Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
Paper

Development of a high performance sports car for operation on a high alcohol-blend fuel

Turner, J. W. G., Pearson, R. J., Holland, B. & Peck, A., 2007.

Research output: Contribution to conferencePaper

Development of a knowledge based system for the diagnosis of faults in hydraulic circuits

Hogan, P. A., Burrows, C. R. & Edge, K. A., 1990.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Development of an Encapsulation/Stabilisation Technique for Bacteriophage Therapy in Burn Site Infections

Perez Esteban, P., 2012.

Research output: Contribution to conferencePaper

Development of a new laser-surgery tool using high-brightness laser arrays and specially designed beam-shaping optics

Causa, F., Bonora, S., Masanotti, D. & Villoresi, P., 2006.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Development of a new type tangential fired burner with bias combustion

Sun, S., Wu, S., Wang, Z., Zhu, T., Li, Z., Xia, C. Y., Sun, R., Chen, L., Yang, M., Sun, E. & Qin, Y., 1996.

Research output: Contribution to conferencePaper

Development of an intelligent cavity creation (ICC) algorithm for evolutionary structural optimisation

Kim, H. A., Querin, O. M., Steven, G. P. & Xie, Y. M., 1998, p. 241-250. 10 p.

Research output: Contribution to conferencePaper

Development of an in vitro-in vivo correlation (IVIVC) for a BCS Class II compound with pH-dependent solubility

Fotaki, N., Obwoge, E., Tang, K. & Chokshi, H., 2007.

Research output: Contribution to conferencePaper

Development of a Novel MW+MVAr-Miles Charging Methodology

Li, F., Padhy, N. P., Wang, J. & Kuri, B., 2005, p. 1-5. 5 p.

Research output: Contribution to conferencePaper

Development of a physiotherapy robot

Richardson, R., Austin, M. E. & Plummer, A. R., 1999, p. 116-120. 5 p.

Research output: Contribution to conferencePaper

Development of a reclosing scheme for reduction of turbine generator shaft torsional torques

Oh, Y-S., Gwon, G-H., Kim, C-H. & Aggarwal, R. K., 2014, p. 12.51. 6 p.

Research output: Contribution to conferencePaper

Development of a reconfigurable modular GPS beamformer for design and test

Lloyd, E. M. & Watson, R. J., 1 Jan 2017.

Research output: Contribution to conferencePaper

Development of a relative motion facility for simulations of autonomous air to air refuelling

Du Bois, J., Thomas, P. & Richardson, T., Mar 2012.

Research output: Contribution to conferencePaper

6 Citations (Scopus)

Development of a robust Remanufacturing definition

Ijomah, W., McMahon, C. A., Hammond, G. P. & Newman, S. T., Jun 2007.

Research output: Contribution to conferencePaper

Development of a single chamber microbial fuel cell as biosensor of the organic content in wastewaters

Di Lorenzo, M., Curtis, T. P. & Scott, K., Jul 2008.

Research output: Contribution to conferencePaper

Development of a single chamber microbial fuel cell as BOD sensor

Di Lorenzo, M., Curtis, T. P. & Scott, K., May 2008.

Research output: Contribution to conferencePaper

Development of a Steer Tilt Controller for a Three Wheeled Tilting Vehicle

Poelgeest, A., Edge, K. A. & Darling, J., Nov 2007.

Research output: Contribution to conferencePaper

Development of a synthetic collateral ligament model for use in an in vitro kinematic knee simulator

Fitzgerald, L. G., Miles, A. W. & Titchener, A., 14 Oct 2013.

Research output: Contribution to conferencePaper

Development of Design for Remanufacturing Guidelines to support Sustainable Manufacturing

Ijomah, W., McMahon, C. A. & Newman, S. T., Jun 2006.

Research output: Contribution to conferencePaper

Development of Electrically Active Textiles with Knitting Technology

Dias, T., Hurly, W., Chughtai, M. & Soleimani, M., 2006.

Research output: Contribution to conferencePaper

Development of entangled photon pair sources based on birefringent structures

McMillan, A., Clark, A., Corrielli, G., Bell, B., McCutcheon, W., Wu, T., Wadsworth, W., Osellame, R. & Rarity, J., 2014.

Research output: Contribution to conferencePaper

Development of fixed grid evolutionary structural optimisation

Kim, H. A., Querin, O. M., Steven, G. P. & Xie, Y. M., 2000.

Research output: Contribution to conferencePaper

Development of in vitro-in vivo correlations (IVIVCs) for controlled release formulations of BSC Class I compounds

Fotaki, N., Warren, K., Irish, N. & Haden Tebb, A., 8 Jun 2009.

Research output: Contribution to conferencePaper

Development of marine sponge collagen coated lecithin formulations for the treatment of inflammatory bowel disease

Pergament, V., Schatton, W., Guldutuna, S. & Fotaki, N., 2013.

Research output: Contribution to conferencePaper

Development of non-metallic timber connections for contemporary applications

Thomson, A., Harris, R., Ansell, M. & Walker, P., 2010, p. 2995-3002. 8 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Development of prefabricated construction products to increase use of natural materials

Walker, P. J. & Thomson, A., Jun 2013, p. 21-24.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Development of principles for ergonomic arena seating design

Lee, J. R., Mileham, A. R. & Owen, G. W., 2001, p. 75-80. 6 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Development of rational guidelines for traditional joints in oak frame

Shanks, J., Walker, P. & Harris, R., 2008.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Development of Sub-Transmission Network Equivalents and After-Diversity-Demand Values: Case Study of the UK Residential Sector

Hernando Gil, I., Li, F., Collin, A. & Djokic, S. Z., Jun 2016. 6 p.

Research output: Contribution to conferencePaper

Open Access
File
3 Citations (Scopus)
107 Downloads (Pure)

Development of Testing Methods to Test The Integrity of Film Coatings

Blackmore, S. J., Salmon, K., Turner, I. G., Vogwell, J. & Brown, S. R., 2004.

Research output: Contribution to conferencePaper

Development of Testing Techniques To Assess The Integrity of Film Coated Tablets 2

Blackmore, S., Vogwell, J., Turner, I. G. & Brown, S. R., 2005.

Research output: Contribution to conferencePaper

Development of Tests to Measure the Impact and Abrasion Properties of Film-Coated Tablets 1

Blackmore, S., Vogwell, J., Turner, I. G. & Brown, S. R., 2005.

Research output: Contribution to conferencePaper

Development of the new type swirl burner with bias and stage combustion

Wu, S., Li, Z., Sun, R., Sun, S., Ma, C., Wang, Z., Chen, L., Sun, E. & Qin, Y., 1996.

Research output: Contribution to conferencePaper

Development of ultra-thin timber-concrete composite upgrades

Skinner, J., Bregulla, J., Harris, R., Paine, K. & Walker, P., 1 Jan 2014.

Research output: Contribution to conferencePaper

Devleopment of a closed-loop recycling process for short carbon fibre composites: Matrix

Tapper, R. J., Longana, M. L., Yu, H., Hamerton, I. & Potter, K. D., 1 Jan 2017.

Research output: Contribution to conferencePaper

Dialogue and inclusive eductional practice

Skidmore, D., 1999.

Research output: Contribution to conferencePaper

Diamond mining, urbanization and social transformation in Sierra Leone

Maconachie, R., 26 Feb 2011, (Unpublished).

Research output: Contribution to conferencePaper

Did Clinton have a foreign policy for Iraq?

Aslam, M. W., 2 Sep 2005.

Research output: Contribution to conferencePaper

Die design for the cold forging of spur gears

Kwon, H. H., Bramley, A. N., Mileham, A. R., Newnes, L. B. & Owen, G. W., 1999, p. 105-109. 5 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Die Prozesskette des Schaltschrankbaus

Translated title of the contribution: Switch cabinet design as an engineering processHoleczek, A., Schaefer, D. & Roller, D., 2001, p. 37-51.

Research output: Contribution to conferencePaper

Diesel Engine Performance with CO2/O2/N2 Mixtures

Reader, G. T., Zheng, M., Potter, I. J., Gustafson, R. & Hawley, J. G., 1993, p. 194-199. 6 p.

Research output: Contribution to conferencePaper

Diesel Engine Simulation for Non-Air Atmospheres

Hawley, J. G., Ashcroft, S. J., Patrick, M. A., Reader, G. T., Zheng, M. & Potter, I. J., 1996, p. 1938-1943. 6 p.

Research output: Contribution to conferencePaper

Differences in predictors of loneliness and social isolation experienced by rural-dwelling older adults

De Koning, J., Stathi, A., Richards, S. & Parkhurst, G., 2014.

Research output: Contribution to conferencePaper

Differences in Shear Stress, Residence Time and Estimates of Hemolysis Between Different Ventricular Assist Devices

Fraser, K. H., Zhang, T., Griffith, B. P. & Wu, Z. J., 2011, p. 159-160. 2 p.

Research output: Contribution to conferencePaper