the conversion of a waste into a cementitious binder with potentially very high waste loadings, and providing the first detailed nanostructural description of the material thus formed.
Original languageEnglish
Pages (from-to)8126-8137
JournalDalton Transactions
Volume44
Issue number17
DOIs
Publication statusPublished - 7 May 2015

Fingerprint

Dive into the research topics of 'Structure and properties of binder gels formed in the system Mg(OH)2-SiO2-H2O for immobilisation of Magnox sludge'. Together they form a unique fingerprint.

Cite this