TY - JOUR
T1 - Engineering solar cell absorbers by exploring the band alignment and defect disparity
T2 - the case of Cu- and Ag-based kesterite compounds
AU - Yuan, Zhen Kun
AU - Chen, Shiyou
AU - Xiang, Hongjun
AU - Gong, Xin Gao
AU - Walsh, Aron
AU - Park, Ji Sang
AU - Repins, Ingrid
AU - Wei, Su Huai
PY - 2015/11/18
Y1 - 2015/11/18
N2 - The development of kesterite Cu2ZnSn(S,Se)4 thin-film solar cells is currently hindered by the large deficit of open-circuit voltage (Voc), which results from the easy formation of CuZn antisite acceptor defects. Suppressing the formation of CuZn defects, especially near the absorber/buffer interface, is thus critical for the further improvement of kesterite solar cells. In this paper, it is shown that there is a large disparity between the defects in Cu- and Ag-based kesterite semiconductors, i.e., the CuZn or CuCd acceptor defects have high concentration and are the dominant defects in Cu2ZnSn(S,Se)4 or Cu2CdSnS4, but the AgZn acceptor has only a low concentration and the dominant defects are donors in Ag2ZnSnS4. Therefore, the Cu-based kesterites always show p-type conductivity, while the Ag-based kesterites show either intrinsic or weak n-type conductivity. Based on this defect disparity and calculated band alignment, it is proposed that the Voc limit of the kesterite solar cells can be overcome by alloying Cu2ZnSn(S,Se)4 with Ag2ZnSn(S,Se)4, and the composition-graded (Cu,Ag)2ZnSn(S,Se)4 alloys should be ideal light-absorber materials for achieving higher efficiency kesterite solar cells. A new strategy is proposed to overcome the Voc bottleneck and increase the efficiency of the kesterite solar cells. This is achieved by forming composition-graded (Cu1-xAgx)2ZnSn(S,Se)4 alloys as the absorber layer.
AB - The development of kesterite Cu2ZnSn(S,Se)4 thin-film solar cells is currently hindered by the large deficit of open-circuit voltage (Voc), which results from the easy formation of CuZn antisite acceptor defects. Suppressing the formation of CuZn defects, especially near the absorber/buffer interface, is thus critical for the further improvement of kesterite solar cells. In this paper, it is shown that there is a large disparity between the defects in Cu- and Ag-based kesterite semiconductors, i.e., the CuZn or CuCd acceptor defects have high concentration and are the dominant defects in Cu2ZnSn(S,Se)4 or Cu2CdSnS4, but the AgZn acceptor has only a low concentration and the dominant defects are donors in Ag2ZnSnS4. Therefore, the Cu-based kesterites always show p-type conductivity, while the Ag-based kesterites show either intrinsic or weak n-type conductivity. Based on this defect disparity and calculated band alignment, it is proposed that the Voc limit of the kesterite solar cells can be overcome by alloying Cu2ZnSn(S,Se)4 with Ag2ZnSn(S,Se)4, and the composition-graded (Cu,Ag)2ZnSn(S,Se)4 alloys should be ideal light-absorber materials for achieving higher efficiency kesterite solar cells. A new strategy is proposed to overcome the Voc bottleneck and increase the efficiency of the kesterite solar cells. This is achieved by forming composition-graded (Cu1-xAgx)2ZnSn(S,Se)4 alloys as the absorber layer.
KW - CuZnSn(S,Se)
KW - defects
KW - electrical conductivity
KW - kesterite semiconductors
KW - thin-film solar cells
UR - http://www.scopus.com/inward/record.url?scp=85000351116&partnerID=8YFLogxK
UR - http://dx.doi.org/10.1002/adfm.201502272
U2 - 10.1002/adfm.201502272
DO - 10.1002/adfm.201502272
M3 - Article
AN - SCOPUS:85000351116
SN - 1616-301X
VL - 25
SP - 6733
EP - 6743
JO - Advanced Functional Materials
JF - Advanced Functional Materials
IS - 43
ER -