Research output per year
Research output per year
Search results
-
2024
A Model of Mass and Heat Transfer for Disc Temperature Prediction in Open Compressor Cavities
Nicholas, T. E. W., Scobie, J. A., Lock, G. D. & Tang, H., 30 Apr 2024, In: Journal of Turbomachinery: Transactions of the ASME. 146, 4, 041001.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Conjugate Modeling of a Closed Co-Rotating Compressor Cavity
Parry, J., Tang, H., Scobie, J., Lock, G. & Carnevale, M., 1 May 2024, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 146, 5, 14 p., 051007.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
2023
A Model of Mass and Heat Transfer for Disc Temperature Prediction in Open Compressor Cavities
Nicholas, T., Scobie, J., Lock, G. & Tang, H., 28 Sept 2023, Heat Transfer: Internal Air Systems. Vol. 7B. 12 p. GT2023-102248Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
Conjugate Modelling of a Closed Co-Rotating Compressor Cavity
Parry, J., Tang, H., Scobie, J. A., Lock, G. D. & Carnevale, M., 28 Sept 2023, Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling: Internal Air Systems. Vol. 7B. 13 p. v07bt14a012. (Proceedings of the ASME Turbo Expo; vol. 7-B).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
Experimental Investigation of Transient Flow Phenomena in Rotating Compressor Cavities
Pernak, M., Nicholas, T., Williams, J., Jackson, R., Tang, H., Lock, G. & Scobie, J., 31 Dec 2023, In: Journal of Turbomachinery: Transactions of the ASME. 145, 12, 28 p., TURBO-23-1143.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Experimental Investigation of Transient Flow Phenomena in Rotating Compressor Cavities
Pernak, M. J., Nicholas, T. E. W., Williams, J. T., Jackson, R. W., Tang, H., Lock, G. D. & Scobie, J. A., 28 Sept 2023, Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling: Internal Air Systems. Vol. 7B. 17 p. v07bt14a006. (Proceedings of the ASME Turbo Expo; vol. 7-B).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
Plume Model for Buoyancy-Induced Flow and Heat Transfer in Closed Rotating Cavities
Tang, H. & Owen, J. M., 31 Jan 2023, In: Journal of Turbomachinery. 145, 1, 10 p., 011005 .Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Stratified and Buoyancy-Induced Flow in Closed Compressor Rotors
Lock, G., Jackson, R., Pernak, M., Pountney, O., Sangan, C., Owen, J. M., Tang, H. & Scobie, J., 31 Jan 2023, In: Journal of Turbomachinery. 145, 1, 12 p., 011008.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Transient heat transfer and temperatures in closed compressor rotors
Nicholas, T. E. W., Pernak, M. J., Scobie, J. A., Lock, G. D. & Tang, H., 25 Jul 2023, In: Applied Thermal Engineering. 230, Part B, 14 p., 120759.Research output: Contribution to journal › Article › peer-review
Open Access -
2022
A Bayesian model to solve a two-dimensional inverse heat transfer problem of gas turbine discs
Cao, N., Luo, X. & Tang, H., 30 Sept 2022, In: Applied Thermal Engineering. 214, 118762.Research output: Contribution to journal › Article › peer-review
Open Access -
Measurement of Heat Transfer and Flow Structures in a Closed Rotating Cavity
Jackson, R., Tang, H., Scobie, J., Owen, M. & Lock, G., 31 May 2022, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 144, 5, 10 p., 051005 .Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Plume model for buoyancy-induced flow and heat transfer in closed rotating cavities
Tang, H. & Owen, M., 28 Oct 2022, Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling. American Society of Mechanical Engineers (ASME), V06BT14A002. (Proceedings of the ASME Turbo Expo; vol. 6-B).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
Open Access -
Stratified and Buoyancy-Induced Flow in Closed Compressor Rotors
Lock, G., Jackson, R., Pernak, M., Pountney, O., Sangan, C., Owen, M., Tang, H. & Scobie, J., 28 Oct 2022, Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling. American Society of Mechanical Engineers (ASME), V06BT14A007. (Proceedings of the ASME Turbo Expo; vol. 6-B).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
Open Access -
Unsteady Pressure Measurements in a Heated Rotating Cavity
Jackson, R., Tang, H., Scobie, J., Pountney, O., Sangan, C., Owen, M. & Lock, G., 30 Apr 2022, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 144, 4, 041017.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Use of Bayesian statistics to calculate transient heat fluxes on compressor disks
Tang, H., Deveney, T., Shardlow, T. & Lock, G., 26 Apr 2022, In: Physics of Fluids. 34, 5, 056108.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
2021
Analysis of shroud and disk heat transfer in aero-engine compressor rotors
Jackson, R., Tang, H., Scobie, J., Pountney, O., Sangan, C., Owen, M. & Lock, G., 30 Sept 2021, In: Journal of Engineering for Gas Turbines and Power. 143, 9, 11 p., 091005.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Calibration of thermopile heat flux gauges using a physically-based equation
Pountney, O., Patinios, M., Tang, H., Luberti, D., Sangan, C., Scobie, J., Owen, M. & Lock, G., 1 Nov 2021, In: Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy. 235, 7, p. 1806-1816 11 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Design and Testing of a Rig to Investigate Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors
Luberti, D., Patinios, M., Jackson, R., Tang, H., Pountney, O., Scobie, J., Sangan, C., Owen, M. & Lock, G., Apr 2021, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 143, 041030Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Effect of Radiation on Heat Transfer inside Aeroengine Compressor Rotors
Tang, H. & Owen, M., 31 May 2021, In: Journal of Turbomachinery. 143, 5, 21 p., 051005.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Measurement and Analysis of Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors
Jackson, R., Luberti, D., Tang, H., Pountney, O., Scobie, J., Sangan, C., Owen, M. & Lock, G., 1 Jun 2021, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 143, 6, 061004.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Measurement of Heat Transfer and Flow Structures in a Closed Rotating Cavity
Jackson, R., Tang, H., Scobie, J., Owen, M. & Lock, G., 2021, Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 5B. U. S. A., V05BT14A013. (Proceedings of the ASME Turbo Expo; vol. 5B-2021).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
Unsteady Pressure Measurements in a Heated Rotating Cavity
Jackson, R., Tang, H., Scobie, J., Pountney, O., Sangan, C., Owen, M. & Lock, G., 31 Dec 2021, Proceedings of ASME Turbo Expo 2021: Volume 5B. U. S. A.: American Society of Mechanical Engineers (ASME), V05BT14A005. (Proceedings of the ASME Turbo Expo; vol. 5B-2021).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
Open AccessFile -
2020
Influence of Temperature Distribution on Radial Growth of Compressor Discs
Luberti, D., Tang, H., Scobie, J., Pountney, O., Owen, M. & Lock, G., 31 Jul 2020, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 142, 7, 071004.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
2018
Buoyancy-Induced Flow and Heat Transfer in Compressor Rotors
Tang, H., Puttock-Brown, M. R. & Owen, J. M., 1 Jul 2018, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 140, 7, 9 p., 071902.Research output: Contribution to journal › Article › peer-review
-
Buoyancy-Induced Heat Transfer inside Compressor Rotors: Overview of Theoretical Models
Owen, J. M., Tang, H. & Lock, G. D., 17 Mar 2018, In: Aerospace. 5, 1, p. 1-22 22 p., 32.Research output: Contribution to journal › Article › peer-review
Open Access -
Theoretical Model of Buoyancy-Induced Heat Transfer in Closed Compressor Rotors
Tang, H. & Owen, J., 1 Mar 2018, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 140, 3, p. 1-7 7 p., 032605.Research output: Contribution to journal › Article › peer-review
-
2017
Effect of buoyancy-induced rotating flow on temperatures of compressor disks
Tang, H. & Michael Owen, J., 1 Jun 2017, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 139, 6, 062506.Research output: Contribution to journal › Article › peer-review