Développement d'une Méthode d'Évaluation de la Résistance au Développement des Moisissures

Application àdes Composites Biosourcés

Translated title of the contribution: Development of a method for assessing resistance to mold growth: Application to Bio-based Composites

Marie Viel, Florence Collet, Yann Lecieux, Marc L.M. François, Valentin Colson, Christophe Lanos, Atif Hussain, Mike Lawrence

Research output: Contribution to journalArticle

Abstract

The production of insulating materials for buildings obtained from the valorization of agro-resources is a promising way both in terms of ecology and hygrothermal performances of these composites. However, the lack of information on their resistance to mold development limits their use. The mold development is indeed likely to cause health problems and to induce damage. There is therefore a need to classify the materials according to their resistance to mold growth and disintegration in order to use them appropriately. The purpose of this paper is to propose a test method that qualifies bio-based composites with respect to their performance. An accelerated aging test was carried out on 5 composites made with two different agro-resources (hemp and rape) with different binders. It consists in exposing the specimens to a temperature of 30 °C and a relative humidity of 90 %RH for three months. The evolution of two indicators is measured over time: the sample mass and the percentage of its external surface contaminated by fungi. At the end of the test, a microscopic view makes it possible to identify the species of the molds which have contaminated the composite.

Original languageFrench
Pages (from-to)261-274
Number of pages14
JournalRevue des Composites et des Materiaux Avances
Volume29
Issue number4
DOIs
Publication statusPublished - 31 Aug 2019

Keywords

  • Construction materials
  • Decay resistance
  • DIC (digital image correlation)
  • Hemp shiv
  • Mold growth
  • Rape straw

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Développement d'une Méthode d'Évaluation de la Résistance au Développement des Moisissures : Application àdes Composites Biosourcés. / Viel, Marie; Collet, Florence; Lecieux, Yann; François, Marc L.M.; Colson, Valentin; Lanos, Christophe; Hussain, Atif; Lawrence, Mike.

In: Revue des Composites et des Materiaux Avances, Vol. 29, No. 4, 31.08.2019, p. 261-274.

Research output: Contribution to journalArticle

Viel, Marie ; Collet, Florence ; Lecieux, Yann ; François, Marc L.M. ; Colson, Valentin ; Lanos, Christophe ; Hussain, Atif ; Lawrence, Mike. / Développement d'une Méthode d'Évaluation de la Résistance au Développement des Moisissures : Application àdes Composites Biosourcés. In: Revue des Composites et des Materiaux Avances. 2019 ; Vol. 29, No. 4. pp. 261-274.
@article{373e6f30d19f43638bf89f9cd4aff721,
title = "D{\'e}veloppement d'une M{\'e}thode d'{\'E}valuation de la R{\'e}sistance au D{\'e}veloppement des Moisissures: Application {\`a}des Composites Biosourc{\'e}s",
abstract = "The production of insulating materials for buildings obtained from the valorization of agro-resources is a promising way both in terms of ecology and hygrothermal performances of these composites. However, the lack of information on their resistance to mold development limits their use. The mold development is indeed likely to cause health problems and to induce damage. There is therefore a need to classify the materials according to their resistance to mold growth and disintegration in order to use them appropriately. The purpose of this paper is to propose a test method that qualifies bio-based composites with respect to their performance. An accelerated aging test was carried out on 5 composites made with two different agro-resources (hemp and rape) with different binders. It consists in exposing the specimens to a temperature of 30 °C and a relative humidity of 90 {\%}RH for three months. The evolution of two indicators is measured over time: the sample mass and the percentage of its external surface contaminated by fungi. At the end of the test, a microscopic view makes it possible to identify the species of the molds which have contaminated the composite.",
keywords = "Construction materials, Decay resistance, DIC (digital image correlation), Hemp shiv, Mold growth, Rape straw",
author = "Marie Viel and Florence Collet and Yann Lecieux and Fran{\cc}ois, {Marc L.M.} and Valentin Colson and Christophe Lanos and Atif Hussain and Mike Lawrence",
year = "2019",
month = "8",
day = "31",
doi = "10.18280/rcma.290410",
language = "French",
volume = "29",
pages = "261--274",
journal = "Revue des Composites et des Materiaux Avances",
issn = "1169-7954",
publisher = "International Information and Engineering Technology Association",
number = "4",

}

TY - JOUR

T1 - Développement d'une Méthode d'Évaluation de la Résistance au Développement des Moisissures

T2 - Application àdes Composites Biosourcés

AU - Viel, Marie

AU - Collet, Florence

AU - Lecieux, Yann

AU - François, Marc L.M.

AU - Colson, Valentin

AU - Lanos, Christophe

AU - Hussain, Atif

AU - Lawrence, Mike

PY - 2019/8/31

Y1 - 2019/8/31

N2 - The production of insulating materials for buildings obtained from the valorization of agro-resources is a promising way both in terms of ecology and hygrothermal performances of these composites. However, the lack of information on their resistance to mold development limits their use. The mold development is indeed likely to cause health problems and to induce damage. There is therefore a need to classify the materials according to their resistance to mold growth and disintegration in order to use them appropriately. The purpose of this paper is to propose a test method that qualifies bio-based composites with respect to their performance. An accelerated aging test was carried out on 5 composites made with two different agro-resources (hemp and rape) with different binders. It consists in exposing the specimens to a temperature of 30 °C and a relative humidity of 90 %RH for three months. The evolution of two indicators is measured over time: the sample mass and the percentage of its external surface contaminated by fungi. At the end of the test, a microscopic view makes it possible to identify the species of the molds which have contaminated the composite.

AB - The production of insulating materials for buildings obtained from the valorization of agro-resources is a promising way both in terms of ecology and hygrothermal performances of these composites. However, the lack of information on their resistance to mold development limits their use. The mold development is indeed likely to cause health problems and to induce damage. There is therefore a need to classify the materials according to their resistance to mold growth and disintegration in order to use them appropriately. The purpose of this paper is to propose a test method that qualifies bio-based composites with respect to their performance. An accelerated aging test was carried out on 5 composites made with two different agro-resources (hemp and rape) with different binders. It consists in exposing the specimens to a temperature of 30 °C and a relative humidity of 90 %RH for three months. The evolution of two indicators is measured over time: the sample mass and the percentage of its external surface contaminated by fungi. At the end of the test, a microscopic view makes it possible to identify the species of the molds which have contaminated the composite.

KW - Construction materials

KW - Decay resistance

KW - DIC (digital image correlation)

KW - Hemp shiv

KW - Mold growth

KW - Rape straw

UR - http://www.scopus.com/inward/record.url?scp=85075181781&partnerID=8YFLogxK

U2 - 10.18280/rcma.290410

DO - 10.18280/rcma.290410

M3 - Article

VL - 29

SP - 261

EP - 274

JO - Revue des Composites et des Materiaux Avances

JF - Revue des Composites et des Materiaux Avances

SN - 1169-7954

IS - 4

ER -