Find Research outputs

Search results

• Paper

  Development of a reconfigurable modular GPS beamformer for design and test

  Lloyd, E. M. & Watson, R. J., 1 Jan 2017.

  Research output: Contribution to conference › Paper › peer-review

  • Global positioning system
  • Antenna feeders
  • Antenna arrays
  • Antennas
  • Testing
  1 Citation (Scopus)

• Development of a relative motion facility for simulations of autonomous air to air refuelling

  Du Bois, J., Thomas, P. & Richardson, T., Mar 2012.

  Research output: Contribution to conference › Paper › peer-review

  • Air refueling
  • Air
  • Kinematics
  • Hardware-in-the-loop simulation
  • Position measurement
  6 Citations (Scopus)

• Development of a robust mechanical shear connector between FRP and concrete for FRP stay-in-place participating formwork

  Gai, X., Darby, A., Ibell, T. & Evernden, M., Jul 2009, p. 1-4. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Development of a robust Remanufacturing definition

  Ijomah, W., McMahon, C. A., Hammond, G. P. & Newman, S. T., Jun 2007.

  Research output: Contribution to conference › Paper

• Development of a single chamber microbial fuel cell as biosensor of the organic content in wastewaters

  Di Lorenzo, M., Curtis, T. P. & Scott, K., Jul 2008.

  Research output: Contribution to conference › Paper

• Development of a single chamber microbial fuel cell as BOD sensor

  Di Lorenzo, M., Curtis, T. P. & Scott, K., May 2008.

  Research output: Contribution to conference › Paper

• Development of a Steer Tilt Controller for a Three Wheeled Tilting Vehicle

  Poelgeest, A., Edge, K. A. & Darling, J., Nov 2007.

  Research output: Contribution to conference › Paper

  • Controllers
  • Motorcycles
  • Hydraulic actuators
  • Compliance

• Development of a synthetic collateral ligament model for use in an in vitro kinematic knee simulator

  Fitzgerald, L. G., Miles, A. W. & Titchener, A., 14 Oct 2013.

  Research output: Contribution to conference › Paper › peer-review

• Development of Design for Remanufacturing Guidelines to support Sustainable Manufacturing

  Ijomah, W., McMahon, C. A. & Newman, S. T., Jun 2006.

  Research output: Contribution to conference › Paper

• Development of Electrically Active Textiles with Knitting Technology

  Dias, T., Hurly, W., Chughtai, M. & Soleimani, M., 2006.

  Research output: Contribution to conference › Paper › peer-review

• Development of entangled photon pair sources based on birefringent structures

  McMillan, A., Clark, A., Corrielli, G., Bell, B., McCutcheon, W., Wu, T., Wadsworth, W., Osellame, R. & Rarity, J., 2014.

  Research output: Contribution to conference › Paper

  • waveguide lasers
  • chips
  • optical fibers
  • photons
  • polarization

• Development of fixed grid evolutionary structural optimisation

  Kim, H. A., Querin, O. M., Steven, G. P. & Xie, Y. M., 2000.

  Research output: Contribution to conference › Paper

• Development of in vitro-in vivo correlations (IVIVCs) for controlled release formulations of BSC Class I compounds

  Fotaki, N., Warren, K., Irish, N. & Haden Tebb, A., 8 Jun 2009.

  Research output: Contribution to conference › Paper › peer-review

• Development of light-weight, integrated and multifunctional acoustic metamaterials/metasurfaces to reduce noise from next generation aero-engines: modelling and data

  Bashir, I., Courtney, C. & Carley, M., 2018.

  Research output: Contribution to conference › Paper › peer-review

• Development of load-transfer curves for axially-loaded piles using fibre-optic strain data, finite element analysis and optimisation

  Pelecanos, L. & Soga, K., Jun 2018.

  Research output: Contribution to conference › Paper › peer-review

  • fiber optics
  • pile
  • time domain reflectometry
  • analysis
  • shaft

• Development of marine sponge collagen coated lecithin formulations for the treatment of inflammatory bowel disease

  Pergament, V., Schatton, W., Guldutuna, S. & Fotaki, N., 2013.

  Research output: Contribution to conference › Paper

• Development of non-metallic timber connections for contemporary applications

  Thomson, A., Harris, R., Ansell, M. & Walker, P., 2010, p. 2995-3002. 8 p.

  Research output: Contribution to conference › Paper

  • veneers
  • glass fiber reinforced plastics
  • exploitation
  • quality control
  • corrosion resistance
  3 Citations (Scopus)

• Development of novel, light-weight and multifunctional acoustic metamaterials/metasurfaces for aeronautical applications using 3D Boundary Element Method (BEM3D)

  Bashir, I., Courtney, C. & Carley, M., 6 Sep 2019.

  Research output: Contribution to conference › Paper › peer-review

• Development of prefabricated construction products to increase use of natural materials

  Walker, P. J. & Thomson, A., Jun 2013, p. 21-24.

  Research output: Contribution to conference › Paper › peer-review

  1 Citation (Scopus)

• Development of principles for ergonomic arena seating design

  Lee, J. R., Mileham, A. R. & Owen, G. W., 2001, p. 75-80. 6 p.

  Research output: Contribution to conference › Paper

  3 Citations (Scopus)

• Development of rational guidelines for traditional joints in oak frame

  Shanks, J., Walker, P. & Harris, R., 2008.

  Research output: Contribution to conference › Paper › peer-review

  2 Citations (Scopus)

• Development of Strain Gauges Using Electrically Active Textiles With Knitting Technology For Medical Application

  Soleimani, M., 2008.

  Research output: Contribution to conference › Paper › peer-review

  • Medical applications
  • Strain gages
  • Textiles
  • Smart textiles
  • Structural properties

• Development of Sub-Transmission Network Equivalents and After-Diversity-Demand Values: Case Study of the UK Residential Sector

  Hernando Gil, I., Li, F., Collin, A. & Djokic, S. Z., Jun 2016. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  File

  • bus
  • demand
  • modeling
  • seasonal variation
  • test
  3 Citations (Scopus)

  128 Downloads (Pure)

• Development of Testing Methods to Test The Integrity of Film Coatings

  Blackmore, S. J., Salmon, K., Turner, I. G., Vogwell, J. & Brown, S. R., 2004.

  Research output: Contribution to conference › Paper › peer-review

• Development of Testing Techniques To Assess The Integrity of Film Coated Tablets 2

  Blackmore, S., Vogwell, J., Turner, I. G. & Brown, S. R., 2005.

  Research output: Contribution to conference › Paper

• Development of Tests to Measure the Impact and Abrasion Properties of Film-Coated Tablets 1

  Blackmore, S., Vogwell, J., Turner, I. G. & Brown, S. R., 2005.

  Research output: Contribution to conference › Paper

• Development of the new type swirl burner with bias and stage combustion

  Wu, S., Li, Z., Sun, R., Sun, S., Ma, C., Wang, Z., Chen, L., Sun, E. & Qin, Y., 1996.

  Research output: Contribution to conference › Paper › peer-review

• Development of ultra-thin timber-concrete composite upgrades

  Skinner, J., Bregulla, J., Harris, R., Paine, K. & Walker, P., 1 Jan 2014.

  Research output: Contribution to conference › Paper › peer-review

  • vibration
  • timber
  • testing
  • shear stress
  • peak acceleration

• Developments in bacteria-based self-healing of cementitious composites

  Paine, K., Reeksting, B. & Gebhard, S., 6 Nov 2020, p. 50.

  Research output: Contribution to conference › Paper › peer-review

  File

  • bacterium
  • metabolism
  • trial
  • cold
  • project
  21 Downloads (Pure)

• Devleopment of a closed-loop recycling process for short carbon fibre composites: Matrix

  Tapper, R. J., Longana, M. L., Yu, H., Hamerton, I. & Potter, K. D., 1 Jan 2017.

  Research output: Contribution to conference › Paper › peer-review

  • Carbon Fiber
  • Recycling
  • Carbon fibers
  • Molecular weight distribution
  • Chain length

• Dialogue and inclusive eductional practice

  Skidmore, D., 1999.

  Research output: Contribution to conference › Paper › peer-review

• Diamond mining, urbanization and social transformation in Sierra Leone

  Maconachie, R., 26 Feb 2011, (Unpublished).

  Research output: Contribution to conference › Paper

• DIC affords better validation of predictive specimen specific finite element vertebral models than load displacement curves alone: DIC affords better validation of predictive specimen specific finite element vertebral models than load displacement curves alone

  Agostinho Hernandez, B., Gill, H. & Gheduzzi, S., 7 Jul 2018.

  Research output: Contribution to conference › Paper

  • cement (construction material)
  • bone
  • literature
  • properties of materials
  • speckle

• Dictionary based hole filling with assistance of depth

  Qiao, Y. & Jung, C., 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  2 Citations (Scopus)

  5 Downloads (Pure)

• Did Clinton have a foreign policy for Iraq?

  Aslam, M. W., 2 Sep 2005.

  Research output: Contribution to conference › Paper › peer-review

• Die design for the cold forging of spur gears

  Kwon, H. H., Bramley, A. N., Mileham, A. R., Newnes, L. B. & Owen, G. W., 1999, p. 105-109. 5 p.

  Research output: Contribution to conference › Paper

  3 Citations (Scopus)

• Die Prozesskette des Schaltschrankbaus

  Holeczek, A., Schaefer, D. & Roller, D., 2001, p. 37-51.

  Research output: Contribution to conference › Paper › peer-review

• Diesel Engine Performance with CO2/O2/N2 Mixtures

  Reader, G. T., Zheng, M., Potter, I. J., Gustafson, R. & Hawley, J. G., 1993, p. 194-199. 6 p.

  Research output: Contribution to conference › Paper

• Diesel Engine Simulation for Non-Air Atmospheres

  Hawley, J. G., Ashcroft, S. J., Patrick, M. A., Reader, G. T., Zheng, M. & Potter, I. J., 1996, p. 1938-1943. 6 p.

  Research output: Contribution to conference › Paper

• Differences in predictors of loneliness and social isolation experienced by rural-dwelling older adults

  De Koning, J., Stathi, A., Richards, S. & Parkhurst, G., 2014.

  Research output: Contribution to conference › Paper › peer-review

• Differences in Shear Stress, Residence Time and Estimates of Hemolysis Between Different Ventricular Assist Devices

  Fraser, K. H., Zhang, T., Griffith, B. P. & Wu, Z. J., 2011, p. 159-160. 2 p.

  Research output: Contribution to conference › Paper › peer-review

• Differential multiple support excitation: geotechnical and structural considerations

  Heath, A. C. & Darby, A. P., Jul 2005.

  Research output: Contribution to conference › Paper

  • soil-structure interaction
  • ground conditions
  • method

• Differential transcript profiling identifies candidate genes in the New Zealand model of systemic lupus erythematosus, including the B-cell transcription factor, Bach2.

  Rigby, RJ., Horswell, S., Haywood, M., Shoulders, C., Morley, B. J. & Vyse, TJ., Jan 2005, p. S18-S19.

  Research output: Contribution to conference › Paper › peer-review

• Differentiated effects on rural poverty of an environmental shock: Evidence from a longitudinal survey in rural Sindh, Pakistan

  Lohano, H. & Copestake, J., 2010.

  Research output: Contribution to conference › Paper

  • Rural Poverty
  • Pakistan
  • Income Mobility
  • Household
  • Land Tenure

• Diffraction of creeping waves by conical points

  Smyshlyaev, V. P., Babich, V. M., Dementiev, D. B., Samokish, B. A., Abrahams, I. D. (ed.), Martin, P. A. (ed.) & Simon, M. J. (ed.), 2002, p. 179--187. 9 p.

  Research output: Contribution to conference › Paper

• Digital & fleshy girls' bodies: The discursive construction of normalcy

  Francombe-Webb, J., 2009, (Unpublished).

  Research output: Contribution to conference › Paper › peer-review

• Digital Architectonics: A framework for Façade Optimisation

  Shepherd, P., 27 Nov 2009.

  Research output: Contribution to conference › Paper › peer-review

• Digital Architectonics in Practice

  Shepherd, P., Sep 2009.

  Research output: Contribution to conference › Paper › peer-review

  File
  41 Downloads (Pure)

• Digital enterprise technology in production networks

  Maropoulos, P. G., Bramall, D. G., Chapman, P., Cheung, W. M., McKay, K. R. & Rogers, B. C., 2004.

  Research output: Contribution to conference › Paper

  • Production Networks
  • Synchronization
  • Quality Costs
  • Design for Manufacture
  • Planning

• Digital game based learning for supporting engineering learning in 3 different universities

  Joiner, R., Darling, J., Drew, B. & Huang, Y., 2012.

  Research output: Contribution to conference › Paper

  File

  • academy
  • engineering
  • university
  • learning
  • student
  40 Downloads (Pure)