Skip to main navigation Skip to search Skip to main content

AN INVESTIGATION OF THERMOPLASTIC TAPE-TO-TAPE BONDING USING XENON FLASH LAMP HEATING

Research output: Contribution to conference › Paper › peer-review

Abstract

This research was undertaken to investigate factors affecting the tape-to-tape bond strength of thermoplastic composite tapes in the Automated Fibre Placement (AFP) process using a xenon flash lamp as the heat source. Two variants of flash lamp were studied with different spectral outputs. The effect of exposure to the broadband output of the flash lamp on the polymer chemistry of representative thermoplastic tapes was investigated by analysing exposed tape samples. Particular focus was given to the potential for the UV wavelengths within the spectrum to photodegrade the long polymer chains into lower molecular weights, reducing their ability to form strong tape-to-tape bonds. Three spectroscopy techniques were used: Fourier-Transform Infrared Spectroscopy (FTIR); Raman Spectroscopy; and X-Ray Photoelectron Spectroscopy (XPS). The study included carbon fibre tapes with polyaryl ether ketone (CF-PAEK) and polyamide 6 (CF-PA6) matrices. From these spectroscopy studies, no clear evidence was found that exposure to flash lamp energy causes photodegradation of the polymers. The study then investigated how the spectral output of the flash lamp affected the peel strength of the tapes through peel testing of bonded tape pairs and imaging of the peeled surfaces. Tapes were bonded (welded) by a novel process, using the flash lamp's ability to heat and apply compaction force onto the tapes simultaneously. The peeled surfaces revealed the failure mechanism of the polymer at the interface via Scanning Electron Microscopy (SEM), which in all cases showed ductile failure of discrete polymer regions and not overall brittle failure. The difference between low and high peel strengths was observed to be related to the number of discrete areas of polymer that undergo plastic deformation during the peel.

Original languageEnglish
Publication statusPublished - 8 Aug 2025
Event24th International Conference on Composite Materials, ICCM 2025 - Baltimore, USA United States
Duration: 4 Aug 2025 → 8 Aug 2025

Conference

Conference24th International Conference on Composite Materials, ICCM 2025
Country/TerritoryUSA United States
CityBaltimore
Period4/08/25 → 8/08/25

Keywords

  • Peel strength
  • Tape bonding
  • Thermoplastics
  • Welding
  • Xenon flash lamp

ASJC Scopus subject areas

  • General Engineering
  • Ceramics and Composites

Fingerprint

Dive into the research topics of 'AN INVESTIGATION OF THERMOPLASTIC TAPE-TO-TAPE BONDING USING XENON FLASH LAMP HEATING'. Together they form a unique fingerprint.

Cite this