An assembly gap control method based on posture alignment of wing panels in aircraft assembly

Wang Qing, Yadong Dou, Jiangxiong Li, Yinglin Ke, Patrick Keogh, Paul Maropoulos

Research output: Contribution to journalArticlepeer-review

31 Citations (SciVal)
250 Downloads (Pure)

Abstract

Purpose
The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process.

Design/methodology/approach
Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization.

Findings
Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance.

Practical implications
This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components.

Originality/value
This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.
Original languageEnglish
Pages (from-to)422-433
Number of pages12
JournalAssembly Automation
Volume37
Issue number4
Early online date4 Sept 2017
DOIs
Publication statusPublished - 4 Sept 2017

Keywords

  • Mating surfaces
  • Assembly gaps
  • Gap tolerance
  • Posture evaluation
  • Wing panel
  • Assembly automation

Fingerprint

Dive into the research topics of 'An assembly gap control method based on posture alignment of wing panels in aircraft assembly'. Together they form a unique fingerprint.

Cite this