Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system

Pedram Asef

doi:10.1109/ICRERA.2014.7016437

Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system

Pedram Asef

Department of Electronic & Electrical Engineering

Huazhong University of Science and Technology

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

3 Citations (SciVal)

Abstract

The objective of this paper is to provide a Design Of Low-Speed Permanent Magnet Synchronous Wind Generator (LSPMWG) by Conventional Inner-Rotor Radial-flux (CIRRF) topology to small direct-drive wind energy conversion system (SDWECS). Finite element analysis (FEM) was carried out to obtain magnetic flux density, Air-gap flux distribution versus Angles, Eddy-Current Loss, Hysteresis Loss, Anomalous Loss, Torque, and Electrical Energy Efficiency (EEE). Comparison of LSPMWG based on the latest Soft Magnet Powder Composite (SMC) with advantages and disadvantages are highlighted in comparison a conventional Steel laminated in this research paper. Besides, to ensure SMC-5P X-SOMALOY 700HR features of magnetic properties electrical the measurements must be done on standard geometry. the results present the best-suited materials to enhancing EEE of LSPMWG.

Original language	English
Title of host publication	3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014
Publisher	IEEE
Pages	41-47
Number of pages	7
ISBN (Electronic)	9781479937950
DOIs	https://doi.org/10.1109/ICRERA.2014.7016437
Publication status	Published - 20 Jan 2014
Event	3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014 - Milwaukee, USA United States Duration: 19 Oct 2014 → 22 Oct 2014

Publication series

Name	3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014

Conference

Conference	3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014
Country/Territory	USA United States
City	Milwaukee
Period	19/10/14 → 22/10/14

Bibliographical note

Publisher Copyright:
© 2014 IEEE.

Keywords

CIRRF
Electrical Energy Efficiency (EEE)
Low-Speed Permanent Magnet Synchronous Wind Generator (LSPMWG)
small direct-drive wind energy conversion system (SDWECS)
SMC-5PX-SOMALOY700HR
wind energy

ASJC Scopus subject areas

Renewable Energy, Sustainability and the Environment

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/ICRERA.2014.7016437

Cite this

Asef, P. (2014). Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system. In 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014 (pp. 41-47). Article 7016437 (3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014). IEEE. https://doi.org/10.1109/ICRERA.2014.7016437

Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system. / Asef, Pedram.
3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014. IEEE, 2014. p. 41-47 7016437 (3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014).

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Asef, P 2014, Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system. in 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014., 7016437, 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014, IEEE, pp. 41-47, 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014, Milwaukee, USA United States, 19/10/14. https://doi.org/10.1109/ICRERA.2014.7016437

Asef P. Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system. In 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014. IEEE. 2014. p. 41-47. 7016437. (3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014). doi: 10.1109/ICRERA.2014.7016437

@inproceedings{2eae905223b049939f4943b300478fa8,

title = "Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system",

abstract = "The objective of this paper is to provide a Design Of Low-Speed Permanent Magnet Synchronous Wind Generator (LSPMWG) by Conventional Inner-Rotor Radial-flux (CIRRF) topology to small direct-drive wind energy conversion system (SDWECS). Finite element analysis (FEM) was carried out to obtain magnetic flux density, Air-gap flux distribution versus Angles, Eddy-Current Loss, Hysteresis Loss, Anomalous Loss, Torque, and Electrical Energy Efficiency (EEE). Comparison of LSPMWG based on the latest Soft Magnet Powder Composite (SMC) with advantages and disadvantages are highlighted in comparison a conventional Steel laminated in this research paper. Besides, to ensure SMC-5P X-SOMALOY 700HR features of magnetic properties electrical the measurements must be done on standard geometry. the results present the best-suited materials to enhancing EEE of LSPMWG.",

keywords = "CIRRF, Electrical Energy Efficiency (EEE), Low-Speed Permanent Magnet Synchronous Wind Generator (LSPMWG), small direct-drive wind energy conversion system (SDWECS), SMC-5PX-SOMALOY700HR, wind energy",

author = "Pedram Asef",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014 ; Conference date: 19-10-2014 Through 22-10-2014",

year = "2014",

month = jan,

day = "20",

doi = "10.1109/ICRERA.2014.7016437",

language = "English",

series = "3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014",

publisher = "IEEE",

pages = "41--47",

booktitle = "3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014",

address = "USA United States",

}

TY - GEN

T1 - Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system

AU - Asef, Pedram

PY - 2014/1/20

Y1 - 2014/1/20

N2 - The objective of this paper is to provide a Design Of Low-Speed Permanent Magnet Synchronous Wind Generator (LSPMWG) by Conventional Inner-Rotor Radial-flux (CIRRF) topology to small direct-drive wind energy conversion system (SDWECS). Finite element analysis (FEM) was carried out to obtain magnetic flux density, Air-gap flux distribution versus Angles, Eddy-Current Loss, Hysteresis Loss, Anomalous Loss, Torque, and Electrical Energy Efficiency (EEE). Comparison of LSPMWG based on the latest Soft Magnet Powder Composite (SMC) with advantages and disadvantages are highlighted in comparison a conventional Steel laminated in this research paper. Besides, to ensure SMC-5P X-SOMALOY 700HR features of magnetic properties electrical the measurements must be done on standard geometry. the results present the best-suited materials to enhancing EEE of LSPMWG.

AB - The objective of this paper is to provide a Design Of Low-Speed Permanent Magnet Synchronous Wind Generator (LSPMWG) by Conventional Inner-Rotor Radial-flux (CIRRF) topology to small direct-drive wind energy conversion system (SDWECS). Finite element analysis (FEM) was carried out to obtain magnetic flux density, Air-gap flux distribution versus Angles, Eddy-Current Loss, Hysteresis Loss, Anomalous Loss, Torque, and Electrical Energy Efficiency (EEE). Comparison of LSPMWG based on the latest Soft Magnet Powder Composite (SMC) with advantages and disadvantages are highlighted in comparison a conventional Steel laminated in this research paper. Besides, to ensure SMC-5P X-SOMALOY 700HR features of magnetic properties electrical the measurements must be done on standard geometry. the results present the best-suited materials to enhancing EEE of LSPMWG.

KW - CIRRF

KW - Electrical Energy Efficiency (EEE)

KW - Low-Speed Permanent Magnet Synchronous Wind Generator (LSPMWG)

KW - small direct-drive wind energy conversion system (SDWECS)

KW - SMC-5PX-SOMALOY700HR

KW - wind energy

UR - http://www.scopus.com/inward/record.url?scp=84946693265&partnerID=8YFLogxK

U2 - 10.1109/ICRERA.2014.7016437

DO - 10.1109/ICRERA.2014.7016437

M3 - Chapter in a published conference proceeding

AN - SCOPUS:84946693265

T3 - 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014

SP - 41

EP - 47

BT - 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014

PB - IEEE

T2 - 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014

Y2 - 19 October 2014 through 22 October 2014

ER -

Design, characteristic analysis of PM wind generator based on SMC material for small direct-drive wind energy conversion system

Abstract

Publication series

Conference

Bibliographical note

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this