Non-Volatile Conductive Gels Made From Deep Eutectic Solvents and Oxidised Cellulose Nanofibrils

Saffron J Bryant, Marcelo A. Da Silva, Kazi M. Zakir Hossain, Vincenzo Calabrese, Janet L Scott, Karen J Edler

Research output: Contribution to journalArticlepeer-review

21 Citations (SciVal)

Abstract



Ionogels offer huge potential for a number of applications including wearable electronics and soft sensors. However, their synthesis has been limited and often relies on non-renewable or non-biocompatible components. Here we present a novel two-component ionogel made using just deep eutectic solvents (DESs) and cellulose. DESs offer a non-volatile alternative to hydrogels with highly tuneable properties including conductivity and solvation of compounds with widely varying hydrophobicity. DESs can be easily made from cheap, biodegradable and biocompatible components. This research presents the characterisation of a series of soft conductive gels made from deep eutectic solvents (DESs), specifically choline chloride-urea and choline chloride-glycerol, with the sole addition of TEMPO-oxidised cellulose nanofibrils (OCNF). A more liquid-like rather than gel-like conductive material could be made by using the DES betaine–glycerol. OCNF are prepared from sustainable sources, and are non-toxic, and mild on the skin, forming gels without the need for surfactants or other gelling agents. These DES-OCNF gels are shear thinning with conductivities up to 1.7 mS cm−1 at ∼26 °C. Given the thousands of possible DESs, this system offers unmatched tunability and customisation for properties such as viscosity, conductivity, and yield behaviour.
Original languageEnglish
Pages (from-to)2252-2260
JournalNanoscale Advances
Volume3
Issue number8
Early online date2 Mar 2021
DOIs
Publication statusPublished - 21 Apr 2021

Funding

SB, M. A. D. S., and K. M. Z. H thank EPRSC for funding this project (grant EP/N033310/1). V. C. thanks the University of Bath for supporting his PhD The authors gratefully acknowledge the Material and Chemical Characterisation Facility (MC2) at University of Bath https://doi.org/10.15125/mx6j-3r54) for technical support and assistance in this work. This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView contains code developed with funding from the European Union's Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000. Data supporting this work are freely accessible in the Bath research data archive system at DOI: 10.15125/BATH-00978. SB, M. A. D. S., and K. M. Z. H thank EPRSC for funding this project (grant EP/N033310/1). V. C. thanks the University of Bath for supporting his PhD The authors gratefully acknowledge the Material and Chemical Characterisation Facility (MC2) at University of Bath (https://doi.org/10.15125/mx6j-3r54) for technical support and assistance in this work. This work beneted from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView contains code developed with funding from the European Union's Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000. Data supporting this work are freely accessible in the Bath research data archive system at DOI: 10.15125/BATH-00978.

Fingerprint

Dive into the research topics of 'Non-Volatile Conductive Gels Made From Deep Eutectic Solvents and Oxidised Cellulose Nanofibrils'. Together they form a unique fingerprint.

Cite this