Skip to main navigation Skip to search Skip to main content

Fundamental Model for Compressor Cavity Heat Transfer: Theory and Validation

Research output: Contribution to journal › Article › peer-review

17 Downloads (Pure)

Abstract

The buoyancy-driven flow inside compressor cavities is three-dimensional and unsteady and features a large range of time and length scales. The temperature and rotation of the fluid core of the cavity are influenced by an exchange (and recirculation) of enthalpy and momentum with an axial throughflow of cooling air at low radius. The complexity of the flow and conjugate nature of the heat transfer to the discs creates a challenge for the aero-engine designer when calculating thermal stresses, radial expansion, and blade-tip clearances. This article presents a low-order model to predict the radial variation of disc and fluid-core temperatures, and the mass exchange (entrainment) to the rotating cavity. Fundamental physical principles and experimental data are used to create a single set of Rayleigh–Grashof correlations for heat transfer and radial mass flow of buoyant plumes. The model is applied to 11 test cases from experimental rigs at Bath, Dresden, and Sussex, each with unique instrumentation, thermal boundary conditions, geometries, and throughflow swirl. Empirical correlations for exchange and recirculation mass flow were determined for each rig using a common theoretical methodology. The model captures the heat and mass transfer characteristics with accuracy quantified relative to experimental data. New experimental data from the Bath Compressor Cavity Rig is used to validate the model under conditions of asymmetrical heating, demonstrating the effects associated with the axial gradient of temperature in the compressor are captured appropriately. The consistent agreement with experimental data and correlation methodology demonstrates a robust framework appropriate for application to thermo-mechanical design codes in the aero-engine.

Original languageEnglish
Article number081005
Number of pages13
JournalJournal of Turbomachinery
Volume148
Issue number8
Early online date28 Apr 2026
DOIs
Publication statusPublished - 1 Aug 2026

Data Availability Statement

The authors attest that all data for this study are included in the article.

Acknowledgements

The authors are especially grateful for the support of Jake Williams and Rolls-Royce to publish the work.

Funding

The work presented here was supported by the UK Engineering and Physical Sciences Research Council and in collaboration with Rolls-Royce plc and the University of Surrey, under the grant number EP/P003702/1.

Keywords

  • buoyancy-induced flow
  • cavity and leaking flows
  • compressor cavity
  • fluid dynamics and heat transfer phenomena in compressor and turbine components of gas turbine engines
  • theoretical modelling

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Fundamental Model for Compressor Cavity Heat Transfer: Theory and Validation'. Together they form a unique fingerprint.

Cite this