Search concepts
|
Selected filters
|
- 18,200 - 18,250 out of 76,674 results
Search results
-
Design and testing of a fiber-metal-laminate bird-strike-resistant leading edge
Guida, M., Marulo, F., Polito, T., Meo, M. & Riccio, M., Nov 2009, In: AIAA Journal of Aircraft. 46, 6, p. 2121-2129 9 p.Research output: Contribution to journal › Article › peer-review
17 Citations (SciVal) -
Design and Testing of a Rig to Investigate Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors
Luberti, D., Patinios, M., Jackson, R., Tang, H., Pountney, O., Scobie, J., Sangan, C., Owen, M. & Lock, G., Apr 2021, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 143, 041030Research output: Contribution to journal › Article › peer-review
Open AccessFile53 Downloads (Pure) -
Design and Testing of a Rig to Investigate Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors
Luberti, D., Patinios, M., Jackson, R., Tang, H., Pountney, O., Scobie, J., Sangan, C., Owen, M. & Lock, G., 22 Jun 2020, Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition . GT2020-14422. (Proceedings of the ASME Turbo Expo 2020).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
4 Citations (SciVal) -
Design and test of a new droop control algorithm for a SMES/battery hybrid energy storage system
Li, J., Yang, Q., Robinson, F., Liang, F., Zhang, M. & Yuan, W., 1 Jan 2017, In: Energy. 118, p. 1110-1122 13 p.Research output: Contribution to journal › Article › peer-review
71 Citations (SciVal) -
Design and test of a new two-stage control scheme for SMES-battery hybrid energy storage systems for microgrid applications
Sun, Q., Xing, D., Alafnan, H., Pei, X., Zhang, M. & Yuan, W., 1 Nov 2019, In: Applied Energy. 253, 113529.Research output: Contribution to journal › Article › peer-review
Open AccessFile18 Citations (SciVal)20 Downloads (Pure) -
Design and test of a superconducting magnetic energy storage (SMES) coil
Yuan, W., Xian, W., Ainslie, M., Hong, Z., Yan, Y., Pei, R., Jiang, Y. & Coombs, T. A., Jun 2010, In: IEEE Transactions on Applied Superconductivity. 20, 3, p. 1379-1382 4 p.Research output: Contribution to journal › Article › peer-review
12 Citations (SciVal) -
Design and validation of a LED-based high intensity photocatalytic reactor for quantifying activity measurements
Casado, C., Timmers, R., Sergejevs, A., Clarke, C. T., Allsopp, D. W. E., Bowen, C. R., van Grieken, R. & Marugán, J., 1 Nov 2017, In: Chemical Engineering Journal. 327, p. 1043-1055 13 p.Research output: Contribution to journal › Article › peer-review
Open Access52 Citations (SciVal) -
Design and validation of probes and sensors for the characterization of magneto-ionic radio wave propagation on Near Vertical Incidence Skywave paths
Witvliet, B. A., Alsina-Pagès, R. M., Van Maanen, E. & Laanstra, G. J., 9 Jun 2019, In: Sensors (Switzerland). 19, 11, p. 1-16 16 p., 2616.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (SciVal) -
Design application in industry and education
Culley, S., Duffy, A., McMahon, C. A. & Wallace, K. W., 2001.Research output: Contribution to conference › Paper › peer-review
-
Design Applications in Industry and Education
Culley, S., Duffy, A., McMahon, C. & Wallace, K., 2001, Bury St Edmunds: Professional Engineering Publishing. 483 p.Research output: Book/Report › Book
-
Design aspects of the valve regulated lead/acid battery positive electrode
Ball, R. J. & Stevens, R., 2003, In: Journal of Power Sources. 113, 2, p. 228-232 5 p.Research output: Contribution to journal › Article › peer-review
-
Design aspects of the VRLA battery positive electrode
Ball, R. J. & Stevens, R., 2002.Research output: Contribution to conference › Paper › peer-review
-
Design automation and test for FPGAs
Wilson, P., 30 Sep 2008, Circuit Design: Know it All. Ashby, D., Baker, B., Ball, S., Carter, B., Crowe, J., Grout, I., Hayes-Gill, B., Hickman, I., Kester, W., Kugelstadt, T., Mancini, R., Palmer, R., Pease, R., Tooley, M., Williams, T., Wilson, P. & Zeidman, B. (eds.). Oxford, U. K.: Newnes, p. 967-980Research output: Chapter or section in a book/report/conference proceeding › Other chapter contribution
-
Design Basis and Safety Criteria (for tensile structures)
Barnes, M. & Forster, B., 2004, European Design Guide for Tensile Surface Structures. Forster, B. & Mollaert, M. (eds.). Brussels: Tensinet, p. 177-189 13 p.Research output: Chapter or section in a book/report/conference proceeding › Chapter or section
-
Design by algorithm
Williams, C., 2004, Digital tectonics. Leach, N., Turnbull, D. & Williams, C. (eds.). Chichester, UK.: Wiley, p. 78-85 8 p.Research output: Chapter or section in a book/report/conference proceeding › Chapter or section
-
Design catalogues for mechanism selection
Singh, B., Matthews, J., Mullineux, G. & Medland, A. J., 2008, p. 649-656. 8 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (SciVal) -
Design Champions: Housing [conference chair & organiser]
Charrington, H. & Devereux, M., 2008, (Unpublished).Research output: Contribution to conference › Other
-
Design Champions: Street and Block [conference chair & organiser]
Charrington, H. & Devereux, M., 2009, (Unpublished).Research output: Contribution to conference › Other
-
Design change impact analysis during early design specification
McKay, K. R., Bramall, D. G., Rogers, B. C., Chapman, P., Cheung, W. M. & Maropoulos, P. G., 2003, In: International Journal of Computer Integrated Manufacturing. 16 Oct-Dec, 7-8, p. 598-604 7 p.Research output: Contribution to journal › Article › peer-review
2 Citations (SciVal) -
Design Computing and Cognition (DCC'10)
Rudolph, S., Heisserman, J. & Culley, S., 2012, In: Artificial Intelligence for Engineering Design, Analysis and Manufacturing. 26, 2, p. 105-106 2 p.Research output: Contribution to journal › Article
-
Design consideration and potential of the Milner CVT
Hunt, A., Akehurst, S. & Schaaf, S., 2006, p. 51-66. 16 p.Research output: Contribution to conference › Paper
-
Design consideration of a circular type magnetic flux pump device
Wang, W., Zhang, M., Hsu, C. & Coombs, T., 1 Jun 2012, In: IEEE Transactions on Applied Superconductivity. 22, 3, p. 5201304-5201304Research output: Contribution to journal › Article › peer-review
10 Citations (SciVal) -
Design considerations for the volutes of centrifugal fans and compressors
Pan, D., Whitfield, A. & Wilson, M., 1999, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 213, 4, p. 401-410 10 p.Research output: Contribution to journal › Article › peer-review
6 Citations (SciVal) -
Design Considerations for Voltage Sensorless Control of a PFC Single-Phase Rectifier Without Electrolytic Capacitors
Qi, W., Li, S., Tan, S-C. & Hui, S. Y. R., 1 Mar 2020, In: IEEE Transactions on Industrial Electronics. 67, 3, p. 1878-1889 12 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile11 Citations (SciVal)58 Downloads (Pure) -
Design considerations in compliant seating for children with whole body extensor spasms
Adlam, T., Orpwood, R. & Wisbeach, A., 2008.Research output: Contribution to conference › Paper
-
Design Considerations of Novel Modular-Spoke-Type Permanent Magnet Machines
Zhang, H., Hua, W., Wu, Z. & Zhu, X., 1 Sep 2018, In: IEEE Transactions on Industry Applications. 54, 5, p. 4236-4245 10 p., 8359329.Research output: Contribution to journal › Article › peer-review
9 Citations (SciVal) -
Design considerations towards simultaneously radiolabeled and fluorescent imaging probes incorporating metallic species
Pascu, S., Waghorn, P. A., Conry, T., Lin, B., James, C. & Zayed, J. M., 2009, Advances in Inorganic Chemistry, Vol 61: Metal Ion Controlled Reactivity. San Diego: Elsevier Academic Press Inc, Vol. 61. p. 131-178 48 p. (Advances in Inorganic Chemistry).Research output: Chapter or section in a book/report/conference proceeding › Chapter or section
2 Citations (SciVal) -
Design data for low heat and very low heat special cements. Final Report to Industry, CTU/4006
Dhir, R. K., Paine, K. A. & Zheng, L., 2006, Unkown Publisher. 149 p. (CTU/4006)Research output: Book/Report › Other report
-
Design data for use where low heat cements are used. Final Report to Department of Trade and Industry, CTU/2704
Dhir, R. K., Paine, K. A. & Zheng, L., 2004, Unkown Publisher. (CTU/2704)Research output: Book/Report › Other report
-
Designed beta-hairpins inhibit LDH5 oligomerization and enzymatic activity
Nadal-Bufi, F., Mason, J., Chan, L., Craik, D., Kaass, Q. & Henriques, S., 8 Apr 2021, In: Journal of Medicinal Chemistry. 64, 7, p. 3767–3779Research output: Contribution to journal › Article › peer-review
Open AccessFile4 Downloads (Pure) -
Designed Liquid Crystalline Polypeptide Fibres
Leese, H., 2 Dec 2019.Research output: Contribution to conference › Poster › peer-review
-
Design Education for the World of Near Tomorrow: Empowering Students to Learn How to Learn
Schaefer, D., Panchal, J. H., Haroon, S. & Mistree, F., 2011.Research output: Contribution to conference › Paper › peer-review
Open AccessFile66 Downloads (Pure) -
Designer behaviour and activity: an industrial observation Method
Cash, P., Hicks, B., Culley, S. & Salustri, F., 15 Aug 2011.Research output: Contribution to conference › Paper › peer-review
3 Citations (SciVal) -
Designer behaviour and activity: An industrial observation method
Cash, P., Hicks, B. & Culley, S., Aug 2011, p. 151-162. 12 p.Research output: Contribution to conference › Paper › peer-review
3 Citations (SciVal) -
Designer small molecules to target calcium signalling
Swarbrick, J., Riley, A., Mills, S. & Potter, B., 2015.Research output: Contribution to conference › Paper › peer-review
File7 Citations (SciVal)215 Downloads (Pure) -
Designer small molecules to target calcium signalling
Swarbrick, J. M., Riley, A. M., Mills, S. J. & Potter, B. V. L., 1 Jun 2015, In: Biochemical Society Transactions. 43, 3, p. 417-425 9 p.Research output: Contribution to journal › Article › peer-review
7 Citations (SciVal) -
Design evolution of a Novel tilting three-wheeled motorcycle for city enviroments
Darling, J., Harrison, A. M. & Shalders, B. M., Nov 2000, p. 129-134. 6 p.Research output: Contribution to conference › Paper
-
Design exploration using a shape grammar with a genetic algorithm
Chouchoulas, O. & Day, A., 2007, In: Open House International. 32, 2, p. 26-35 10 p.Research output: Contribution to journal › Article
1 Citation (SciVal) -
Design Factors and Functionality Matching in Sustainability Products: A study of eco-showerheads
Adeyeye, K., She, K. & Baïri, A., 20 Jan 2017, In: Journal of Cleaner Production. 142, Part 4, p. 4214-4229 16 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile9 Citations (SciVal)253 Downloads (Pure) -
Design fault: a fictional exploration of the interface between the art and science of life. II.
Rayner, A. D. M., 2000, In: Transfigural Mathematics. 6, 1Research output: Contribution to journal › Article
-
Design fault: a fictional exploration of the interface between the art and science of life. III
Rayner, A. D. M., 2000, In: Transfigural Mathematics. 6, p. 63-77 15 p.Research output: Contribution to journal › Article
-
Design for assembly in the caravan industry - A case study
Daniel, J. A., Wills, S. P., Darling, J., Mileham, A. R. & Owen, G. W., Oct 2000, p. 107-112. 6 p.Research output: Contribution to conference › Paper
-
Design for changeover: enabling the design of highly flexible, highly responsive manufacturing processes
Reik, M. P., McIntosh, R. I., Owen, G. W., Mileham, A. R. & Culley, S. J., 2005, p. 373-384. 12 p.Research output: Contribution to conference › Paper
-
Design for Changeover (DFC)
Reik, M. P., McIntosh, R. I., Mileham, A. R., Owen, G. W. & Culley, S. J., 2006, Mass Customisation - Challenges and Solutions. Blecker, T. & Friedrich, G. (eds.). New York: Springer, p. 111-136 26 p. (International series in operations research & management science).Research output: Chapter or section in a book/report/conference proceeding › Chapter or section
5 Citations (SciVal) -
Design for Changeover (DFC); Integrated product and process design for mass-customized, flexible manufacture
Reik, M. P., Mileham, A. R., Culley, S. J., McIntosh, R. I. & Owen, G. W., 2006, p. 225-244. 20 p.Research output: Contribution to conference › Paper
-
Design for Changeover (DFC): enabling flexible and highly responsive manufacturing
Owen, G. W., Matthews, J., McIntosh, R. I. & Culley, S. J., 30 Nov 2011, Mass Customization –Engineering and Managing Global Operations. Fogliatto, F. & da Silveira, G. (eds.). Springer, Vol. III. p. 247-273 27 p. (Springer Series in Advanced Manufacturing).Research output: Chapter or section in a book/report/conference proceeding › Chapter or section
-
Design for changeover (DFC): Enabling the design of highly flexible, highly responsive manufacturing processes
Reik, M. P., McIntosh, R. I., Owen, G. W., Mileham, A. R. & Culley, S. J., 2006, Mass Customization: Challenges and Solutions - International Mass Customization Meeting. Blecker, T. & Friedrich, G. (eds.). Springer, Vol. 87. p. 111-136 26 p. (International Series in Operations Research & Management Science).Research output: Chapter or section in a book/report/conference proceeding › Chapter or section
5 Citations (SciVal) -
Design for changeover and sustainability
Culley, S. J., Mileham, A. R., Owen, G. W. & McIntosh, R. I., 2004, p. 185-218. 34 p.Research output: Contribution to conference › Paper
-
Design for changeover - a pre-requisite for lean manufacture
Mileham, A. R., Culley, S. J., Owen, G. W. & McIntosh, R. I., Sep 1995, p. 201-208. 8 p.Research output: Contribution to conference › Paper
-
Design for change over - products, machines, and tooling systems
Culley, S. J., Mileham, A. R., Own, G. W., MacIntosh, R. I., Gest, G. B., Shirvani, B. & Shirvani, B. (ed.), Jun 1995, p. 77-85. 9 p.Research output: Contribution to conference › Paper