If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2020

A novel air and EGR emulation facility for the optimisation of the powertrain architecture

Orchard, S., Ozturk, U., Evans, N., Duda, T., Chappell, E. & Burke, R., 1 Jan 2020, ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019. American Society of Mechanical Engineers (ASME), 8 p. ICEF2019-7166, V001T05A003. (ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

Analysis of the opportunities and trade-offs for an 48V electrified air path

Liu, Y., Vijayakumar, R. & Burke, R., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T05A007 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)

Design of an advanced air path test stand for steady and transient evaluation

Vijayakumar, R., Burke, R., Liu, Y. & Turner, J. W. G., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T07A004 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
2018

Accuracy of diesel engine combustion metrics over the full range of engine operating conditions

Dowell, P. G., Burke, R. D. & Akehurst, S., 1 Jan 2018, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development. American Society of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressor pressure investigation of surge onset at steady and unsteady operations of an automotive turbocharger

Avola, C., Duda, T., Burke, R. & Copeland, C., May 2018, IMECHE Turbochargers and Turbocharging 2018. Curran Associates, Inc., p. 503-513

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Air-fuel-ratio control of engine system with unknown input observer

Na, J., Herrmann, G., Rames, C., Burke, R. & Brace, C., 7 Nov 2016, 2016 UKACC International Conference on Control, UKACC Control 2016. IEEE, 7737647

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Analysis of a Diesel Passenger Car Behavior On-road and over Certification Duty Cycles

Chappell, E., Burke, R., Lu, P., Gee, M. & Williams, R., Oct 2016, SAE Fuels and Lubes 2016. 2016-01-2328

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An improved rate of heat release model for modern high speed diesel engines

Dowell, P. G., Akehurst, S. & Burke, R. D., 1 Jan 2016, ASME 2016 Internal Combustion Engine Fall Technical Conference, ICEF 2016. U. S. A.: American Society of Mechanical Engineers (ASME), p. V001T05a003 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Numerical investigation of two-stage turbocharging systems performance

Avola, C., Copeland, C., Burke, R. & Brace, C., 9 Oct 2016, ASME 2016 Internal Combustion Engine Fall Technical Conference, ICEF 2016. American Society of Mechanical Engineers (ASME), ICEF2016-9449

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Preliminary DoE analysis and control of mapping procedure for a turbocharger on an engine gas stand

Avola, C., Dimitriou, P., Burke, R. & Copeland, C., 2016, ASME Turbo Expo 2016. GT2016-56466

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2015

A Numerical Study of the benefits of electrically assisted boosting systems

Burke, R., 8 Nov 2015, A Numerical Study of the benefits of electrically assisted boosting systems.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lumped capacitance and 3D CFD conjugate heat transfer modelling of an automotive turbocharger

Burke, R., Copeland, C., Duda, T. & Reyes Belmonte, M. A., 2015, Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, 2015. Volume 8 - Microturbines, Turbochargers and Small Turbomachines; Steam Turbines . American Society of Mechanical Engineers (ASME), p. V008T23A004 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Predicting the nitrogen oxides emissions of a diesel engine using neural networks

Zhang, Q., Pennycott, A., Burke, R., Akehurst, S. & Brace, C., 14 Apr 2015, SAE Technical Papers. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Review of turbocharger mapping and 1D modelling inaccuracies with specific focus on two-stage systems

Avola, C., Copeland, C., Duda, T., Burke, R., Akehurst, S. & Brace, C., 2 Jul 2015, SAE 12th International Conference on Engines & Vehicles (ICE), 2015. SAE International, 18 p. 2015-24-2523

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)
2014

Dynamic identification of thermodynamic parameters for turbocharger compressor models

Burke, R., Olmeda, P. & Serrano, J. R., 2014, ASME 2014 Internal Combustion Engine Division Fall Technical Conference (ICEF). American Society of Mechanical Engineers (ASME), Vol. 2. 12 p. V002T06A006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
1 Citation (Scopus)
61 Downloads (Pure)
2013

Control strategy study of the series sequential turbocharging using 1-D simulation

Zhang, Q., Brace, C., Akehurst, S., Burke, R., Capon, G., Smith, L., Garrett, S. & Zhang, K., 2013, ASME Turbo Expo, 2013: Turbine Technical Conference and Exposition. San Antonio, U. S. A.: ASME, Vol. 5A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2011

Practical approach to thermo-dynamic modelling of diesel engine emissions

Burke, R., Fath, B., Akehurst, S., Brace, C., Baumann, W. & Wascheck, R., 2011, Design of Experiments (DoE) in Engine Development,( 6th ed.). Berlin, Germany: Expert Verlag, p. 88-103

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

A design of experiments approach to the control of chassis dynamometer testing error

Burke, R., Brace, C. & Moffa, J., 2009, Design of Experiments in Engine Development. 5th ed. Renningen, Germany: Expert Verlag, p. 214-223

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
15 Downloads (Pure)