Measurement and compensation of pivot point positional error on five-axis machine tools

Bing Yang; Mark Chappell; Jody Muelaner; Guido Florussen; Paul Maropoulos

Measurement and compensation of pivot point positional error on five-axis machine tools

Bing Yang, Mark Chappell, Jody Muelaner, Guido Florussen, Paul Maropoulos

Department of Mechanical Engineering

IBS Precision Engineering BV

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Abstract

Measuring and compensating the pivot points of five-axis machine tools is always challenging and very time consuming. This paper presents a newly developed approach for automatic measurement and compensation of pivot point positional errors on five-axis machine tools. Machine rotary axis errors are measured using a circular test. This method has been tested on five-axis machine tools with swivel table configuration. Results show that up to 99% of the positional errors of the rotary axis can be compensated by using this approach.

Original language	English
Title of host publication	The 38th International MATADOR Conference, 2015
Publication status	Published - 2015
Event	The 38th International MATADOR Conference, 2015 - Yunlin, Taiwan Duration: 28 Mar 2015 → 30 Mar 2015

Conference

Conference	The 38th International MATADOR Conference, 2015
Country/Territory	Taiwan
City	Yunlin
Period	28/03/15 → 30/03/15

Cite this

@inproceedings{cb3fdc30d40a48d8b66f5c226182aebe,

title = "Measurement and compensation of pivot point positional error on five-axis machine tools",

abstract = "Measuring and compensating the pivot points of five-axis machine tools is always challenging and very time consuming. This paper presents a newly developed approach for automatic measurement and compensation of pivot point positional errors on five-axis machine tools. Machine rotary axis errors are measured using a circular test. This method has been tested on five-axis machine tools with swivel table configuration. Results show that up to 99% of the positional errors of the rotary axis can be compensated by using this approach.",

author = "Bing Yang and Mark Chappell and Jody Muelaner and Guido Florussen and Paul Maropoulos",

year = "2015",

language = "English",

booktitle = "The 38th International MATADOR Conference, 2015",

note = "The 38th International MATADOR Conference, 2015 ; Conference date: 28-03-2015 Through 30-03-2015",

}

TY - GEN

T1 - Measurement and compensation of pivot point positional error on five-axis machine tools

AU - Yang, Bing

AU - Chappell, Mark

AU - Muelaner, Jody

AU - Florussen, Guido

AU - Maropoulos, Paul

PY - 2015

Y1 - 2015

N2 - Measuring and compensating the pivot points of five-axis machine tools is always challenging and very time consuming. This paper presents a newly developed approach for automatic measurement and compensation of pivot point positional errors on five-axis machine tools. Machine rotary axis errors are measured using a circular test. This method has been tested on five-axis machine tools with swivel table configuration. Results show that up to 99% of the positional errors of the rotary axis can be compensated by using this approach.

AB - Measuring and compensating the pivot points of five-axis machine tools is always challenging and very time consuming. This paper presents a newly developed approach for automatic measurement and compensation of pivot point positional errors on five-axis machine tools. Machine rotary axis errors are measured using a circular test. This method has been tested on five-axis machine tools with swivel table configuration. Results show that up to 99% of the positional errors of the rotary axis can be compensated by using this approach.

M3 - Chapter in a published conference proceeding

BT - The 38th International MATADOR Conference, 2015

T2 - The 38th International MATADOR Conference, 2015

Y2 - 28 March 2015 through 30 March 2015

ER -

Measurement and compensation of pivot point positional error on five-axis machine tools

Abstract

Conference

Fingerprint

Cite this