If you made any changes in Pure these will be visible here soon.

Research Output

Abstract

Towards Next-Generation Automotive Exhaust Gas Sensors

Wales, D., Ting, V., Burke, R., Burrows, A., Edler, K. & Mintova, S., 2014, (Unpublished).

Research output: Contribution to conferenceAbstract

Article
Open Access
File
34 Downloads (Pure)
Open Access
File
1 Downloads (Pure)

Air-Fuel Ratio Control of Spark Ignition Engines With Unknown System Dynamics Estimator: Theory and Experiments

Na, J., Chen, A. S., Huang, Y., Aggarwal, A., Lewis, A., Burke, R., Brace, C. & Hermann, G., 9 Dec 2019, In : IEEE Transactions on Control Systems Technology. p. 1-8 8 p.

Research output: Contribution to journalArticle

Open Access
File
3 Downloads (Pure)

A Lumped Parameter Thermal Model for Single Sided AFPM Machines with Experimental Validation

Burke, R., Giedymin, A., Wu, Z., Chuan, H., Bourne, N. & Hawley, G., 28 May 2020, In : IEEE Transactions on Transportation Electrification. p. 1-1 1 p.

Research output: Contribution to journalArticle

Open Access
File
16 Citations (Scopus)

Analysis of a Diesel Passenger Car Behavior On-Road and over Certification Duty Cycles

Chappell, E., Burke, R., Lu, P., Gee, M. & Williams, R., 17 Oct 2016, In : SAE International Journal of Engines. 9, 4, 2016-01-2328.

Research output: Contribution to journalArticle

4 Citations (Scopus)
1 Citation (Scopus)
Open Access
File
8 Downloads (Pure)

A novel use of multivariate statistics to diagnose test-to-test variation in complex measurement systems

Burke, R. D., Burke, K. A., Chappell, E. C., Gee, M. & Williams, R., 1 Dec 2018, In : Measurement. 130, p. 467-481 15 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
25 Downloads (Pure)

A real-time capable mixing controlled combustion model for highly diluted conditions

Dowell, P., Akehurst, S. & Burke, R., 15 Aug 2017, In : Energy. 133, p. 1035-1049 15 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
156 Downloads (Pure)

A Research on Waste-Gated Turbine Performance Under Unsteady Flow Condition

Deng, Q., Burke, R., Zhang, Q. & Pohorelsky, L., 1 Jun 2017, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 139, 6, p. 1-12 12 p., 062603.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
7 Downloads (Pure)
Open Access
File
1 Citation (Scopus)
53 Downloads (Pure)

A virtual engine laboratory for teaching powertrain engineering

Burke, R. D., De Jonge, N., Avola, C. & Forte, B., Nov 2017, In : Computer Applications in Engineering Education.

Research output: Contribution to journalArticle

Open Access
File
9 Citations (Scopus)
154 Downloads (Pure)
Open Access
File
1 Citation (Scopus)
139 Downloads (Pure)
Open Access
File
10 Citations (Scopus)
136 Downloads (Pure)

Dynamic Identification of thermodynamic parameters for Turbocharger Compressor Models

Burke, R., Olmeda, P. & Serrano, J. R., 1 Oct 2015, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 137, 10, p. 1 - 10 10 p., GTP-15-1055.

Research output: Contribution to journalArticle

Open Access
File
10 Downloads (Pure)
Open Access
File
12 Citations (Scopus)
146 Downloads (Pure)

Effect of inter-stage phenomena on the performance prediction of two-stage turbocharging systems

Avola, C., Copeland, C., Burke, R. & Brace, C., 1 Sep 2017, In : Energy. 134, p. 743-756

Research output: Contribution to journalArticle

Open Access
File
9 Citations (Scopus)
152 Downloads (Pure)

Electric Turbocharging for Energy Regeneration and Increased Efficiency at Real Driving Conditions

Dimitriou, P., Burke, R., Zhang, Q., Copeland, C. & Stoffels, H., 1 Apr 2017, In : Applied Sciences. 7, 4, 25 p., 350.

Research output: Contribution to journalArticle

Open Access
12 Citations (Scopus)

Gas sensing using porous materials for automotive applications

Wales, D. J., Grand, J., Ting, V. P., Burke, R. D., Edler, K. J., Bowen, C. R., Mintova, S. & Burrows, A. D., 7 Jul 2015, In : Chemical Society Reviews. 44, 13, p. 4290-4321

Research output: Contribution to journalArticle

Open Access
File
237 Citations (Scopus)
169 Downloads (Pure)

Heat transfer in turbocharger turbines under steady, pulsating and transient conditions

Burke, R. D., Vagg, C. R. M., Chalet, D. & Chesse, P., 1 Apr 2015, In : International Journal of Heat and Fluid Flow. 52, p. 185-197 13 p.

Research output: Contribution to journalArticle

Open Access
File
31 Citations (Scopus)
244 Downloads (Pure)
26 Citations (Scopus)
141 Downloads (Pure)

Investigation into the benefits of reduced oil flows in internal combustion engines

Burke, R. D., Brace, C. J., Stark, R. & Pegg, I., 1 Jun 2015, In : International Journal of Engine Research. 16, 4, p. 503-517 15 p.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)
182 Downloads (Pure)
7 Citations (Scopus)
Open Access
File
23 Citations (Scopus)
67 Downloads (Pure)
Open Access
File
22 Citations (Scopus)
139 Downloads (Pure)
Open Access
File
7 Citations (Scopus)
119 Downloads (Pure)

The benefits of a mid-route exhaust gas recirculation system for two-stage boosted engines

Dimitriou, P., Turner, J., Burke, R. & Copeland, C., 1 Jun 2018, In : International Journal of Engine Research. 19, 5, p. 553-569 17 p.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)
141 Downloads (Pure)

Vehicle Engine Torque Estimation via Unknown Input Observer and Adaptive Parameter Estimation

Na, J., Chen, A., Herrmann, G., Burke, R. & Brace, C., 1 Jan 2018, In : IEEE Transactions on Vehicular Technology. 67, 1, p. 409-422 14 p., 8010342.

Research output: Contribution to journalArticle

Open Access
File
46 Citations (Scopus)
71 Downloads (Pure)
Book
Conference article

Hybrid Powertrain Technology Assessment through an Integrated Simulation Approach

Dalby, J., Fiquet, F., Ward, A., Stoffels, H., Burke, R., Zaldua-Moreno, N., Neveling, M., Liu, Y. & Pace, L., 9 Sep 2019, In : SAE Technical Papers. 2019-September

Research output: Contribution to journalConference article

File
6 Downloads (Pure)

Inner-Insulated Turbocharger Technology to Reduce Emissions and Fuel Consumption from Modern Engines

Burke, R., Liu, Y., Vijayakumar, R., Werner, J. & Dalby, J., 9 Sep 2019, In : SAE Technical Papers. 2019-September

Research output: Contribution to journalConference article

Open Access
File
5 Downloads (Pure)

Study on the Effects of EGR Supply Configuration on Cylinder-to-Cylinder Dispersion and Engine Performance Using 1D-3D Co-Simulation

Dimitriou, P., Burke, R., Copeland, C. D. & Akehurst, S., 17 Nov 2015, In : SAE Technical Papers. 2015

Research output: Contribution to journalConference article

4 Citations (Scopus)
Conference contribution

Accuracy of diesel engine combustion metrics over the full range of engine operating conditions

Dowell, P. G., Burke, R. D. & Akehurst, S., 1 Jan 2018, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development. American Society of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A comparative study on different cooling topologies for axial flux permanent magnet machine

Chuan, H., Burke, R. & Wu, Z., Oct 2019, 2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings. IEEE, 8952185. (2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A design of experiments approach to the control of chassis dynamometer testing error

Burke, R., Brace, C. & Moffa, J., 2009, Design of Experiments in Engine Development. 5th ed. Renningen, Germany: Expert Verlag, p. 214-223

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
15 Downloads (Pure)

Air-fuel-ratio control of engine system with unknown input observer

Na, J., Herrmann, G., Rames, C., Burke, R. & Brace, C., 7 Nov 2016, 2016 UKACC International Conference on Control, UKACC Control 2016. IEEE, 7737647

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Analysis of a Diesel Passenger Car Behavior On-road and over Certification Duty Cycles

Chappell, E., Burke, R., Lu, P., Gee, M. & Williams, R., Oct 2016, SAE Fuels and Lubes 2016. 2016-01-2328

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of the opportunities and trade-offs for an 48V electrified air path

Liu, Y., Vijayakumar, R. & Burke, R., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T05A007 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)
10 Downloads (Pure)

An improved rate of heat release model for modern high speed diesel engines

Dowell, P. G., Akehurst, S. & Burke, R. D., 1 Jan 2016, ASME 2016 Internal Combustion Engine Fall Technical Conference, ICEF 2016. U. S. A.: American Society of Mechanical Engineers (ASME), p. V001T05a003 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A novel air and EGR emulation facility for the optimisation of the powertrain architecture

Orchard, S., Ozturk, U., Evans, N., Duda, T., Chappell, E. & Burke, R., 1 Jan 2020, ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019. U. S. A.: American Society of Mechanical Engineers (ASME), 8 p. ICEF2019-7166, V001T05A003. (ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Numerical Study of the benefits of electrically assisted boosting systems

Burke, R., 8 Nov 2015, A Numerical Study of the benefits of electrically assisted boosting systems.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressor pressure investigation of surge onset at steady and unsteady operations of an automotive turbocharger

Avola, C., Duda, T., Burke, R. & Copeland, C., May 2018, IMECHE Turbochargers and Turbocharging 2018. Curran Associates, Inc., p. 503-513

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Control strategy study of the series sequential turbocharging using 1-D simulation

Zhang, Q., Brace, C., Akehurst, S., Burke, R., Capon, G., Smith, L., Garrett, S. & Zhang, K., 2013, ASME Turbo Expo, 2013: Turbine Technical Conference and Exposition. San Antonio, U. S. A.: ASME, Vol. 5A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Design of an advanced air path test stand for steady and transient evaluation

Vijayakumar, R., Burke, R., Liu, Y. & Turner, J. W. G., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T07A004 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
5 Downloads (Pure)

Dynamic identification of thermodynamic parameters for turbocharger compressor models

Burke, R., Olmeda, P. & Serrano, J. R., 2014, ASME 2014 Internal Combustion Engine Division Fall Technical Conference (ICEF). American Society of Mechanical Engineers (ASME), Vol. 2. 12 p. V002T06A006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
1 Citation (Scopus)
64 Downloads (Pure)

Lumped capacitance and 3D CFD conjugate heat transfer modelling of an automotive turbocharger

Burke, R., Copeland, C., Duda, T. & Reyes Belmonte, M. A., 2015, Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, 2015. Volume 8 - Microturbines, Turbochargers and Small Turbomachines; Steam Turbines . American Society of Mechanical Engineers (ASME), p. V008T23A004 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)