Tony Miles

Search results

• 2024

  The effect of structural changes on the low strain rate behaviour of the intervertebral disc

  Hayward, S., Keogh, P. S., Miles, A. W. & Gheduzzi, S., 30 Sept 2024, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 238, 8-9, p. 851-864 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Energy Engineering 100%
  • Lower Strain Rate 100%
  • Strain Rate 100%
  • Mechanical Property 50%
  • Bone Cement 50%
• 2020

  Biomechanical testing of fixed and adjustable femoral cortical suspension devices for ACL reconstruction under high loads and extended cyclic loading

  Singh, S., Ramos-Pascual, S., Czerbak, K., Malik, M., Schranz, P. J., Miles, A. W. & Mandalia, V., 11 May 2020, In: Journal of Experimental Orthopaedics. 7, 1, 27.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Cyclic Loading 100%
  • Failure Load 50%
  • Outcome Measure 50%
  • Prestressing 50%
  9 Citations (SciVal)

• Influence of pilot hole diameter in cancellous screw fixation in a reduced density animal bone model

  Stewart, A. J., Miles, A. W. & Fletcher, J. W. A., 31 Dec 2020, In: Clinical Biomechanics. 80, 105152.

  Research output: Contribution to journal › Article › peer-review

  • Bone Density 100%
  • Tibia 33%
  • Cancellous Bone 33%
  2 Citations (SciVal)

• Novel techniques demonstrate superior fixation of simple transverse patella fractures - A biomechanical study

  Lenihan, J., Ramos-Pascual, S., Silvestros, P., Beak, P., Miles, A. W. & Trompeter, A., 1 Jun 2020, In: Injury. 51, 6, p. 1288-1293 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Cyclic Loading 100%
  • Proof-of-Concept 100%
  • Test Rig 100%
  • Metal Working 100%
  • Real World Application 100%
  4 Citations (SciVal)
• 2019

  Novel techniques for superior fixation of simple transverse intra-articular patella fractures

  Lenihan, J. N., Ramos Pascual, S., Silvestros, P., Miles, A., Beak, P. & Trompeter, A., Sept 2019, British Orthopaedic Association Annual Congress 2019.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
• 2018

  The equivalence of multi-axis spine systems: Recommended stiffness limits using a standardized testing protocol

  Holsgrove, T., Amin, D., Ramos Pascual, S., Ding, B., Welch, W., Gheduzzi, S., Miles, A., Winkelstein, B. & Costi, J., 21 Mar 2018, In: Journal of Biomechanics. 70, p. 59-66 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Phase Shift 100%
  • Test System 75%
  • Principal Axis 50%
  • Confidence Interval 25%
  • Squared Difference 25%
  5 Citations (SciVal)

  201 Downloads (Pure)
• 2017

  Assessment of head displacement and disassembly force with increasing assembly load at the modular head/trunnion junction of a total hip replacement prosthesis

  Ramoutar, D., Crosnier, E., Shivji, F., Miles, A. & Gill, H., May 2017, In: Journal of Arthroplasty. 32, 5, p. 1675-1678

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Head Displacement 100%
  • Prosthesis 100%
  • Hip 100%
  • Load Level 50%
  • Frictional Force 25%
  12 Citations (SciVal)

  481 Downloads (Pure)

• Effect of trunnion roughness and length on the modular taper junction strength under typical intraoperative assembly forces

  Jauch-Matt, S., Miles, A. & Gill, H., Jan 2017, In: Medical Engineering & Physics . 39, p. 94-101

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fretting 100%
  • Neck 100%
  • Hip 100%
  • Implant 100%
  • Postoperative Complication 100%
  22 Citations (SciVal)

  432 Downloads (Pure)

• Non-invasive vibrometry-based diagnostic detection of acetabular cup loosening in Total Hip Replacement (THR)

  Alshuhri, A. A., Holsgrove, T. P., Miles, A. W. & Cunningham, J. L., Oct 2017, In: Medical Engineering & Physics . 48, p. 188-195

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Diagnosis 100%
  • Hip Replacement 100%
  • Acetabular Cup 100%
  • Imaging Technique 100%
  • Acetabular 50%
  11 Citations (SciVal)

  164 Downloads (Pure)

• The application of physiological loading using a dynamic, multi-axis spine simulator

  Holsgrove, T., Miles, A. & Gheduzzi, S., Mar 2017, In: Medical Engineering & Physics . 41, p. 74-80 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Axial Load 100%
  • Load Cell 66%
  • Noise Floor 66%
  • Similarities 33%
  • Control System 33%
  7 Citations (SciVal)

  263 Downloads (Pure)
• 2016

  A biomechanical study of the effects of simulated ulnar deviation on silicone finger joint implant failure

  Drayton, P., Morgan, B. W., Davies, M. C., Giddins, G. E. B. & Miles, A. W., Nov 2016, In: Journal of Hand Surgery-European Volume. 41, 9, p. 944-947 4 p.

  Research output: Contribution to journal › Article › peer-review

  File
  9 Citations (SciVal)

  367 Downloads (Pure)

• A comparison of stiffness and flexibility spinal testing protocols

  Ramos Pascual, S., Keogh, P., Miles, A. & Gheduzzi, S., 5 Sept 2016.

  Research output: Contribution to conference › Abstract › peer-review

  • Degree of Freedom 100%
  • Testing Method 100%
  • Axial Compression 100%
  • Stiffness Matrix 100%
  • Rotational 100%

• A comparison of testing protocols for the evaluation of spinal biomechanics

  Ramos Pascual, S., Keogh, P., Miles, A. & Gheduzzi, S., 2016, (Unpublished).

  Research output: Contribution to conference › Poster

  File
  186 Downloads (Pure)

• Cervical spine injury mechanism analysis in Rugby Union: Phase 3 report

  Trewartha, G., Preatoni, E., Stokes, K., Cazzola, D., Seminati, E., Gill, R., Miles, T., Gheduzzi, S. & Mahmoodi, P., 29 Jul 2016, University of Bath. 154 p.

  Research output: Book/Report › Commissioned report

• Pre-clinical testing protocols for the evaluation of spinal biomechanics

  Ramos Pascual, S., Keogh, P., Miles, A. & Gheduzzi, S., 5 Oct 2016.

  Research output: Contribution to conference › Abstract › peer-review

  • Degree of Freedom 100%
  • Implant 100%
  • Biomechanics 100%
  • Neutral Zone 100%
  • Axial Compression 100%

• The effect of dynamic hip motion on the micromotion of press-fit acetabular cups in six degrees of freedom

  Crosnier, E., Keogh, P. & Miles, A., 1 Aug 2016, In: Medical Engineering & Physics . 38, 8, p. 717-724 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Degree of Freedom 100%
  • Micromotion 100%
  • Press Fit 100%
  • Clinical Trial 100%
  • Long Term Survival 100%
  16 Citations (SciVal)

  312 Downloads (Pure)

• The influence of tibial component malalignment on bone strain in revision total knee replacement.

  Rastetter, B., Wright, S., Gheduzzi, S., Miles, A. & Clift, S., 21 May 2016, In: Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine. 230, 6, p. 561 568 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Finite Element Analysis 100%
  • Bone Stress 100%
  • Total Knee Arthroplasty 100%
  • Tibia 75%
  • Cortical Bone 50%
  5 Citations (SciVal)

  345 Downloads (Pure)
• 2015

  Analysis of strain in revision total knee replacement: Comparison of tibial compartment loads and stem alignment to intramedullary canal

  Rastetter, B., Wright, S., Gheduzzi, S., Miles, A. & Clift, S., Oct 2015. 3 p.

  Research output: Contribution to conference › Abstract

  • Knee 100%
  • Total Knee Arthroplasty 100%
  • Cortical Bone 75%
  • Tibia 75%
  • Cancellous Bone 75%

• An integrated multiscale analysis of injury mechanisms in sport impacts: an application to cervical spine biomechanics in rugby union scrummaging

  Preatoni, E., Cazzola, D., Holsgrove, T., Gheduzzi, S., Miles, A., Stokes, K., Gill, H. & Trewartha, G., 2015, Abstract Book of The 25th Congress of the International Society of Biomechanics. p. 10 11 p. AS-0003

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

  File

  • Multiscale 100%
  • Injury Mechanism 100%
  • Joints (Structural Components) 100%
  • Spine Biomechanics 100%
  • Motion 100%
  113 Downloads (Pure)

• An investigation into axial impacts of the cervical spine using digital image correlation

  Holsgrove, T. P., Cazzola, D., Preatoni, E., Trewartha, G., Miles, A. W., Gill, H. S. & Gheduzzi, S., 1 Aug 2015, In: The Spine Journal. 15, 8, p. 1856-1863 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Injury Mechanism 100%
  • Digital Image Correlation 100%
  • Observables 33%
  • Impact Loads 33%
  • Strain Field 33%
  12 Citations (SciVal)

  362 Downloads (Pure)

• Cement brand and preparation effects cement-in-cement mantle shear strength

  Holsgrove, T. P., Pentlow, A., Spencer, R. F. & Miles, A. W., Jan 2015, In: Hip International. 25, 1, p. 67-71

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shear Strength 100%
  • Simplex 100%
  • Palacos 100%
  • Tobramycin 28%
  • Bone Cement 14%
  4 Citations (SciVal)

  273 Downloads (Pure)

• Cervical spine injury mechanism analysis in Rugby Union: Phase 2 report

  Trewartha, G., Preatoni, E., Stokes, K., Cazzola, D., Seminati, E., Gill, R., Miles, T., Gheduzzi, S. & Mahmoodi, P., 31 Jul 2015, University of Bath. 176 p.

  Research output: Book/Report › Commissioned report

• Development of an acetabular cup loosening detection using vibration analysis.

  Alshuhri, A., Miles, A. & Cunningham, J., Sept 2015, 23rd Annual Meeting of EORS, Bristol.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

• Development of a non-invasive diagnostic technique for acetabular component loosening in total hip replacements

  Alshuhri, A., Holsgrove, T., Miles, A. W. & Cunningham, J., Aug 2015, In: Medical Engineering & Physics . 37, 8, p. 739-745 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Output Signal 100%
  • Constant Amplitude 100%
  • Relative Strength 100%
  • Sinusoidal Excitation 100%
  • Harmonics 100%
  27 Citations (SciVal)

  331 Downloads (Pure)

• Diagnostic of acetabular cup loosening with a non-invasive diagnostic technique based on vibration analysis

  Alshuhri, A., Miles, A. & Cunningham, J., 12 Jul 2015, 25th Congress of International Society of Biomechanics, Glasgow.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

• Dynamic, six-axis stiffness matrix characteristics of the intact intervertebral disc, and a disc replacement

  Holsgrove, T., Gill, H., Miles, A. & Gheduzzi, S., Nov 2015, In: Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine. 29, 11, p. 769-777

  Research output: Contribution to journal › Article › peer-review

  File
  3 Citations (SciVal)

  264 Downloads (Pure)

• Effect of trunnion characteristics and assembly force on the head-¬‐neck taper strength of a modular hip implant

  Jauch, S., Miles, A. & Gill, H., 5 Jul 2015, 21st Congress of European Society of Biomechanics, Prague.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

• Finite element analysis of the tibial component stem orientation in revision total knee replacement

  Rastetter, B., Wright, S., Gheduzzi, S., Miles, A. & Clift, S., Sept 2015.

  Research output: Contribution to conference › Abstract

  Open Access

  File

  • Finite Element Analysis 100%
  • Total Knee Arthroplasty 100%
  • Tibia 66%
  • Cortical Bone 33%
  • Surgery 16%
  78 Downloads (Pure)

• Kinematics of the natural and replaced knee

  Coles, L., Gheduzzi, S., Miles, A. & Gill, H., 30 Jun 2015, Total Knee Arthroplasty: Long Term Outcomes. Karachalios, T. (ed.). London, U. K.: Springer, p. 7-19

  Research output: Chapter or section in a book/report/conference proceeding › Book chapter
  3 Citations (SciVal)

• The dynamic, six-axis stiffness matrix testing of porcine spinal specimens

  Holsgrove, T. P., Gill, H. S., Miles, A. W. & Gheduzzi, S., 1 Jan 2015, In: The Spine Journal. 15, 1, p. 176-184 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stiffness Matrix 100%
  • Degree of Freedom 33%
  • Equilibration 33%
  • Biomechanics 16%
  • Axial Compression 16%
  17 Citations (SciVal)

  294 Downloads (Pure)

• The Morphology Of The Distal Femur Is Correlated With The Geometry Of The Proximal Femur

  Boymans, T., Wright, S., Grimm, B. P., Heyligers, I. C., Miles, A. & Kessler, O., May 2015, 16th Congress of EFORT, Prague.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

• Tibial strain distribution following RTKR surgery using precise compartmental physiological loading

  Wright, S., Gheduzzi, S. & Miles, A., 5 Jul 2015, 21st Congress of European Society of Biomechanics, Prague.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

• Traditional or Novel Knee Loading Techniques: A Comparison of in Vitro Strain Distribution in Composite Tibias Following Revision Total Knee Replacement (RTKR)

  Wright, S., Gheduzzi, S. & Miles, A., Oct 2015, ISTA 2015 . Vienna

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
• 2014

  A novel cervical spine (head/neck) musculoskeletal model for dynamic load analysis during rugby scrummaging

  Cazzola, D., Holsgrove, T. P., Preatoni, E., Stokes, K., Gheduzzi, S., Miles, T., Gill, R. & Trewartha, G., Jul 2014, Abstract Book of the 7th World Congress of Biomechanics. Boston, U. S. A., 2 p.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

• A novel method to assess primary stability of press-fit acetabular cups

  Crosnier, E., Keogh, P. & Miles, A. W., 11 Dec 2014, In: Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine. 228, 11, p. 1126-1134 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Press Fit 100%
  • Initial Stability 40%
  • Degree of Freedom 20%
  • Loading Condition 20%
  • Micromotion 20%
  39 Citations (SciVal)

  472 Downloads (Pure)

• A novel method to measure the micromotion of acetabular cup after total hip replacement

  Crosnier, E., Keogh, P. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  71 Downloads (Pure)

• Assessment of head displacement and disassembly force with increasing assembly load at the modular head/trunnion junction of a total hip replacement prosthesis

  Ramoutar, D., Crosnier, E. A., Gill, R. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  84 Downloads (Pure)

• Cervical spine injury mechanism analysis in Rugby Union: Phase 1 report

  Trewartha, G., Preatoni, E., Stokes, K., Cazzola, D., Gill, R., Miles, T., Gheduzzi, S. & Holsgrove, T., Sept 2014, University of Bath. 104 p.

  Research output: Book/Report › Commissioned report

• Does the surface finish, the taper angle difference and the assembly force effect the taper strength between stem and ball head of a modular hip implant?

  Jauch, S. Y., Miles, A. W. & Gill, H. S., 2014.

  Research output: Contribution to conference › Poster › peer-review

• Femoral component rotation of a modern tka implant does not affect pfj biomechanics

  Coles, L. G., Gheduzzi, S. & Miles, A. W., 23 Jun 2014.

  Research output: Contribution to conference › Paper › peer-review

  File

  • Implant 100%
  • Prosthesis 100%
  • Knee Arthroplasty 100%
  • Knee Pain 100%
  • Surgical Error 100%
  70 Downloads (Pure)

• Initial stability of acetabular cups under physiological conditions: comparing heel strike to the full gait cycle

  Crosnier, E., Keogh, P. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper

  File
  65 Downloads (Pure)

• In vitro method for assessing the biomechanics of the patellofemoral joint following total knee arthroplasty

  Coles, L., Gheduzzi, S. & Miles, A. W., 16 Dec 2014, In: Proceedings of the Institution of Mechanical Engineers, Part H - Journal of Engineering in Medicine. 228, 12, p. 1217-1226 10 p.

  Research output: Contribution to journal › Article › peer-review

  File

  • Joints (Structural Components) 100%
  • Biomechanics 100%
  • Total Knee Arthroplasty 100%
  • Physiological Level 33%
  • Film 33%
  10 Citations (SciVal)

  303 Downloads (Pure)

• Low torque levels can initiate a removal of the passivation layer and cause fretting in modular hip stems

  Jauch, S. Y., Coles, L. G., Ng, L. V., Miles, A. W. & Gill, H. S., Sept 2014, In: Medical Engineering & Physics . 36, 9, p. 1140-1146

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fretting 100%
  • Axial Load 100%
  • Passivation Layer 100%
  • Prosthesis 66%
  • Implant 33%
  27 Citations (SciVal)

  371 Downloads (Pure)

• Six degrees of freedom assessment of micromotion of press-fit acetabular cups should be carried out under dynamic hip motion

  Crosnier, E., Scrivens, D., Keogh, P. & Miles, A. W., 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  64 Downloads (Pure)

• Spinal muscle activity in simulated rugby union scrummaging is affected by different engagement conditions

  Stone, B., Cazzola, D., McGuigan, P., Holsgrove, T., Gill, R., Gheduzzi, S., Miles, T., Stokes, K., Trewartha, G. & Preatoni, E., 15 Sept 2014, Book of Abstract of the 10th Bath Biomechanics Symposium: Current Issues and Future Opportunities in Orthopaedic Research.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

  File

  • Muscle Contraction 100%
  • Rigidity 100%
  • Spine Injury 100%
  • Body Position 50%
  • Neck 50%
  325 Downloads (Pure)

• Strong correlation between the morphology of the proximal femur and the geometry of the distal femoral trochlea

  Wright, S. J., Boymans, T. A. E. J., Grimm, B., Miles, A. W. & Kessler, O., 1 Dec 2014, In: Knee Surgery, Sports Traumatology, Arthroscopy. 22, 12, p. 2900-2910 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Proximal Femur 100%
  • Total Knee Arthroplasty 100%
  • Arthroplasty 100%
  • Osteoarthritis 100%
  • Knee Replacement 50%
  32 Citations (SciVal)

  408 Downloads (Pure)

• The development and validation of specimen-specific finite element models of the spine to investigate sporting injury mechanisms

  Holsgrove, T. P., Cazzola, D., Gheduzzi, S., Miles, T., Preatoni, E., Stokes, K., Trewartha, G. & Gill, R., Jul 2014, Abstract Book of the 7th World Congress of Biomechanics. Boston, U.S. A., 2 p.

  Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

• The development of a dynamic, six-axis spine simulator

  Holsgrove, T. P., Gheduzzi, S., Gill, H. S. & Miles, A. W., 1 Jul 2014, In: The Spine Journal. 14, 7, p. 1308-1317 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Physiological Condition 100%
  • Stiffness Matrix 100%
  • Biomechanics 50%
  • Frequency Response 50%
  • Greater Effect 50%
  17 Citations (SciVal)

  294 Downloads (Pure)

• The Effect of Femoral Rotation During Total Knee Arthroplasty on Patellofemoral Contact Characteristics

  Coles, L. G., Gheduzzi, S. & Miles, A. W., 8 Jul 2014.

  Research output: Contribution to conference › Paper › peer-review

  File

  • Joints (Structural Components) 100%
  • Motion 100%
  • Tension 100%
  • Joint Mobility 100%
  • Total Knee Arthroplasty 100%
  95 Downloads (Pure)

• Volar Locking Plates for Distal Radius Fractures: A Biomechanical Study Investigating Optimal Locking Screw Trajectory

  Avis, D., Wright, S., Forder, J., Miles, A. W. & Holsgrove, T. P., Jun 2014.

  Research output: Contribution to conference › Paper › peer-review

  File
  95 Downloads (Pure)