Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections

D. Smedley, J. Tiew, Adlin Roseley, Z. Ahmad, M.P. Ansell

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In order to promote the use of indigenous hardwoods in construction in Malaysia the Malaysian Timber Industry Board (MTIB) commissioned a large-scale timber structure in Johor, designed by a local architect. The building is an exhibition hall with a floor area of 4, 686m and the form of the building is defined by three shell-shaped halls each comprised of 39 glue-laminated arches. Each arch is constructed from seven glue-laminated Keruing (Diptercarpaceae) elements connected by bonded-in steel rods using Rotafix thixotropic epoxy adhesive. The structure is supported on a raised concrete foundation and the moment-resisting framework is clad in 12mm Malaysian marine ply attached to rolled zinc sheet onto which is fixed Belian (Eusideroxylon zwageri) shingles from Sarawak. Glue-laminated timber (glulam) was manufactured close to the construction site using PRF adhesive and the glulam elements were assembled partially in the factory and partially on site using double-ended galvanised steel rods with 15mm solid steel plate separators. The bonded-in construction technique allowed connections to be hidden and assembly to proceed rapidly on site. The paper describes all aspects of the construction process in conditions of high humidity and rainfall and temperatures reaching 37°C. The structure has been instrumented at the joints in order to continuously assess temperature and any movement in the completed building and initial results of this assessment are reported.
Original languageEnglish
Title of host publicationWorld Conference on Timber Engineering 2012, WCTE 2012
Pages502-503
Number of pages2
Volume1
Publication statusPublished - 2012
Event12th World Conference on Timber Engineering - Auckland, New Zealand
Duration: 15 Jul 201219 Jul 2012

Conference

Conference12th World Conference on Timber Engineering
CountryNew Zealand
CityAuckland
Period15/07/1219/07/12

Fingerprint

Glues
Hardwoods
Timber
Arches
Steel
Adhesives
Separators
Rain
Industrial plants
Atmospheric humidity
Zinc
Concretes
Temperature
Industry

Cite this

Smedley, D., Tiew, J., Roseley, A., Ahmad, Z., & Ansell, M. P. (2012). Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. In World Conference on Timber Engineering 2012, WCTE 2012 (Vol. 1, pp. 502-503)

Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. / Smedley, D.; Tiew, J.; Roseley, Adlin; Ahmad, Z.; Ansell, M.P.

World Conference on Timber Engineering 2012, WCTE 2012. Vol. 1 2012. p. 502-503.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Smedley, D, Tiew, J, Roseley, A, Ahmad, Z & Ansell, MP 2012, Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. in World Conference on Timber Engineering 2012, WCTE 2012. vol. 1, pp. 502-503, 12th World Conference on Timber Engineering, Auckland, New Zealand, 15/07/12.
Smedley D, Tiew J, Roseley A, Ahmad Z, Ansell MP. Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. In World Conference on Timber Engineering 2012, WCTE 2012. Vol. 1. 2012. p. 502-503
Smedley, D. ; Tiew, J. ; Roseley, Adlin ; Ahmad, Z. ; Ansell, M.P. / Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections. World Conference on Timber Engineering 2012, WCTE 2012. Vol. 1 2012. pp. 502-503
@inproceedings{7eeeb2bdf8af431896c67bd392da085f,
title = "Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections",
abstract = "In order to promote the use of indigenous hardwoods in construction in Malaysia the Malaysian Timber Industry Board (MTIB) commissioned a large-scale timber structure in Johor, designed by a local architect. The building is an exhibition hall with a floor area of 4, 686m and the form of the building is defined by three shell-shaped halls each comprised of 39 glue-laminated arches. Each arch is constructed from seven glue-laminated Keruing (Diptercarpaceae) elements connected by bonded-in steel rods using Rotafix thixotropic epoxy adhesive. The structure is supported on a raised concrete foundation and the moment-resisting framework is clad in 12mm Malaysian marine ply attached to rolled zinc sheet onto which is fixed Belian (Eusideroxylon zwageri) shingles from Sarawak. Glue-laminated timber (glulam) was manufactured close to the construction site using PRF adhesive and the glulam elements were assembled partially in the factory and partially on site using double-ended galvanised steel rods with 15mm solid steel plate separators. The bonded-in construction technique allowed connections to be hidden and assembly to proceed rapidly on site. The paper describes all aspects of the construction process in conditions of high humidity and rainfall and temperatures reaching 37°C. The structure has been instrumented at the joints in order to continuously assess temperature and any movement in the completed building and initial results of this assessment are reported.",
author = "D. Smedley and J. Tiew and Adlin Roseley and Z. Ahmad and M.P. Ansell",
year = "2012",
language = "English",
volume = "1",
pages = "502--503",
booktitle = "World Conference on Timber Engineering 2012, WCTE 2012",

}

TY - GEN

T1 - Innovative timber exhibition hall in Johor, Malaysia, constructed from indigenous hardwood using bonded-in moment-resisting connections

AU - Smedley, D.

AU - Tiew, J.

AU - Roseley, Adlin

AU - Ahmad, Z.

AU - Ansell, M.P.

PY - 2012

Y1 - 2012

N2 - In order to promote the use of indigenous hardwoods in construction in Malaysia the Malaysian Timber Industry Board (MTIB) commissioned a large-scale timber structure in Johor, designed by a local architect. The building is an exhibition hall with a floor area of 4, 686m and the form of the building is defined by three shell-shaped halls each comprised of 39 glue-laminated arches. Each arch is constructed from seven glue-laminated Keruing (Diptercarpaceae) elements connected by bonded-in steel rods using Rotafix thixotropic epoxy adhesive. The structure is supported on a raised concrete foundation and the moment-resisting framework is clad in 12mm Malaysian marine ply attached to rolled zinc sheet onto which is fixed Belian (Eusideroxylon zwageri) shingles from Sarawak. Glue-laminated timber (glulam) was manufactured close to the construction site using PRF adhesive and the glulam elements were assembled partially in the factory and partially on site using double-ended galvanised steel rods with 15mm solid steel plate separators. The bonded-in construction technique allowed connections to be hidden and assembly to proceed rapidly on site. The paper describes all aspects of the construction process in conditions of high humidity and rainfall and temperatures reaching 37°C. The structure has been instrumented at the joints in order to continuously assess temperature and any movement in the completed building and initial results of this assessment are reported.

AB - In order to promote the use of indigenous hardwoods in construction in Malaysia the Malaysian Timber Industry Board (MTIB) commissioned a large-scale timber structure in Johor, designed by a local architect. The building is an exhibition hall with a floor area of 4, 686m and the form of the building is defined by three shell-shaped halls each comprised of 39 glue-laminated arches. Each arch is constructed from seven glue-laminated Keruing (Diptercarpaceae) elements connected by bonded-in steel rods using Rotafix thixotropic epoxy adhesive. The structure is supported on a raised concrete foundation and the moment-resisting framework is clad in 12mm Malaysian marine ply attached to rolled zinc sheet onto which is fixed Belian (Eusideroxylon zwageri) shingles from Sarawak. Glue-laminated timber (glulam) was manufactured close to the construction site using PRF adhesive and the glulam elements were assembled partially in the factory and partially on site using double-ended galvanised steel rods with 15mm solid steel plate separators. The bonded-in construction technique allowed connections to be hidden and assembly to proceed rapidly on site. The paper describes all aspects of the construction process in conditions of high humidity and rainfall and temperatures reaching 37°C. The structure has been instrumented at the joints in order to continuously assess temperature and any movement in the completed building and initial results of this assessment are reported.

UR - http://www.scopus.com/inward/record.url?scp=84871952369&partnerID=8YFLogxK

UR - http://www.timberdesign.org.nz/files/00483%20Dave%20Smedley.pdf

UR - http://www.timberdesign.org.nz/WCTE2012.cfm/view/501/parent/49

M3 - Conference contribution

VL - 1

SP - 502

EP - 503

BT - World Conference on Timber Engineering 2012, WCTE 2012

ER -