Tony Miles

Search results

• 2014

  A novel method to measure the micromotion of acetabular cup after total hip replacement

  Crosnier, E., Keogh, P. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  71 Downloads (Pure)

• Assessment of head displacement and disassembly force with increasing assembly load at the modular head/trunnion junction of a total hip replacement prosthesis

  Ramoutar, D., Crosnier, E. A., Gill, R. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  84 Downloads (Pure)

• Femoral component rotation of a modern tka implant does not affect pfj biomechanics

  Coles, L. G., Gheduzzi, S. & Miles, A. W., 23 Jun 2014.

  Research output: Contribution to conference › Paper › peer-review

  File

  • Implant 100%
  • Prosthesis 100%
  • Knee Arthroplasty 100%
  • Knee Pain 100%
  • Surgical Error 100%
  70 Downloads (Pure)

• Initial stability of acetabular cups under physiological conditions: comparing heel strike to the full gait cycle

  Crosnier, E., Keogh, P. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper

  File
  65 Downloads (Pure)

• Six degrees of freedom assessment of micromotion of press-fit acetabular cups should be carried out under dynamic hip motion

  Crosnier, E., Scrivens, D., Keogh, P. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  64 Downloads (Pure)

• The Effect of Femoral Rotation During Total Knee Arthroplasty on Patellofemoral Contact Characteristics

  Coles, L. G., Gheduzzi, S. & Miles, A. W., 8 Jul 2014.

  Research output: Contribution to conference › Paper › peer-review

  File

  • Joints (Structural Components) 100%
  • Motion 100%
  • Tension 100%
  • Joint Mobility 100%
  • Total Knee Arthroplasty 100%
  95 Downloads (Pure)

• Volar Locking Plates for Distal Radius Fractures: A Biomechanical Study Investigating Optimal Locking Screw Trajectory

  Avis, D., Wright, S., Forder, J., Miles, A. W. & Holsgrove, T. P., Jun 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  95 Downloads (Pure)
• 2013

  An in-vitro investigation of shear strength of cement on cement mantles

  Holsgrove, T. P., Pentlow, A. & Miles, A. W., Oct 2013.

  Research output: Contribution to conference › Paper › peer-review

• Development of a synthetic collateral ligament model for use in an in vitro kinematic knee simulator

  Fitzgerald, L. G., Miles, A. W. & Titchener, A., 14 Oct 2013.

  Research output: Contribution to conference › Paper › peer-review

• Disassembly force for modular head/trunnion junction increases with increasing assembly load

  Ramoutar, D., Crosnier, E., Gill, H. S. & Miles, A. W., 2013.

  Research output: Contribution to conference › Paper

• Effect of stem trunnion roughness and assembly force on modular junction strength

  Jauch, S. Y., Brace, M., Miles, A. W. & Gill, H. S., Nov 2013.

  Research output: Contribution to conference › Paper › peer-review

• Linking proximal femur morphology to that of the distal femur

  Wright, S., Kessler, O., Boymans, T., Miles, A. W. & Grimm, B., Oct 2013.

  Research output: Contribution to conference › Paper › peer-review

• The assembly load influences the fretting behaviour at taper interfaces of modular hip prostheses: an in vitro study

  Jauch, S. Y., Ng, L. V., Peirce, S. R., Dhokia, V., Miles, A. W. & Gill, H. S., Oct 2013.

  Research output: Contribution to conference › Paper

• To hit or not to hit: Modular hips, a review of assembly methodology

  Mitra, A., Fitzgerald, L., Gill, H. S. & Miles, A. W., 2013.

  Research output: Contribution to conference › Paper

• Why does a collared and anatomically shaped total hip stem yield successful clinical results?

  Wright, S., Pincher, N. & Miles, A. W., Oct 2013.

  Research output: Contribution to conference › Paper › peer-review
• 2012

  An in-vitro biomechanical study of the torsional resistance of cemented polished femoral revision stems with distal stem features

  Holsgrove, T. P., Petheram, T. G., Timperley, A. J. & Miles, A. W., Sept 2012.

  Research output: Contribution to conference › Paper › peer-review

• Biologic Fixation - A Systematic Approach

  Schmotzer, H., Gheduzzi, S., Holsgrove, T. P. & Miles, A. W., Apr 2012.

  Research output: Contribution to conference › Paper › peer-review

• Dynamic Comparison of Porcine Lumbar Specimens with Intact Discs and Disc Replacements

  Holsgrove, T. P., Gheduzzi, S. & Miles, A. W., Sept 2012.

  Research output: Contribution to conference › Paper › peer-review
• 2008

  An implantable system for the in vivo measurement of Hip and Knee migration and micromotion

  Hao, S., Taylor, J., Miles, A. W. & Bowen, C. R., 2008, p. 445-448. 4 p.

  Research output: Contribution to conference › Paper › peer-review

  • Micromotion 100%
  • Calibration Process 100%
  • Null Point 33%
  • Linear Variable Differential Transformer 33%
  • Measurement 33%
  9 Citations (SciVal)
• 2007

  In-vitro study of influence of impaction energy on medial strain distribution in the femur during impaction grafting

  Mak, S. Y., Holsgrove, T. P. & Miles, A. W., Mar 2007.

  Research output: Contribution to conference › Paper › peer-review
• 2005

  Comparison of biomechanical properties of flexible steel and titanium intramedullary nails in adolescent fractures

  Reddy, V. R. M., Miles, A. W., Cunningham, J. L., Gheduzzi, S. & Henman, P., Jun 2005, p. 119-119. 1 p.

  Research output: Contribution to conference › Paper

• In-vitro post-operative stem stability using composite and cadaveric models

  Gheduzzi, S., Clements, J. P., Webb, J. C. J., Schmotzer, H., Learmonth, I. D. & Miles, A. W., Feb 2005.

  Research output: Contribution to conference › Paper
• 2004

  A hypothesis of carpal kinematics based upon maximisation of contact area

  Sirkett, D., Mullineux, G. M., Miles, A. W. & Giddins, G. E. B., Sept 2004.

  Research output: Contribution to conference › Paper
• 2002

  Intra-operative force measurement of impaction allografting

  Phipps, K., Saksena, J., Allwood, S. M., Miles, A. W., Goodship, A., Blunn, G., Leyvraz, P. F., Pioletti, D., Quinn, T. & Ph Zysset, [. V., Oct 2002.

  Research output: Contribution to conference › Paper
• 2000

  Knowledge-based integrated design/cost systems

  Hill, T. M., Bleakman, M., Earl, C. & Miles, A. W., 2000, p. 332-337. 6 p.

  Research output: Contribution to conference › Paper

• The validation of computer models of a mechanical ventilator and the human respiratory system intended for use in adult intensive care

  Murphy, C. M., Brook, B., Tilley, D. G., Miles, A. W., Breen, D. & Wilson, A. J., 2000, p. 251-254. 4 p.

  Research output: Contribution to conference › Paper

  17 Citations (SciVal)
• 1992

  Conceptual cost estimating at the conceptual stage of the Design Process

  Currie, C. G., Mileham, A. R., Bradford, D. T. & Miles, A. W., 1992, p. 600-605. 6 p.

  Research output: Contribution to conference › Paper

• Conceptual cost information as an aid to the designer

  Mileham, A. R., Currie, G. C., Miles, A. W. & Bradford, D. T., 1992, p. 119-224. 106 p.

  Research output: Contribution to conference › Paper
• 1991

  Conceptual cost estimating using complexity criteria

  Currie, C. G., Mileham, A. R., Bradford, D. T. & Miles, A. W., Aug 1991, p. 122-125. 4 p.

  Research output: Contribution to conference › Paper
• 1990

  Cost estimation of polymer products at the conceptual stage of design, advances in Man Tech V

  Currie, G. C., Mileham, A. R., Miles, A. W. & Bradford, D. T., Sept 1990, p. 18-22. 5 p.

  Research output: Contribution to conference › Paper