Product Renovation and shared ownership: Sustainable routes to satisfying the World’s growing demand for goods

John Rogers, Sam Cooper, Danielle Densley Tingley , Simone Cooper, Naomi Brathwaite, Mariale Moreno, Alex Rodrigues, Giuseppe Salvia

Research output: Contribution to conferencePaper

Abstract

It has been estimated that by 2030 the number of people who are wealthy enough to be considered as middle class consumers will have tripled. This will have a dramatic impact on the demands for primary materials and energy. Much work has been carried out on sustainable ways of meeting the World’s energy demands and some work has been carried out on the sustainable production and consumption of goods. It has been estimated that with improvements in design and manufacturing it is possible to reduce the primary material requirements by 30% to produce the current demand for goods. Whilst this is a crucial step on the production side, there will still be a doubling of primary material requirements by the end of the century because of an absolute rise in demand for goods and services. It is therefore clear that the consumption of products must also be explored. This is a key areas of research for the UK INDEMAND centre, which is investigating ways of reducing the UK’s industrial energy demand and demand for energy intensive materials. Our ongoing work shows that two strategies would result in considerable reductions in the demand for primary materials: product longevity and using goods more intensively ( which may requires increased durability). Product longevity and durability are not new ideas, but ones that can be applied across a raft of goods as methods of reducing the consumption of materials. With long life products there is a potential risk of outdated design and obsolescence, consequently there is a need to ensure upgradability and adaptability are incorporated at the design stage. If products last longer, then the production of new products can be diverted to emerging markets rather than the market for replacement goods. There are many goods which are only used occasionally, these goods do not normally wear out. The total demand for such could be drastically reduced if they were shared with other people. Sharing of goods has traditionally been conducted between friends or by hiring equipment. The use of modern communication systems and social media could enable the development of sharing co-ops and swap spaces that will increase the utilisation of goods and hence reduce the demand for new goods. This could also increase access to a range of goods for those on low incomes. From a series of workshops it has been found that the principal challenges are sociological rather than technological. This paper contains a discussion of these challenges and explores possible futures where these two strategies have been adopted. In addition, the barriers and opportunities that these strategies offer for consumers and businesses are identified, and areas where government policy could be instigated to bring about change are highlighted.

Conference

ConferenceGlobal Conference on Energy and Sustainable Development 2015
CountryUK United Kingdom
CityCoventry
Period24/02/1526/02/15

Fingerprint

Ownership
Energy
Durability
Energy demand
Emerging markets
Adaptability
New products
Government policy
Sustainable consumption and production
Low income
Obsolescence
Hiring
Social media
Swaps
Replacement
Middle class
Manufacturing
Communication systems

Cite this

Rogers, J., Cooper, S., Densley Tingley , D., Cooper, S., Brathwaite, N., Moreno, M., ... Salvia, G. (2015). Product Renovation and shared ownership: Sustainable routes to satisfying the World’s growing demand for goods. 20-27. Paper presented at Global Conference on Energy and Sustainable Development 2015, Coventry, UK United Kingdom.

Product Renovation and shared ownership : Sustainable routes to satisfying the World’s growing demand for goods. / Rogers, John; Cooper, Sam; Densley Tingley , Danielle; Cooper, Simone; Brathwaite, Naomi; Moreno, Mariale; Rodrigues, Alex; Salvia, Giuseppe.

2015. 20-27 Paper presented at Global Conference on Energy and Sustainable Development 2015, Coventry, UK United Kingdom.

Research output: Contribution to conferencePaper

Rogers, J, Cooper, S, Densley Tingley , D, Cooper, S, Brathwaite, N, Moreno, M, Rodrigues, A & Salvia, G 2015, 'Product Renovation and shared ownership: Sustainable routes to satisfying the World’s growing demand for goods' Paper presented at Global Conference on Energy and Sustainable Development 2015, Coventry, UK United Kingdom, 24/02/15 - 26/02/15, pp. 20-27.
Rogers J, Cooper S, Densley Tingley D, Cooper S, Brathwaite N, Moreno M et al. Product Renovation and shared ownership: Sustainable routes to satisfying the World’s growing demand for goods. 2015. Paper presented at Global Conference on Energy and Sustainable Development 2015, Coventry, UK United Kingdom.
Rogers, John ; Cooper, Sam ; Densley Tingley , Danielle ; Cooper, Simone ; Brathwaite, Naomi ; Moreno, Mariale ; Rodrigues, Alex ; Salvia, Giuseppe. / Product Renovation and shared ownership : Sustainable routes to satisfying the World’s growing demand for goods. Paper presented at Global Conference on Energy and Sustainable Development 2015, Coventry, UK United Kingdom.7 p.
@conference{3bbda3df589f48729563c0fbed459eb1,
title = "Product Renovation and shared ownership: Sustainable routes to satisfying the World’s growing demand for goods",
abstract = "It has been estimated that by 2030 the number of people who are wealthy enough to be considered as middle class consumers will have tripled. This will have a dramatic impact on the demands for primary materials and energy. Much work has been carried out on sustainable ways of meeting the World’s energy demands and some work has been carried out on the sustainable production and consumption of goods. It has been estimated that with improvements in design and manufacturing it is possible to reduce the primary material requirements by 30{\%} to produce the current demand for goods. Whilst this is a crucial step on the production side, there will still be a doubling of primary material requirements by the end of the century because of an absolute rise in demand for goods and services. It is therefore clear that the consumption of products must also be explored. This is a key areas of research for the UK INDEMAND centre, which is investigating ways of reducing the UK’s industrial energy demand and demand for energy intensive materials. Our ongoing work shows that two strategies would result in considerable reductions in the demand for primary materials: product longevity and using goods more intensively ( which may requires increased durability). Product longevity and durability are not new ideas, but ones that can be applied across a raft of goods as methods of reducing the consumption of materials. With long life products there is a potential risk of outdated design and obsolescence, consequently there is a need to ensure upgradability and adaptability are incorporated at the design stage. If products last longer, then the production of new products can be diverted to emerging markets rather than the market for replacement goods. There are many goods which are only used occasionally, these goods do not normally wear out. The total demand for such could be drastically reduced if they were shared with other people. Sharing of goods has traditionally been conducted between friends or by hiring equipment. The use of modern communication systems and social media could enable the development of sharing co-ops and swap spaces that will increase the utilisation of goods and hence reduce the demand for new goods. This could also increase access to a range of goods for those on low incomes. From a series of workshops it has been found that the principal challenges are sociological rather than technological. This paper contains a discussion of these challenges and explores possible futures where these two strategies have been adopted. In addition, the barriers and opportunities that these strategies offer for consumers and businesses are identified, and areas where government policy could be instigated to bring about change are highlighted.",
author = "John Rogers and Sam Cooper and {Densley Tingley}, Danielle and Simone Cooper and Naomi Brathwaite and Mariale Moreno and Alex Rodrigues and Giuseppe Salvia",
year = "2015",
month = "5",
day = "5",
language = "English",
pages = "20--27",
note = "Global Conference on Energy and Sustainable Development 2015 ; Conference date: 24-02-2015 Through 26-02-2015",

}

TY - CONF

T1 - Product Renovation and shared ownership

T2 - Sustainable routes to satisfying the World’s growing demand for goods

AU - Rogers,John

AU - Cooper,Sam

AU - Densley Tingley ,Danielle

AU - Cooper,Simone

AU - Brathwaite,Naomi

AU - Moreno,Mariale

AU - Rodrigues,Alex

AU - Salvia,Giuseppe

PY - 2015/5/5

Y1 - 2015/5/5

N2 - It has been estimated that by 2030 the number of people who are wealthy enough to be considered as middle class consumers will have tripled. This will have a dramatic impact on the demands for primary materials and energy. Much work has been carried out on sustainable ways of meeting the World’s energy demands and some work has been carried out on the sustainable production and consumption of goods. It has been estimated that with improvements in design and manufacturing it is possible to reduce the primary material requirements by 30% to produce the current demand for goods. Whilst this is a crucial step on the production side, there will still be a doubling of primary material requirements by the end of the century because of an absolute rise in demand for goods and services. It is therefore clear that the consumption of products must also be explored. This is a key areas of research for the UK INDEMAND centre, which is investigating ways of reducing the UK’s industrial energy demand and demand for energy intensive materials. Our ongoing work shows that two strategies would result in considerable reductions in the demand for primary materials: product longevity and using goods more intensively ( which may requires increased durability). Product longevity and durability are not new ideas, but ones that can be applied across a raft of goods as methods of reducing the consumption of materials. With long life products there is a potential risk of outdated design and obsolescence, consequently there is a need to ensure upgradability and adaptability are incorporated at the design stage. If products last longer, then the production of new products can be diverted to emerging markets rather than the market for replacement goods. There are many goods which are only used occasionally, these goods do not normally wear out. The total demand for such could be drastically reduced if they were shared with other people. Sharing of goods has traditionally been conducted between friends or by hiring equipment. The use of modern communication systems and social media could enable the development of sharing co-ops and swap spaces that will increase the utilisation of goods and hence reduce the demand for new goods. This could also increase access to a range of goods for those on low incomes. From a series of workshops it has been found that the principal challenges are sociological rather than technological. This paper contains a discussion of these challenges and explores possible futures where these two strategies have been adopted. In addition, the barriers and opportunities that these strategies offer for consumers and businesses are identified, and areas where government policy could be instigated to bring about change are highlighted.

AB - It has been estimated that by 2030 the number of people who are wealthy enough to be considered as middle class consumers will have tripled. This will have a dramatic impact on the demands for primary materials and energy. Much work has been carried out on sustainable ways of meeting the World’s energy demands and some work has been carried out on the sustainable production and consumption of goods. It has been estimated that with improvements in design and manufacturing it is possible to reduce the primary material requirements by 30% to produce the current demand for goods. Whilst this is a crucial step on the production side, there will still be a doubling of primary material requirements by the end of the century because of an absolute rise in demand for goods and services. It is therefore clear that the consumption of products must also be explored. This is a key areas of research for the UK INDEMAND centre, which is investigating ways of reducing the UK’s industrial energy demand and demand for energy intensive materials. Our ongoing work shows that two strategies would result in considerable reductions in the demand for primary materials: product longevity and using goods more intensively ( which may requires increased durability). Product longevity and durability are not new ideas, but ones that can be applied across a raft of goods as methods of reducing the consumption of materials. With long life products there is a potential risk of outdated design and obsolescence, consequently there is a need to ensure upgradability and adaptability are incorporated at the design stage. If products last longer, then the production of new products can be diverted to emerging markets rather than the market for replacement goods. There are many goods which are only used occasionally, these goods do not normally wear out. The total demand for such could be drastically reduced if they were shared with other people. Sharing of goods has traditionally been conducted between friends or by hiring equipment. The use of modern communication systems and social media could enable the development of sharing co-ops and swap spaces that will increase the utilisation of goods and hence reduce the demand for new goods. This could also increase access to a range of goods for those on low incomes. From a series of workshops it has been found that the principal challenges are sociological rather than technological. This paper contains a discussion of these challenges and explores possible futures where these two strategies have been adopted. In addition, the barriers and opportunities that these strategies offer for consumers and businesses are identified, and areas where government policy could be instigated to bring about change are highlighted.

M3 - Paper

SP - 20

EP - 27

ER -