Interleaved switching topology for three-phase power-factor correction

Viboon Chunkag; Francis Robinson

doi:10.1049/cp:19940978

Interleaved switching topology for three-phase power-factor correction

Department of Electronic & Electrical Engineering

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

239 Downloads (Pure)

Abstract

Single-switch boost stages, connected between three-phase rectifiers and DC link capacitors, allow good power factor correction when operated in the discontinuous conduction mode. This paper is presented to aid design at all operating levels of this power converter type. For high output power, it is shown that reduced component stress and higher power factor results from the use of interleaved switching topologies. Some experimental results from a laboratory model are presented

Original language	English
Title of host publication	Fifth International Conference on Power Electronics and Variable-Speed Drives
Publisher	IET
Pages	280-285
Number of pages	6
DOIs	https://doi.org/10.1049/cp:19940978
Publication status	Published - 31 Oct 1994
Event	Fifth International Conference on Power Electronics and Variable-Speed Drives - London, UK United Kingdom Duration: 26 Oct 1994 → 28 Oct 1994

Conference

Conference	Fifth International Conference on Power Electronics and Variable-Speed Drives
Country/Territory	UK United Kingdom
City	London
Period	26/10/94 → 28/10/94

Access to Document

10.1049/cp:19940978

Interleaved switching topology for three-phase power-factor correction
This paper is a postprint of a paper submitted to and accepted for publication in IET and is subject to Institution of Engineering and Technology Copyright. the copy of record is available at IET Digital Library.
Accepted author manuscript, 317 KB

Cite this

@inproceedings{3105468080f9400baa7fa20a279e5e18,

title = "Interleaved switching topology for three-phase power-factor correction",

abstract = "Single-switch boost stages, connected between three-phase rectifiers and DC link capacitors, allow good power factor correction when operated in the discontinuous conduction mode. This paper is presented to aid design at all operating levels of this power converter type. For high output power, it is shown that reduced component stress and higher power factor results from the use of interleaved switching topologies. Some experimental results from a laboratory model are presented",

author = "Viboon Chunkag and Francis Robinson",

year = "1994",

month = oct,

day = "31",

doi = "10.1049/cp:19940978",

language = "English",

pages = "280--285",

booktitle = "Fifth International Conference on Power Electronics and Variable-Speed Drives",

publisher = "IET",

note = "Fifth International Conference on Power Electronics and Variable-Speed Drives ; Conference date: 26-10-1994 Through 28-10-1994",

}

TY - GEN

T1 - Interleaved switching topology for three-phase power-factor correction

AU - Chunkag, Viboon

AU - Robinson, Francis

PY - 1994/10/31

Y1 - 1994/10/31

N2 - Single-switch boost stages, connected between three-phase rectifiers and DC link capacitors, allow good power factor correction when operated in the discontinuous conduction mode. This paper is presented to aid design at all operating levels of this power converter type. For high output power, it is shown that reduced component stress and higher power factor results from the use of interleaved switching topologies. Some experimental results from a laboratory model are presented

AB - Single-switch boost stages, connected between three-phase rectifiers and DC link capacitors, allow good power factor correction when operated in the discontinuous conduction mode. This paper is presented to aid design at all operating levels of this power converter type. For high output power, it is shown that reduced component stress and higher power factor results from the use of interleaved switching topologies. Some experimental results from a laboratory model are presented

UR - http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=341569

U2 - 10.1049/cp:19940978

DO - 10.1049/cp:19940978

M3 - Chapter in a published conference proceeding

SP - 280

EP - 285

BT - Fifth International Conference on Power Electronics and Variable-Speed Drives

PB - IET

T2 - Fifth International Conference on Power Electronics and Variable-Speed Drives

Y2 - 26 October 1994 through 28 October 1994

ER -

Interleaved switching topology for three-phase power-factor correction

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this