1994 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020
File
2 Downloads (Pure)

Managing the Performance of Asset Acquisition and Operation with Decision Support Tools

Lattanzio, S., Newnes, L., McManus, M. & Dunkley, D., 9 Jun 2020, In : CivilEng. 1

Research output: Contribution to journalArticle

Open Access
File
2 Downloads (Pure)

Towards a Practical Approach for TE Education: A Pilot Study at the University of Bath

Lattanzio, S., Newnes, L., Sajdakova, J., Burke, R. & Parry, G., 1 Jun 2020, (Acceptance date).

Research output: Contribution to conferencePaper

Transdisciplinarity Within the Academic Engineering Literature

Lattanzio, S., Carey, E., Hultin, A., Imani Asrai, R., McManus, M., Mogles, N., Parry, G. & Newnes, L., 31 Jul 2020, In : International Journal of Agile Systems and Management. 13, 2, p. 213-232

Research output: Contribution to journalArticle

2019
1 Citation (Scopus)

Stakeholder perspectives on the cost requirements of Small Modular Reactors

Agar, A. S., Goodfellow, M. J., Newnes, L. B. & Goh, Y. M., 1 Apr 2019, In : Progress in Nuclear Energy. 112, p. 51-62 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

When and where is transdisciplinary engineering applied in projects? A case study

Kharlamov, A., Parry, G. & Newnes, L., 7 Oct 2019, Transdisciplinary Engineering for Complex Socio-technical Systems - Proceedings of the 26th ISTE International Conference on Transdisciplinary Engineering. Hiekata, K., Moser, B., Inoue, M., Stjepandic, J. & Wognum, N. (eds.). IOS Press BV, p. 12-21 10 p. (Advances in Transdisciplinary Engineering; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Expected accuracy range of cost estimates for small modular reactors at the early concept design stage

Agar, A. S., Fry, A. J., Goodfellow, M. J., Goh, Y. M. & Newnes, L. B., 1 Jan 2018, Student Paper Competition: Volume 9. American Society of Mechanical Engineers (ASME), p. V009T16A055 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigating the evolving knowledge structures around new product development

Gopsill, J., Shakspeare, P., Snider, C., Newnes, L. & Hicks, B., 2 Jul 2018.

Research output: Contribution to conferencePaper

Open Access
File
51 Downloads (Pure)

Investigating the evolving knowledge structures in new technology development

Gopsill, J. A., Shakespeare, P., Snider, C. M., Newnes, L. & Hicks, B. J., 1 Jan 2018, Product Lifecycle Management to Support Industry 4.0 - 15th IFIP WG 5.1 International Conference, PLM 2018, Proceedings. Ríos, J., Noël, F., Chiabert, P. & Bouras, A. (eds.). New York, U. S. A.: Springer New York, p. 523-533 11 p. (IFIP Advances in Information and Communication Technology; vol. 540).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
2 Citations (Scopus)
157 Downloads (Pure)

Uncertainty perception in bidding for Product-Service Systems under competition

Kreye, M. E., Goh, Y. M. & Newnes, L. B., 1 Jan 2018, In : Journal of Purchasing and Supply Management. 24, 1, p. 31-40 10 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
9 Downloads (Pure)
2017

Catchment Metabolism: Integrating Natural Capital in the Asset Management portfolio of the Water Sector

Papacharalampou, C., McManus, M. & Newnes, L., 20 Jan 2017, In : Journal of Cleaner Production. 142, Part 4, p. 1994-2005

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
130 Downloads (Pure)

Editorial

Newnes, L., 1 Jan 2017, In : Production and Manufacturing Research. 5, 1, p. 40-41 2 p.

Research output: Contribution to journalEditorial

1 Citation (Scopus)

Interdisciplinary life cycle data analysis within a knowledge-based system for product cost estimation

Altavilla, S., Montagna, F. & Newnes, L., Aug 2017, In : Proceedings of the International Conference on Engineering Design (ICED 2017). 5, DS87-5, p. 375-384 10 p.

Research output: Contribution to journalArticle

Learning to predict characteristics for engineering service projects

Shi, L., Newnes, L., Culley, S. & Allen, B., 1 Aug 2017, In : Artificial Intelligence for Engineering Design, Analysis and Manufacturing. 31, 3, p. 313-326

Research output: Contribution to journalArticle

2 Citations (Scopus)

Make the right choice

Lattanzio, S., Newnes, L. & McManus, M., 1 Nov 2017, Assets, the magazine for members of the IAM, p. 08 1 p.

Research output: Contribution to specialist publicationArticle

Mapping a product-service-system delivering defence avionics availability

Settanni, E., Thenent, N. E., Newnes, L. B., Parry, G. & Goh, Y. M., Apr 2017, In : International Journal of Production Economics. 186, p. 21-32 12 p.

Research output: Contribution to journalArticle

Open Access
10 Citations (Scopus)

Visual support for complex repair operations in a global aerospace company

Joel-Edgar, S., Shi, L., Emanuel, L., Jones, S., Watts, L., Newnes, L., Payne, S., Hicks, B. & Culley, S., 2017, Visual Analytics for Management: Translational Science and Applications in Practice. Bendoly, E. & Clark, S. (eds.). Abingdon: Routledge, p. 100-112 8

Research output: Chapter in Book/Report/Conference proceedingChapter

2016

A case study in estimating avionics availability from field reliability data

Settanni, E., Newnes, L. B., Thenent, N. E., Bumblauskas, D., Parry, G. & Goh, Y. M., Jun 2016, In : Quality and Reliability Engineering International. 32, 4, p. 1553-1580

Research output: Contribution to journalArticle

File
6 Citations (Scopus)
143 Downloads (Pure)

Adapting the SHEL model in investigating industrial maintenance

Metso, L., Marttonnen, S., Thenent, N. & Newnes, L., 14 Mar 2016, In : Journal of Quality in Maintenance Engineering. 22, 1, p. 62-80

Research output: Contribution to journalArticle

Open Access
File
7 Citations (Scopus)
163 Downloads (Pure)

Balancing global customer needs and profitability using a novel business model for new model programmes in the automotive industry

Mills, R., Newnes, L. B. & Nassehi, A., 1 Sep 2016, In : Procedia CIRP. 52, p. 56-61 6 p.

Research output: Contribution to journalArticle

Open Access

Combating Decision Support Tool Performance Decay

Lattanzio, S., Newnes, L., McManus, M. & Dunkley, D., 20 Jun 2016, (Unpublished).

Research output: Contribution to conferencePoster

File
40 Downloads (Pure)

Data-Driven modelling: Towards interpreting and understanding process evolution of In-Service engineering projects

Shi, L., Newnes, L., Culley, S., Gopsill, J. & Sinder, C., 2016, Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Revised Selected Papers. Springer New York, Vol. 467. p. 291-300 10 p. (IFIP Advances in Information and Communication Technology; vol. 467).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Life cycle decision support tools: The use of quality management techniques in combating decision tool 'performance decay'

Lattanzio, S., Newnes, L., McManus, M. & Dunkley, D., 1 Jan 2016, 21st Design for Manufacturing and the Life Cycle Conference: 10th International Conference on Micro- and Nanosystems. U. S. A.: American Society of Mechanical Engineers (ASME), Vol. 4. p. V004Y05A034 DETC2016-59888

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structuring Integrated Asset Management in the Water Sector

Papacharalampou, C., McManus, M. & Newnes, L., 30 Mar 2016. 2 p.

Research output: Contribution to conferenceOther

Open Access
File
40 Downloads (Pure)
2015

Addressing uncertainty in estimating the cost for a product-service-system delivering availability: epistemology and ontology

Goh, Y. M., Newnes, L., Settanni, E., Thenent, N. & Parry, G., 2015, Ontology Modeling in Physical Asset Integrity Management: Addressing Uncertainty in Estimating the Cost for a Product-Service-System Delivering Availability: Epistemology and Ontology. Ibrahimipour, V. & Yacout, S. (eds.). London, U. K.: Springer, p. 199-220 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

3 Citations (Scopus)
5 Citations (Scopus)
Open Access
File
90 Downloads (Pure)

Identifying and Visualising KPIs for Collaborative Engineering Projects: a Knowledge Based Approach

Shi, L., Newnes, L., Culley, S., Gopsill, J., Jones, S. & Snider, C., 27 Jul 2015.

Research output: Contribution to conferencePaper

Open Access
File
3 Citations (Scopus)
39 Downloads (Pure)

Process Reconstruction and Visualisation for Collaborative Engineering Projects

Shi, L., Newnes, L., Culley, S. & Sinder, C., 2015.

Research output: Contribution to conferencePaper

Thinking Catchments: a holistic approach to asset management in the water sector

Papacharalampou, C., McManus, M. & Newnes, L., 28 Apr 2015, p. 184-198. 14 p.

Research output: Contribution to conferencePaper

Open Access
File
64 Downloads (Pure)

To cost an elephant: an exploratory survey on cost estimating practice in the light of product-service-systems

Settanni, E., Thenent, N. E., Newnes, L. B., Parry, G. & Goh, Y. M., 2015, In : Journal of Cost Analysis and Parametrics. 8, 1, p. 1-22 22 p.

Research output: Contribution to journalArticle

File
54 Downloads (Pure)

Towards cleaner production: a roadmap for predicting product end-of-life costs at early design concept

Cheung, W. M., Marsh, R., Griffin, P. W., Newnes, L. B., Mileham, A. R. & Lanham, J. D., 15 Jan 2015, In : Journal of Cleaner Production. 87, p. 431-441

Research output: Contribution to journalArticle

Open Access
File
15 Citations (Scopus)
142 Downloads (Pure)
2014
4 Citations (Scopus)

A through-life costing methodology for use in product-service-systems

Settanni, E., Newnes, L. B., Thenent, N. E., Parry, G. & Goh, Y. M., 1 Jul 2014, In : International Journal of Production Economics. 153, p. 161-177 17 p.

Research output: Contribution to journalArticle

Open Access
File
54 Citations (Scopus)
26 Downloads (Pure)

Cutting cost in service systems: are you running with scissors?

Thenent, N., Settanni, E., Parry, G., Goh, Y. M. & Newnes, L., Aug 2014, In : Strategic Change. 23, 5-6, p. 341-357 16 p.

Research output: Contribution to journalArticle

File
116 Downloads (Pure)

The renewable energy directive and cereal residues

Whittaker, C., Borrion, A., Newnes, L. & McManus, M., Jun 2014, In : Applied Energy. 122, p. 207-215 9 p.

Research output: Contribution to journalArticle

File
16 Citations (Scopus)
143 Downloads (Pure)

Towards identifying patterns in engineering documents to aid project planning

Shi, L., Gopsill, J., Sinder, C., Jones, S., Newnes, L. & Culley, S., 2014, p. 1873-1882.

Research output: Contribution to conferencePaper

File
4 Citations (Scopus)
33 Downloads (Pure)

Uncertainty in competitive bidding: A framework for product-service systems

Kreye, M. E., Newnes, L. B. & Goh, Y-M., 1 Apr 2014, In : Production Planning and Control. 25, 6, p. 462-477 16 p.

Research output: Contribution to journalArticle

Open Access
File
25 Citations (Scopus)
155 Downloads (Pure)
2013

Information availability at the competitive bidding stage for service contracts

Kreye, M., Newnes, L. B. & Goh, Y-M., 6 Sep 2013, In : Journal of Manufacturing Technology Management. 24, 7, p. 976-997 21 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Optimising performance and cost at the early design stages

Saravi, M., Newnes, L. & Mileham, T., Jul 2013, In : International Journal of Engineering and Technology Innovation. 3, 3, p. 214-228 15 p.

Research output: Contribution to journalArticle

STEP-NC compliant manufacturing cost estimation system for CNC milled part component

Debode, A. B. O., Nassehi, A., Newnes, L. B. & Newman, S. T., 2013, Proceedings of the 37th International MATADOR 2012 Conference. Hinduja, S. & Li, L. (eds.). Springer, p. 53-56

Research output: Chapter in Book/Report/Conference proceedingChapter

2 Citations (Scopus)

Supporting multiple engineering viewpoints in computer-aided design using ontology-based annotations

Li, C. L., McMahon, C. & Newnes, L., 1 Jan 2013, Proceedings of the International Conference on Engineering Design, ICED. Vol. 6 DS75-06. p. 249-258 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

3 Citations (Scopus)

System modeling: A foundation for costing through-life availability provision

Settanni, E., Thenent, N. E. & Newnes, L. B., 1 Jan 2013, Product Lifecycle Management for Society - 10th IFIPWG 5.1 International Conference, PLM 2013, Proceedings. Bernard, A., Dutta, D. & Rivest, L. (eds.). New York, U. S. A.: Springer New York, p. 48-57 10 p. (IFIP Advances in Information and Communication Technology; vol. 409).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)
5 Citations (Scopus)
2012

Approaches to displaying information to assist decisions under uncertainty

Kreye, M. E., Goh, Y. M., Newnes, L. B. & Goodwin, P., Dec 2012, In : Omega-International Journal of Management Science. 40, 6, p. 682-692 11 p.

Research output: Contribution to journalArticle

Open Access
File
38 Citations (Scopus)
145 Downloads (Pure)

Balancing function and cost of orthopaedic implants: KTA007

Newnes, L. B., 2012

Research output: Non-textual formWeb publication/site

Cost engineering for manufacturing: Current and future research

Xu, Y., Elgh, F., Erkoyuncu, J. A., Bankole, O., Goh, Y., Cheung, W. M., Baguley, P., Wang, Q., Arundachawat, P., Shehab, E., Newnes, L. & Roy, R., 2012, In : International Journal of Computer Integrated Manufacturing. 25, 4-5, p. 300-314 15 p.

Research output: Contribution to journalArticle

44 Citations (Scopus)