Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
2017

Non-linear control of a hydraulic piezo-valve using a generalized Prandtl-Ishlinskii hysteresis model

Stefanski, F., Minorowicz, B., Persson, J., Plummer, A. & Bowen, C., 1 Jan 2017, In : Mechanical Systems and Signal Processing. 82, p. 412-431 19 p.

Research output: Contribution to journalArticle

Open Access
File
31 Citations (Scopus)
169 Downloads (Pure)
2016

Is BS EN 459-1:2015 fit for purpose in the context of conservation?

Figueiredo, C., Ball, R. J. & Lawrence, M., 2016, In : The Journal of the Building Limes Forum. 23, p. 46-52

Research output: Contribution to journalArticle

Open Access
File
82 Downloads (Pure)
2020

A Lumped Parameter Thermal Model for Single Sided AFPM Machines with Experimental Validation

Burke, R., Giedymin, A., Wu, Z., Chuan, H., Bourne, N. & Hawley, G., 28 May 2020, In : IEEE Transactions on Transportation Electrification. 6, 3, p. 1065-1083 19 p.

Research output: Contribution to journalArticle

Open Access
File
13 Downloads (Pure)
2011

Remote sensing of water waves: wave flume experiments on regular and irregular waves

Harry, M., Zhang, H., Lemckert, C., Colleter, G. & Blenkinsopp, C., 28 Sep 2011, 20th Australasian Coastal and Ocean Engineering Conference 2011 and the 13th Australasian Port and Harbour Conference 2011 (COASTS AND PORTS 2011) . Curran Associates, p. 138-143 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
51 Downloads (Pure)
2016

Analysis and Implementation of an Ultra-Wide Tuning Range CMOS Ring-VCO With Inductor Peaking

Wilson, P., Li, K., Meng, F. & Reed, G., 5 Dec 2016, In : IEEE Microwave and Wireless Components Letters. 27, 1, p. 49-51 7769195.

Research output: Contribution to journalArticle

Open Access
File
8 Citations (Scopus)
143 Downloads (Pure)
2012

Cryogenic Machining of Carbon Fibre

Dhokia, V., Shokrani Chaharsooghi, A. & Newman, S., 2012.

Research output: Contribution to conferencePaper

3 Citations (Scopus)
2017

Cervical spine posture influences fracture patterns caused by impact loading

Agostinho Hernandez, B., Blackburn, J., Cazzola, D., Holsgrove, T., Gill, H. & Gheduzzi, S., Sep 2017.

Research output: Contribution to conferenceOther

2008

Incorporation of THD boundary conditions for the efficient evaluation of journal bearing performance

Keogh, P. S. & Khonsari, M. M., 2008, p. 357-358. 2 p.

Research output: Contribution to conferencePaper

2001

Towards a Renewable Energy Policy for Northern Ireland

Norton, B., Griffiths, P. W. & Lo, S. N. G., 2001, p. 321-325. 5 p.

Research output: Contribution to conferencePaper

1997

Gait analysis

Gill, H., Biden, E., Cooke, P. & O'Connor, JJ., 1997, Assessment Methodology in Orthopaedics. Pynsent, P. B., Carr, A. J. & Fairbank, J. (eds.). Butterworth-Heinemann, 273 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2008

Assessing User Behaviour for Changes in the Design of Energy Using Domestic Products

Elias, E., Dekoninck, E. & Culley, S., 19 May 2008.

Research output: Contribution to conferencePaper

File
11 Citations (Scopus)
135 Downloads (Pure)
2005

Early age temperature rises in GGBS concrete: Part 1: Determination of T1 values

Zheng, L., Paine, K. A. & Dhir, R. K., 2005, Cement Combinations for Durable Concrete. Dhir, R. K., Harrison, T. A. & Newlands, M. D. (eds.). London: Thomas Telford, p. 173-182 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2007

Complementary post-buckling analyses of truss-lattice shear panels

Williams, P. A., Butler, R., Kim, H. A. & Hunt, G. W., 2007, p. 5048-5059. 12 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)
2005

The N-nitrosomethylethylamine (NMEA), new disinfection byproducts, formation during water disinfection with chlorine

Andrzejewski, P., Kasprzyk-Hordern, B. & Nawrocki, J., 2005, Proceedings of the 9th International Conference on Environmental Science and Technology. Lekkas, T. D. (ed.). Athens: University of the Aegean, p. A100-A106 (Proceedings of the International Conference on Environmental Science and Technology).

Research output: Chapter in Book/Report/Conference proceedingChapter

2012

Study of the effects of cryogenic machining on the machinability of Ti-6Al-4V titanium alloy

Shokrani, A., Dhokia, V. & Newman, S., 2012, Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012. Bedford, U. K.: EUSPEN, Vol. 2. p. 283-286 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)
2002

Vortex Flows over Fixed-Wing Micro Air Vehicles

Gursul, I., Taylor, G. & Wooding, C. L., Jan 2002, p. AIAA-2002-0698.

Research output: Contribution to conferencePaper

33 Citations (Scopus)
2006

Proximal femur impaction grafting: when half a loaf will do

McLardy-Smith, P., Hauptfleisch, J., Pandit, H. & Gill, H. S., 2006, In : Orthopedics. 29, 9, p. 814-815 2 p.

Research output: Contribution to journalArticle

2012

Sustainable architecture and building materials with low environmental impact

Walker, P., 2012

Research output: Non-textual formDigital or Visual Products

2003

An Investigation of Support Interference in High Angle of Attack Testing

Taylor, G., Gursul, I. & Greenwell, D., Jan 2003, p. AIAA-2003-1105.

Research output: Contribution to conferencePaper

162 Citations (Scopus)
2002
14 Citations (Scopus)

Antibiotic elution from bone cement: A study of common cement-antibiotic combinations

Armstrong, M., Spencer, R. F., Lovering, A. M., Gheduzzi, S., Miles, A. W. & Learmonth, I. D., 2002, In : Hip International. 12, 1, p. 23-27 5 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)
2019

Using fabric to shape appropriate frp-reinforced concrete structures

Kostova, K. Z., Ibell, T. J., Darby, A. P. & Evernden, M. C., 1 Jan 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). CRC Press, p. 17-22 6 p. (Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cryogenic drilling of carbon fibre reinforced plastic with tool consideration

Shokrani, A., Leafe, H. & Newman, S. T., 31 Dec 2019, In : Procedia CIRP. 85, p. 55-60 6 p.

Research output: Contribution to journalConference article

Open Access
2009

Risk factors for inflammatory pseudotumour formation following hip resurfacing

Glyn-Jones, S., Pandit, H., Kwon, Y. M., Doll, H., Gill, H. S. & Murray, D. W., 2009, In : Journal of Bone and Joint Surgery - British Volume. 91, 12, p. 1566-1574 9 p.

Research output: Contribution to journalArticle

245 Citations (Scopus)
2002

Investigation into the processing and characterisation of piezoelectric nanocomposites

Panteny, S. R., Bowen, C. R. & Stevens, R., 2002, In : Advances in Composite Materials and Structures, Parts 1 and 2. 206-2, p. 1313-1316 4 p.

Research output: Contribution to journalArticle

2012

Effects of reinforcement geometry on strength and stiffness in adhesively bonded steel-timber flexural beams

Alam, P., Ansell, M. & Smedley, D., 2012, In : Intelligent Buildings International. 2, 3, p. 231-244

Research output: Contribution to journalArticle

4 Citations (Scopus)

Blockwise Landweber method for 3D magnetic inductiont tomography

Wei, H-Y. & Soleimani, M., 2012.

Research output: Contribution to conferencePaper

2004

Effect of Steady Blowing on Wing Tip Flowfield

Margaris, P. & Gursul, I., Jun 2004, p. AIAA-2004-2619.

Research output: Contribution to conferencePaper

11 Citations (Scopus)
2014

Spinal muscle activity in simulated rugby union scrummaging is affected by different engagement conditions

Stone, B., Cazzola, D., McGuigan, P., Holsgrove, T., Gill, R., Gheduzzi, S., Miles, T., Stokes, K., Trewartha, G. & Preatoni, E., 15 Sep 2014, Book of Abstract of the 10th Bath Biomechanics Symposium: Current Issues and Future Opportunities in Orthopaedic Research.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
131 Downloads (Pure)
2015

Environmental performance of nano-structured Ca(OH)2/TiO2 photocatalytic coatings for buildings

Nuño, M., Pesce, G. L., Bowen, C. R., Xenophontos, P. & Ball, R. J., Oct 2015, In : Building and Environment. 92, p. 734-742

Research output: Contribution to journalArticle

Open Access
18 Citations (Scopus)
2016

Theory and Modeling of Asymmetric Catalytic Reactions

Lam, Y. H., Grayson, M. N., Holland, M. C., Simon, A. & Houk, K. N., 19 Apr 2016, In : Accounts of Chemical Research. 49, 4, p. 750-762 13 p.

Research output: Contribution to journalArticle

80 Citations (Scopus)
2018

Initiatives for Addressing Antimicrobial Resistance in the Environment: Current Situation and Challenges

Aga, D., Davies, J., Gandra, S., Kasprzyk-Hordern, B., Larsson, J., McLain, J., Singer, A., Snape, J., Slijkhuis, H., Sweetman, A. & Voulvoulis, N., 2018, Wellcome Trust. 94 p.

Research output: Book/ReportCommissioned report

2012
6 Citations (Scopus)
2011
19 Citations (Scopus)
2010

Characterisation and modelling of the cured shapes of arbitrary layup bistable composite laminates

Betts, D., Salo, A. I. T., Bowen, C. & Kim, H. A., Mar 2010, In : Composite Structures. 92, 7, p. 1694-1700 7 p.

Research output: Contribution to journalArticle

68 Citations (Scopus)
2015
22 Citations (Scopus)
2011

A modified posterior approach preserves femoral head oxgenation during hip resurfacing

Steffen, R. T., De Smet, K. A., Murray, D. W. & Gill, H. S., 2011, In : Journal of Arthroplasty. 26, 3, p. 404-408 5 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)
2012

Second Generation Hybrid System Design for Reduced CO2

Brace, C., Akehurst, S. & Plummer, A., 2012

Research output: Non-textual formWeb publication/site

2013

Pressure imaging using EIT on conductive fabric

Yang, C. L. & Soleimani, M., 2013.

Research output: Contribution to conferencePaper

Enhancing indoor comfort in existing apartment buildings in Athens using natural ventilation

Spentzou, E., Cook, M. & Emmitt, S., 2013, Proceedings of the 13th International Conference of the International Building Performance Simulation Association, 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

Electromechanical Properties in Composites Based on Ferroelectrics

Topolov, V. Y. & Bowen, C., 2009, London, UK: Springer. ( Engineering Materials and Processes; vol. 48)

Research output: Book/ReportBook

Guest editorial: Design management for sustainability

Emmitt, S., 1 Dec 2009, In : Architectural Engineering and Design Management. 5, 1-2, p. 3-4 2 p.

Research output: Contribution to journalEditorial

Open Access
1 Citation (Scopus)
2019

Challenges in the Design of Lab-on-PCB Platforms

Moschou, D., 16 Jan 2019.

Research output: Contribution to conferencePaper

2020
Open Access
File
101 Downloads (Pure)
2019

Micro-scale to nano-scale generators for energy harvesting: Self powered piezoelectric, triboelectric and hybrid devices

Chandrasekaran, S., Bowen, C., Roscow, J., Zhang, Y., Dang, D. K., Kim, E. J., Misra, R. D. K., Deng, L., Chung, J. S. & Hur, S. H., 23 Feb 2019, In : Physics Reports. 792, p. 1-33 33 p.

Research output: Contribution to journalReview article

23 Citations (Scopus)
2014

Professor Dino Bouchlaghem 7 July 1962-21 October 2013

Emmitt, S., 1 Jan 2014, In : Architectural Engineering and Design Management. 10, 3-4, p. 181-182 2 p.

Research output: Contribution to journalEditorial

2013

Preoperative pain location is a poor predictor of outcome after Oxford unicompartmental knee arthroplasty at 1 and 5 years

Liddle, A. D., Pandit, H., Jenkins, C., Price, A. J., Dodd, C. A. F., Gill, H. S. & Murray, D. W., Nov 2013, In : Knee Surgery, Sports Traumatology, Arthroscopy. 21, 11, p. 2421-2426

Research output: Contribution to journalArticle

Open Access
File
16 Citations (Scopus)
145 Downloads (Pure)
2016

Photocatalytic Properties of Commercially Available TiO2 Powders for Pollution Control

Nuño, M., Ball, R. & Bowen, C., Aug 2016, Nanotechnology and Nanomaterials "Semiconductor Photocatalysis - Materials, Mechanisms and Applications". p. 613 23 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
File
140 Downloads (Pure)