AC Loss Calculation on a 6.5 MVA/25 kV HTS Traction Transformer with Hybrid Winding Structure

Wenjuan Song, Zhenan Jiang, Mike Staines, Stuart Wimbush, Rodney Badcock, Jin Fang

Research output: Contribution to journalArticlepeer-review

13 Citations (SciVal)
42 Downloads (Pure)


HTS wire cost is a critical factor for successful commercialization of HTS traction transformer technology. Wire cost might be min-imized without significantly increasing AC loss by introducing a hybrid winding structure: the end-part of the windings is wound with high-cost high-Ic wires; the central-part of the windings is wound with low-cost low-Ic wires. We report AC loss simulation results on HTS windings with both HV and LV windings wound with REBCO wires. The 2D axisymmetric FEM simulation was carried out using H-formulation. The HV windings are wound with 4 mm-wide wires and LV windings are wound with 8/5 (eight 5 mm wide strands) Roebel cables. Both HV and LV windings have a hybrid structure in order to reduce the wire cost. Flux diverters are placed at the end of the windings to reduce AC loss. Significant HTS wire cost reduction could be achieved with-out compromising AC loss by using hybrid windings. This may help commercialize HTS traction transformer technology.
Original languageEnglish
Article number9006855
JournalIEEE Transactions on Applied Superconductivity
Issue number4
Early online date21 Feb 2020
Publication statusPublished - Jun 2020


  • AC loss
  • hybrid winding structure
  • traction transformer
  • wire cost

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering


Dive into the research topics of 'AC Loss Calculation on a 6.5 MVA/25 kV HTS Traction Transformer with Hybrid Winding Structure'. Together they form a unique fingerprint.

Cite this