Research output per year
Research output per year
- 15 results
Search results
-
2020
A novel air and EGR emulation facility for the optimisation of the powertrain architecture
Orchard, S., Ozturk, U., Evans, N., Duda, T., Chappell, E. & Burke, R., 1 Jan 2020, ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019. U. S. A.: American Society of Mechanical Engineers (ASME), 8 p. ICEF2019-7166, V001T05A003. (ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
2019
Investigation of a Combined Inverted Brayton and Rankine Cycle
Kennedy, I., Duda, T., Liu, Z., Ceen, B., Jones, A. & Copeland, C., 8 Feb 2019, (Acceptance date) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90767Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
Investigation of a Combined Inverted Brayton and Rankine Cycle
Kennedy, I., Duda, T., Liu, Z., Ceen, B., Jones, A. & Copeland, C., 1 Dec 2019, In: Journal of Engineering for Gas Turbines and Power. 141, 12, p. 1-11 11 p., 121009.Research output: Contribution to journal › Article › peer-review
2 Citations (SciVal) -
2018
Compressor pressure investigation of surge onset at steady and unsteady operations of an automotive turbocharger
Avola, C., Duda, T., Burke, R. & Copeland, C., May 2018, IMECHE Turbochargers and Turbocharging 2018. Curran Associates, Inc., p. 503-513Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
Design of an Air-cooled Radial Turbine Part 1: Computational Modelling
Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., 30 Aug 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, p. 1-13 1 p. GT2018-76378. (Proceedings of the ASME Turbo Expo; vol. 8).Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
19 Citations (SciVal) -
Design of an Air-Cooled Radial Turbine Part 2: Part 2 Experimental Measurements of Heat Transfer
Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, Vol. 8. p. 1-12 12 p. GT2018-76384Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
17 Citations (SciVal) -
Performance of the automotive turbocharger compressor with various CO 2-air mixtures
Duda, T. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. Vol. 8. 9 p. GT2018-75747Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
-
2017
Compressor surge for fully and semi fluctuating flows in automotive turbochargers
Avola, C., Copeland, C., Duda, T. & Burke, R., 18 Jan 2017.Research output: Contribution to conference › Paper › peer-review
Open Access -
2016
Lumped capacitance and three-dimensional computational fluid dynamics conjugate heat transfer modelling of an automotive turbocharger
Burke, R. D., Copeland, C. D., Duda, T. & Reyes Belmonte, M., Sept 2016, In: Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 138, 9, 092602.Research output: Contribution to journal › Article › peer-review
18 Citations (SciVal) -
2015
Investigation of Mechanical Loss Components and Heat Transfer in an Axial-Flux PM Machine
Wrobel, R., Vainel, G., Copeland, C., Duda, T., Staton, D. & Mellor, P., 31 Aug 2015, In: IEEE Transactions on Industry Applications. 51, 4, p. 3000 - 3011 11 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile59 Citations (SciVal)447 Downloads (Pure) -
Lumped capacitance and 3D CFD conjugate heat transfer modelling of an automotive turbocharger
Burke, R., Copeland, C., Duda, T. & Reyes Belmonte, M. A., 2015, Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, 2015. Volume 8 - Microturbines, Turbochargers and Small Turbomachines; Steam Turbines . American Society of Mechanical Engineers (ASME), p. V008T23A004 11 p.Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
6 Citations (SciVal) -
Review of turbocharger mapping and 1D modelling inaccuracies with specific focus on two-stage systems
Avola, C., Copeland, C., Duda, T., Burke, R., Akehurst, S. & Brace, C., 2 Jul 2015, SAE 12th International Conference on Engines & Vehicles (ICE), 2015. SAE International, 18 p. 2015-24-2523Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
7 Citations (SciVal) -
2014
Experimental and analytical investigation of implementing a ball bearing turbocharger on a production diesel engine
Zhang, N., Burke, R. D., Duda, T., Brace, C. J., Akehurst, S., Capon, G., Dowell, P. G. & Davies, P., 13 May 2014.Research output: Contribution to conference › Paper › peer-review
2 Citations (SciVal) -
Investigation into the assumptions for lumped capacitance modelling of turbocharger heat transfer
Burke, R. D., Copeland, C. D. & Duda, T., 15 May 2014.Research output: Contribution to conference › Paper
File320 Downloads (Pure) -
2013
Investigation of mechanical loss and heat transfer in an axial-flux PM machine
Wrobel, R., Vainel, G., Copeland, C., Duda, T., Staton, D. & Mellor, P., 2013, Energy Conversion Congress and Exposition (ECCE), 2013 IEEE . p. 4372-4379Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
Open AccessFile13 Citations (SciVal)331 Downloads (Pure)