STATCOM and SVC control operations and optimization during network fault conditions

Tariq Masood, Raj K Aggarwal, S A Qureshi, R A J Khan

Research output: Chapter in Book/Report/Conference proceedingChapter

6 Citations (Scopus)

Abstract

Herein, the proposed work is a non-traditional optimization technique which has been adopted to optimize the various process control parameters that contribute notably to control STATCOM and SVC device operations in a power system network during any undesired condition. The simulation was performed by taking into account STATCOM and SVC process control parameters; hereby the controller was also configured in strategic ways to optimize the control model under both steady state and dynamic performances. The optimization process results have clearly indicated that the introduction of STATCOM device in the right location of the system increases the loadability and sustainability of the power system through optimization process. The new control can thus be effectively used for this type of optimization process.
Original languageEnglish
Title of host publication2010 IEEE International Symposium on Industrial Electronics
Place of PublicationPiscataway, NJ
PublisherIEEE
Pages1088-1091
Number of pages4
ISBN (Electronic)978-1-4244-6392-3
ISBN (Print)978-1-4244-6390-9
DOIs
Publication statusPublished - Jul 2010
Event2010 IEEE International Symposium on Industrial Electronics - Bari, Italy
Duration: 4 Jul 20107 Jul 2010

Conference

Conference2010 IEEE International Symposium on Industrial Electronics
Abbreviated titleISIE 2010
CountryItaly
CityBari
Period4/07/107/07/10

Fingerprint

Process control
Sustainable development
Controllers
Static synchronous compensators
Static Var compensators

Cite this

Masood, T., Aggarwal, R. K., Qureshi, S. A., & Khan, R. A. J. (2010). STATCOM and SVC control operations and optimization during network fault conditions. In 2010 IEEE International Symposium on Industrial Electronics (pp. 1088-1091). Piscataway, NJ: IEEE. https://doi.org/10.1109/ISIE.2010.5636868

STATCOM and SVC control operations and optimization during network fault conditions. / Masood, Tariq; Aggarwal, Raj K; Qureshi, S A; Khan, R A J.

2010 IEEE International Symposium on Industrial Electronics. Piscataway, NJ : IEEE, 2010. p. 1088-1091.

Research output: Chapter in Book/Report/Conference proceedingChapter

Masood, T, Aggarwal, RK, Qureshi, SA & Khan, RAJ 2010, STATCOM and SVC control operations and optimization during network fault conditions. in 2010 IEEE International Symposium on Industrial Electronics. IEEE, Piscataway, NJ, pp. 1088-1091, 2010 IEEE International Symposium on Industrial Electronics, Bari, Italy, 4/07/10. https://doi.org/10.1109/ISIE.2010.5636868
Masood T, Aggarwal RK, Qureshi SA, Khan RAJ. STATCOM and SVC control operations and optimization during network fault conditions. In 2010 IEEE International Symposium on Industrial Electronics. Piscataway, NJ: IEEE. 2010. p. 1088-1091 https://doi.org/10.1109/ISIE.2010.5636868
Masood, Tariq ; Aggarwal, Raj K ; Qureshi, S A ; Khan, R A J. / STATCOM and SVC control operations and optimization during network fault conditions. 2010 IEEE International Symposium on Industrial Electronics. Piscataway, NJ : IEEE, 2010. pp. 1088-1091
@inbook{26adaf1a250f4799a0f4c3abf52f6c80,
title = "STATCOM and SVC control operations and optimization during network fault conditions",
abstract = "Herein, the proposed work is a non-traditional optimization technique which has been adopted to optimize the various process control parameters that contribute notably to control STATCOM and SVC device operations in a power system network during any undesired condition. The simulation was performed by taking into account STATCOM and SVC process control parameters; hereby the controller was also configured in strategic ways to optimize the control model under both steady state and dynamic performances. The optimization process results have clearly indicated that the introduction of STATCOM device in the right location of the system increases the loadability and sustainability of the power system through optimization process. The new control can thus be effectively used for this type of optimization process.",
author = "Tariq Masood and Aggarwal, {Raj K} and Qureshi, {S A} and Khan, {R A J}",
year = "2010",
month = "7",
doi = "10.1109/ISIE.2010.5636868",
language = "English",
isbn = "978-1-4244-6390-9",
pages = "1088--1091",
booktitle = "2010 IEEE International Symposium on Industrial Electronics",
publisher = "IEEE",
address = "USA United States",

}

TY - CHAP

T1 - STATCOM and SVC control operations and optimization during network fault conditions

AU - Masood, Tariq

AU - Aggarwal, Raj K

AU - Qureshi, S A

AU - Khan, R A J

PY - 2010/7

Y1 - 2010/7

N2 - Herein, the proposed work is a non-traditional optimization technique which has been adopted to optimize the various process control parameters that contribute notably to control STATCOM and SVC device operations in a power system network during any undesired condition. The simulation was performed by taking into account STATCOM and SVC process control parameters; hereby the controller was also configured in strategic ways to optimize the control model under both steady state and dynamic performances. The optimization process results have clearly indicated that the introduction of STATCOM device in the right location of the system increases the loadability and sustainability of the power system through optimization process. The new control can thus be effectively used for this type of optimization process.

AB - Herein, the proposed work is a non-traditional optimization technique which has been adopted to optimize the various process control parameters that contribute notably to control STATCOM and SVC device operations in a power system network during any undesired condition. The simulation was performed by taking into account STATCOM and SVC process control parameters; hereby the controller was also configured in strategic ways to optimize the control model under both steady state and dynamic performances. The optimization process results have clearly indicated that the introduction of STATCOM device in the right location of the system increases the loadability and sustainability of the power system through optimization process. The new control can thus be effectively used for this type of optimization process.

UR - http://dx.doi.org/10.1109/ISIE.2010.5636868

U2 - 10.1109/ISIE.2010.5636868

DO - 10.1109/ISIE.2010.5636868

M3 - Chapter

SN - 978-1-4244-6390-9

SP - 1088

EP - 1091

BT - 2010 IEEE International Symposium on Industrial Electronics

PB - IEEE

CY - Piscataway, NJ

ER -