• 4 EAST 2.36

Accepting PhD Students

20062023

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

A NEW PERSONALISED LINER WITH EMBEDDED TEMPERATURE AND HUMIDITY SENSORS FOR LOWER LIMB AMPUTEES

Paternò, L., Dhokia, V. & Seminati, E., 2020.

Research output: Contribution to conferenceAbstract

2019
Open Access

Characterisation of austenitic 316LSi stainless steel produced by wire arc additive manufacturing with interlayer cooling

Cunningham, C., Wang, J., Dhokia, V., Shokrani Chaharsooghi, A. & Newman, S., 1 Nov 2019, International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference Proceedings. (International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
15 Downloads (Pure)

Comparing different types of professional practitioner engagement in an integrated design engineering degree

Georgilas, I., Dekoninck, E., Dhokia, V., Flynn, J. & Elias, E., 1 Jan 2019, Proceedings of the 21st International Conference on Engineering and Product Design Education: Towards a New Innovation Landscape, E and PDE 2019. Bohemia, E., Kovacevic, A., Buck, L., Brisco, R., Evans, D., Grierson, H., Ion, W. & Whitfield, R. I. (eds.). Design Society, (Proceedings of the 21st International Conference on Engineering and Product Design Education: Towards a New Innovation Landscape, E and PDE 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deterministic modelling and simulations of the internal cooling of end mills

Rance, J., Flynn, J., Dhokia, V. & Shokrani Chaharsooghi, A., 2019, In : Procedia CIRP. 82, p. 421-426 6 p.

Research output: Contribution to journalConference article

Open Access

Generating an object representation to be manufactured

Dhokia, V., Flynn, J. & Essink, W., 2019, Patent No. WO2018130820 (A1) / GB2560691 (A), 9 Jan 2018, Priority date 12 Jan 2017, Priority No. 1700545.5

Research output: Patent

Next generation safety footwear

Janson, D., Newman, S. T. & Dhokia, V., 2019, In : Procedia Manufacturing. 38, p. 1668-1677 10 p.

Research output: Contribution to journalConference article

Open Access

Reliability of Three Different Methods for Assessing Amputee Residuum Shape and Volume

Bilzon, J., Canepa Talamas, D., Young, M., Twiste, M., Dhokia, V. & Seminati, E., Apr 2019, (Accepted/In press).

Research output: Contribution to conferenceAbstract

Volume adaptation of the residuum of lower limb amputees over short and long term

Seminati, E., Canepa Talamas, D., Young, M., Twiste, M., Dhokia, V. & Bilzon, J., Apr 2019, (Accepted/In press).

Research output: Contribution to conferenceAbstract

2018

Analysis of co-design scenarios and activities for the development of a spatial-augmented reality design platform

Morosi, F., Carli, I., Caruso, G., Cascini, G., Dhokia, V. & Ben Guefrache, F., 1 Jan 2018, Proceedings of the DESIGN 2018 15th International Design Conference. Bojcetic, N., Pavkovic, N., Marjanovic, D., Storga, M. & Skec, S. (eds.). Faculty of Mechanical Engineering and Naval Architecture, p. 381-392 12 p. (Design).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)
Open Access
File
2 Citations (Scopus)
150 Downloads (Pure)
16 Downloads (Pure)

Computer numerical control machine tool information reusability within virtual machining systems

Vichare, P., Dhokia, V., Zhang, X., Cheung, W. M., Xiao, W. & Zheng, L., 1 Mar 2018, In : Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 232, 4, p. 593-604 12 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
122 Downloads (Pure)

Edge trimming of carbon fibre reinforced plastic

Cunningham, C., Shokrani Chaharsooghi, A. & Dhokia, V., 31 Dec 2018, In : Procedia CIRP. 77, 2018, p. 199-202 4 p.

Research output: Contribution to journalConference article

Open Access
File
1 Citation (Scopus)
90 Downloads (Pure)
Open Access
File
19 Citations (Scopus)
143 Downloads (Pure)
Open Access
File
49 Citations (Scopus)
60 Downloads (Pure)

Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts

Xu, F., Dhokia, V., Colegrove, P., McAndrew, A., Williams, S., Henstridge, A. & Newman, S. T., 2018, In : International Journal of Computer Integrated Manufacturing. 31, 8, p. 785-798 14 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
99 Downloads (Pure)

Reliability of 3 different methods for assessing amputees residdum volume

Seminati, E., Young, M., Canepa Talamas, D., Dhokia, V. & Bilzon, J., 13 Oct 2018.

Research output: Contribution to conferenceAbstract

Open Access
File
27 Downloads (Pure)

Techniques for object representation

Flynn, J., Dhokia, V. & Essink, W., 26 Sep 2018, IPC No. G06F17/50;, Patent No. GB2560691A, 20 Jan 2017, Priority date 13 Jan 2017, Priority No. 1700545

Research output: Patent

The Design and Manufacture of a Bespoke Neoprene Prosthetic Liner – A Case Study

Young, M., Seminati, E., Dhokia, V., Canepa Talamas, D., Bilzon, J. & Odanye, T., 13 Oct 2018.

Research output: Contribution to conferenceAbstract

2017

A Data Visualization Dashboard for Exploring the Additive Manufacturing Solution Space

Goguelin, S., Flynn, J. M., Essink, W. P. & Dhokia, V., 9 May 2017, In : Procedia CIRP. 60, p. 193-198 6 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
167 Downloads (Pure)
Open Access
File
8 Citations (Scopus)
178 Downloads (Pure)
Open Access
File
15 Citations (Scopus)
197 Downloads (Pure)

A prototype personalised liner for lower limb amputees: design, manufacture and preliminary test results.

Seminati, E., Canepa Talamas, D. A., Dhokia, V., Young, M., Twiste, M. & Bilzon, J., 17 Mar 2017.

Research output: Contribution to conferencePoster

File
57 Downloads (Pure)
Open Access
File
44 Downloads (Pure)

Cost modelling and sensitivity analysis of wire and arc additive manufacturing

Cunningham, C., Wikshåland, S., Xu, F., Kemakolam, N., Shokrani Chaharsooghi, A., Dhokia, V. & Newman, S., 18 Sep 2017, p. 650-657.

Research output: Contribution to conferencePaper

Open Access
18 Citations (Scopus)
Open Access
File
12 Citations (Scopus)
157 Downloads (Pure)

Innovative Framework for Immersive Metrology

Canepa-Talamas, D., Nassehi, A. & Dhokia, V., 9 May 2017, In : Procedia CIRP. 60, p. 110-115 6 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Residuum volume and shape assessment after lower limb amputation: validity and reliability of a new structured light 3D scanner

Seminati, E., Canepa Talamas, D. A., Dhokia, V., Young, M., Twiste, M. & Bilzon, J., 8 May 2017, p. 316.

Research output: Contribution to conferenceAbstract

Open Access
File
68 Downloads (Pure)

Smart manufacturability analysis for digital product development

Goguelin, S., Colaco, J., Dhokia, V. & Schaefer, D., 9 May 2017, In : Procedia CIRP. 60, p. 56-61

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
127 Downloads (Pure)

Strategies to realize decentralized manufacture through hybrid manufacturing platforms

Kendrick, B. A., Dhokia, V. & Newman, S. T., 1 Feb 2017, In : Robotics and Computer-Integrated Manufacturing. 43, p. 68-78 11 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Supporting Part Inspection with a Mixed Reality Headset

Canepa Talamas, D., Flynn, J., Nassehi, A. & Dhokia, V., 2017, (Unpublished).

Research output: Contribution to conferenceOther

The design and manufacture of a personalized liner for lower limb amputees

Dhokia, V., Bilzon, J., Seminati, E., Canepa Talamas, D. A., Young, M. & Mitchell, W., 2017, In : Procedia CIRP. 60, p. 476-481 5 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Validity and reliability of a novel 3D scanner for assessment of the shape and volume of amputees’ residual limb models

Seminati, E., Canepa Talamas, D., Young, M., Twiste, M., Dhokia, V. & Bilzon, J., 8 Sep 2017, PLoS ONE, 12, 9, p. 0184498 16 p.

Research output: Contribution to specialist publicationArticle

Open Access
File
13 Citations (Scopus)
134 Downloads (Pure)
2016

A bottom-up design framework for CAD tools to support design for additive manufacturing

Goguelin, S., Flynn, J. M. & Dhokia, V., 2 Apr 2016, Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies. Springer Science and Business Media Deutschland GmbH, Vol. 52. p. 411-421 11 p. (Smart Innovation, Systems and Technologies; vol. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
1 Citation (Scopus)
137 Downloads (Pure)

Additive manufacturing simulation using signed distance fields

Barclay, J., Dhokia, V. & Nassehi, A., 2 Apr 2016, Sustainable Design and Manufacturing, 2016. Springer Science and Business Media Deutschland GmbH, p. 435-444 10 p. (Smart Innovation, Systems and Technologies; vol. 52).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
Open Access
File
14 Citations (Scopus)
143 Downloads (Pure)

A Surface Modification Decision Tree to Influence Design in Additive Manufacturing

Gordon, E., Shokrani Chaharsooghi, A., Flynn, J., Goguelin, S., Barclay, J. & Dhokia, V., 4 Apr 2016. 10 p.

Research output: Contribution to conferencePaper

Open Access
File
8 Citations (Scopus)
169 Downloads (Pure)
Open Access
File
17 Citations (Scopus)
116 Downloads (Pure)

Comparative performance between two photogrammetric systems and a reference laser tracker network for large‐volume industrial measurement

Martin, O. C., Robson, S., Kayani, A., Muelaner, J., Dhokia, V. & Maropoulos, P. G., 4 Sep 2016, In : The Photogrammetric Record. 31, 155, p. 348-360

Research output: Contribution to journalArticle

1 Citation (Scopus)

Cryogenic High Speed Machining of Cobalt Chromium Alloy

Shokrani Chaharsooghi, A., Dhokia, V. & Newman, S., 30 May 2016, In : Procedia CIRP. 46, p. 404 4 p.

Research output: Contribution to journalArticle

Open Access
File
10 Citations (Scopus)
140 Downloads (Pure)

High Speed Cryogenic Drilling of Grade 5 ELI Titanium Alloy

Shokrani Chaharsooghi, A., Sun, H., Dhokia, V. & Newman, S., 2016.

Research output: Contribution to conferencePaper

Open Access
File
86 Downloads (Pure)
Open Access
File
122 Citations (Scopus)
715 Downloads (Pure)

Improving error models of machine tools with metrology data

Flynn, J. M., Muelaner, J. E., Dhokia, V. & Newman, S. T., 1 Sep 2016, In : Procedia CIRP. 52, p. 204-209 6 p.

Research output: Contribution to journalArticle

Open Access

Investigation of part distortions as a result of hybrid manufacturing

Zhu, Z., Dhokia, V., Nassehi, A. & Newman, S. T., 1 Feb 2016, In : Robotics and Computer-Integrated Manufacturing. 37, p. 23-32 10 p., 1348.

Research output: Contribution to journalArticle

File
21 Citations (Scopus)
151 Downloads (Pure)
Open Access
File
91 Citations (Scopus)
139 Downloads (Pure)
Open Access
File
4 Citations (Scopus)
120 Downloads (Pure)

STEP-based conceptual framework for measurement planning integration

Mahmoud, H., Dhokia, V. & Nassehi, A., 2016, In : Procedia CIRP. 43, p. 315-320 6 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)
2015

Cryogenic Machining of High Performance Materials

Dhokia, V., Shokrani Chaharsooghi, A., Newman, S. & Buckingham, M., 2015.

Research output: Contribution to conferenceAbstract

Open Access
File
31 Downloads (Pure)

Dematerialized manufacturing systems

Muniain, J. Z., Valente, A. & Dhokia, V., 2015, In : International Journal of Computer Integrated Manufacturing. 28, 4, p. 337-338 2 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)