Skip to main navigation Skip to search Skip to main content

Simultaneous evaporation and imbibition of a droplet on a fully flooded porous substrate

  • University of Strathclyde
  • University of Edinburgh

Research output: Contribution to journal › Article › peer-review

3 Downloads (Pure)

Abstract

A mathematical model for the evolution of, and deposition from, a thin particle-laden droplet on an infinitely thick, isotropic, fully flooded, porous substrate with interconnected pores undergoing simultaneous evaporation and imbibition is formulated and analyzed. In particular, analytical expressions for the evolution of the droplet, as well as for the flow within the droplet and the substrate, and for the transport and deposition onto the substrate of the particles are obtained for droplets evolving in four different modes. While the physical mechanisms driving evaporation (namely the diffusion-driven flow of vapor in the atmosphere away from the free surface of the droplet) and imbibition (namely the pressure-driven flow of liquid in the substrate away from the base of the droplet) are rather different, perhaps rather unexpectedly, it is found that there are a number of qualitative and quantitative similarities as well as differences in the resulting behavior of the droplet as it loses mass to its environment. For example, it is shown that a droplet undergoing pure imbibition in the constant contact radius mode never completely imbibes (i.e., it has an infinitely long lifetime), but if it evaporates (either with or without imbibition also occurring), then it has a finite lifetime, and increasing the strength of evaporation and/or imbibition shortens its lifetime. It is also shown that in the regime in which diffusion of particles is faster than axial advection but slower than radial advection of particles, the final deposit of particles left behind on the substrate after the droplet has completely evaporated and/or imbibed is independent of both the nature and the strength of the physical mechanism(s) driving the mass loss from the droplet. Not only are these results of theoretical interest, but they are also relevant to a wide variety of practical applications, including ink-jet printing, DNA chip manufacturing, and disease diagnostics, that would benefit from an improved ability to predict and/or control the final deposit pattern from a droplet undergoing simultaneous evaporation and imbibition.

Original languageEnglish
Article number093601
Number of pages43
JournalPhysical Review Fluids
Volume11
Issue number9
Early online date14 Sept 2026
DOIs
Publication statusE-pub ahead of print - 14 Sept 2026

Data Availability Statement

There are no publicly available research data or software supporting this manuscript. Requests for further information or data should be sent to the authors.

Acknowledgements

D.C. gratefully acknowledges the support of the United Kingdom Engineering and PhysicalSciences Research Council (EPSRC) via a Mathematical Sciences Doctoral Training Partnership(DTP) Studentship held at the University of Strathclyde in Glasgow (Grant No. EP/W52394X/1).All of the authors thank Dr. Hannah-May D’Ambrosio (University of Glasgow) for sharing apreliminary version of her work on deposition from an evaporating droplet with a moving contactline, recently published as D’Ambrosio et al. [49], and for her insightful comments on a draft versionof the present manuscript

Funding

D.C. gratefully acknowledges the support of the United Kingdom Engineering and Physical Sciences Research Council (EPSRC) via a Mathematical Sciences Doctoral Training Partnership (DTP) Studentship held at the University of Strathclyde in Glasgow (Grant No. EP/W52394X/1). All of the authors thank Dr. Hannah-May D’Ambrosio (University of Glasgow) for sharing a preliminary version of her work on deposition from an evaporating droplet with a moving contact line, recently published as D’Ambrosio et al. [49], and for her insightful comments on a draft version of the present manuscript.

FundersFunder number
Engineering and Physical Sciences Research CouncilEP/W52394X/1

ASJC Scopus subject areas

  • Computational Mechanics
  • Modelling and Simulation
  • Fluid Flow and Transfer Processes

Fingerprint

Dive into the research topics of 'Simultaneous evaporation and imbibition of a droplet on a fully flooded porous substrate'. Together they form a unique fingerprint.

Cite this