Glen Mullineux

2022

C¹ and G¹ continuous rational motions using a conformal geometric algebra

Cross, B., Cripps, R. J. & Mullineux, G., 1 Oct 2022, In: Journal of Computational and Applied Mathematics. 412, 114280.

Research output: Contribution to journal › Article › peer-review

Open Access

File

1 Citation (SciVal)

193 Downloads (Pure)

2018

Free-form additive motions using conformal geometric algebra

Hunt, M., Mullineux, G., Cripps, R. J. & Cross, B., 1 May 2018, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 232, 9, p. 1560-1571 12 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (SciVal)

G-codes and free-form motions

Cross, B., Cripps, R. J., Matthews, J. & Mullineux, G., 2018, Proceedings of Twelfth International Symposium on Tools and Methods of Competitive Engineering -TMCE 2018. Horvath, I., Suarez Rivero, J. P. & Hernandez Castellano, P. M. (eds.). Delft, Netherlands: Delft University of Technology, p. 593-602

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Thermal compensation using the hybrid metrology approach compared to traditional scaling: DET 2016 Special Edition

Ross-Pinnock, D. & Mullineux, G., 1 Nov 2018, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 232, 13, p. 2364-2374

Research output: Contribution to journal › Article › peer-review

Open Access

File

4 Citations (SciVal)

162 Downloads (Pure)

Types of free-form motion

Cross, B., Cripps, R. J. & Mullineux, G., 2018, Proceedings of Twelfth International Symposium on Tools and Methods of Competitive Engineering -TMCE 2018. Horvath, I., Suarez Rivero, J. P. & Hernandez Castellano, P. M. (eds.). Delft, Netherlands: Delft University of Technology, p. 671-680

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

2017

Absolute multilateration between spheres

Muelaner, J., Wadsworth, W., Azini, M., Mullineux, G., Hughes, B. & Reichold, A., 30 Apr 2017, In: Measurement Science and Technology. 28, 4, p. 1-11 11 p., 045005.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (SciVal)

22 Downloads (Pure)

Machinability of surfaces via motion analysis

Cripps, R. J., Cross, B., Mullineux, G. & Hunt, M., 2017, Mathematical Methods for Curves and Surfaces - 9th International Conference, MMCS 2016, Revised Selected Papers. Floater, M., Lyche, T., Mazure, M.-L., Morken, K. & Schumaker, L. L. (eds.). Cham, Switzerland: Springer Verlag, Vol. LNCS 10521. p. 74-95 22 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10521 ).

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

1 Citation (SciVal)

Singularities in five-axis machining: cause, effect and avoidance

Cripps, R. J., Cross, B., Hunt, M. & Mullineux, G., 31 May 2017, In: International Journal of Machine Tools and Manufacture. 116, p. 40-51 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

40 Citations (SciVal)

407 Downloads (Pure)

Thermal compensation for large volume metrology and structures

Yang, B., Ross-Pinnock, D., Muelaner, J. & Mullineux, G., 2017, In: International Journal of Metrology and Quality Engineering. 8, 21.

Research output: Contribution to journal › Article › peer-review

Open Access

File

7 Citations (SciVal)

176 Downloads (Pure)

Uncertainties in dimensional measurements due to thermal expansion

Muelaner, J. E., Ross-Pinnock, D., Mullineux, G. & Keogh, P. S., Jan 2017, Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. EUSPEN, p. 133-143 11 p.

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

2016

Characterizing isoclinic matrices and the Cayley factorization

Hunt, M., Mullineux, G., Cripps, R. J. & Cross, B., Nov 2016, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 230, 18, p. 3267-3273

Research output: Contribution to journal › Article › peer-review

1 Citation (SciVal)

Design for verification

Francis, A., Maropoulos, P. G., Mullineux, G. & Keogh, P. S., 16 Nov 2016, In: Procedia CIRP. 56, p. 61-66

Research output: Contribution to journal › Article › peer-review

Open Access

File

5 Citations (SciVal)

470 Downloads (Pure)

Point-Based Models For Compensation Of Thermal Effects In Dimensional Metrology

Mullineux, G., Ross-Pinnock, D. & Yang, B., May 2016, Tools and Methods of Competitive Engineering. Horvath, I., Pernot, J.-P. & Rusak, Z. (eds.). Delft University of Technology, p. 117-128

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Open Access

File

112 Downloads (Pure)

Smooth Tool Motions Through Precision Poses

Mullineux, G., Hunt, M., Cripps, R. J. & Cross, B., May 2016, Tools and Methods of Competitive Engineering. Horvath, I., Pernot, J.-P. & Rusak, Z. (eds.). Delft University of Technology, p. 551-562

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Open Access

File

131 Downloads (Pure)

Thermal Compensation of Photogrammetric Dimensional Measurements in Non-standard Anisothermal Environments

Ross-Pinnock, D. & Mullineux, G., 2016, Procedia CIRP: The 9th International Conference on Digital Enterprise Technology – Intelligent Manufacturing in the Knowledge Economy Era. Elsevier, Vol. 56. p. 416–421 6 p.

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Open Access

File

5 Citations (SciVal)

150 Downloads (Pure)

Using geometric algebra to represent and interpolate tool poses

Cripps, R. J. & Mullineux, G., 2016, In: International Journal of Computer Integrated Manufacturing. 29, 4, p. 406-423 19 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

7 Citations (SciVal)

263 Downloads (Pure)

2015

Coping with Poor Thermal Environments and Gravity in Multi-Component Assemblies

Yang, B., Ross-Pinnock, D., Mullineux, G., Muelaner, J., Hughes, B., Keogh, P. & Maropoulos, P., 2015, EPMC.

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Representing cutter tool paths using geometric algebra

Mullineux, G., Hunt, M., Cripps, R. & Cross, B., 2015, p. 1 - 6.

Research output: Contribution to conference › Paper › peer-review

Singularities and 5-axis machining

Cross, B., Cripps, R., Hunt, M. & Mullineux, G., Sept 2015, p. 45-50.

Research output: Contribution to conference › Paper › peer-review

File

108 Downloads (Pure)

2014

Design of free-form motions

Cripps, R. J. & Mullineux, G., May 2014, p. 275-284. 10 p.

Research output: Contribution to conference › Paper › peer-review

Mechanism synthesis: a comparison of adaptive and traditional approaches

Feldman, J., Hicks, B. & Mullineux, G., 2014, In: International Journal of Information Technology and Management. 13, 2/3, p. 216-241 26 p.

Research output: Contribution to journal › Article › peer-review

File

1 Citation (SciVal)

255 Downloads (Pure)

Modelling the string-bed of a tennis racquet using energy

Fu, Z., Valentine, R. M. & Mullineux, G., May 2014, p. 1413-1424. 12 p.

Research output: Contribution to conference › Paper › peer-review

2013

An empirical investigation into the influence of sealing crimp geometry and process settings on the seal integrity of traditional and biopolymer packaging materials

Matthews, J., Hicks, B., Mullineux, G., Leslie, J., Goodwin, J., Ogg, A. & Campbell, A., Oct 2013, In: Packaging Technology and Science. 26, 6, p. 355-371 17 p.

Research output: Contribution to journal › Article › peer-review

File

13 Citations (SciVal)

567 Downloads (Pure)

Human movement using a constraint-based software environment: gaining understanding during initial design phases

Singh, B., Hicks, B. J., Medland, A. J., Mullineux, G. & Molenbroek, J. F. M., 2013, In: International Journal of Computer Aided Engineering and Technology. 5, 2-3, p. 118-138

Research output: Contribution to journal › Article › peer-review

Surface modelling and characterization of forming shoulders

Mullineux, G. & Hicks, B. J., Sept 2013.

Research output: Contribution to conference › Paper

Tool path interpolation based on precision poses using geometric algebra

Mullineux, G. & Cripps, R., Sept 2013.

Research output: Contribution to conference › Paper › peer-review

2012

A method for exploring similarities and visual references to brand in the appearance of mature mass-market products

Ranscombe, C., Hicks, B. J. & Mullineux, G., Sept 2012, In: Design Studies. 33, 5, p. 496-520 25 p.

Research output: Contribution to journal › Article › peer-review

File

40 Citations (SciVal)

370 Downloads (Pure)

A simplified tool to support design, sales, and customer interaction for complex forming shoulder design

Mullineux, G. & Hicks, B. J., 2012, Tools and Methods of Competitive Engineering - TMCE 2012. Horváth, I., Rusák, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 963-972 10 p.

Research output: Chapter or section in a book/report/conference proceeding › Book chapter

Computer-based finite element modelling techniques for tennis racket string-beds

Kelly, A., Valentine, R. M. & Mullineux, G., 2012, Tools and Methods of Competitive Engineering - TMCE 2012. Horváth, I., Rusák, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 777-786 10 p.

Research output: Chapter or section in a book/report/conference proceeding › Book chapter

Constructing 3D motions from curvature and torsion profiles

Cripps, R. J. & Mullineux, G., May 2012, In: Computer-Aided Design. 44, 5, p. 379-387 9 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (SciVal)

Cost reduction and product innovation for bulk handling machines

Mullineux, G. (Performer) & Hillis, A. (Other), 2012

Research output: Non-textual form › Digital or Visual Products

Cost reduction and product innovation with Stock Redler: KTA074

Mullineux, G., 2012, 4 p.

Research output: Other contribution

Cost reduction and product innovation with Stock Redler

Hillis, A. (Other) & Mullineux, G. (Other), 2012

Research output: Non-textual form › Web publication/site

Evaluating similarity and exploring branding in vehicle styling using fourier decomposition

Ranscombe, C. H., Mullineux, G. & Hicks, B. J., 2012, Design 2012: Proceedings of the 12th International Design Conference, May 21-24, 2012, Dubrovnik - Croatia. Marjanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Glasgow : Design Society, p. 1377-1385 9 p.

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

2 Citations (SciVal)

Numerical optimization approach to modelling delamination and buckling of geometrically constrained structures

Mullineux, G., Hicks, B. J. & Berry, C., 28 Apr 2012, In: Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences. 370, 1965, p. 1925-1941 17 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (SciVal)

Optimization methods for mechanism synthesis: a comparison

Feldman, J., Hicks, B. J. & Mullineux, G., 2012, Tools and Methods of Competitive Engineering - TMCE 2012. Horváth, I., Rusák, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 767-776 10 p.

Research output: Chapter or section in a book/report/conference proceeding › Book chapter

2011

Atlas of spherical four-bar mechanisms

Mullineux, G., Nov 2011, In: Mechanism and Machine Theory. 46, 11, p. 1811-1823 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

59 Citations (SciVal)

335 Downloads (Pure)

Capturing constraint evolution: A technique to preserve and handle design knowledge

Ding, L., Matthews, J. & Mullineux, G., 2011, In: International Journal of Product Development. 15, 1/2/3, p. 135-155 21 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (SciVal)

Characterizing and evaluating aesthetic features in vehicle design

Ranscombe, C., Hicks, B., Mullineux, G. & Singh, B., 2011, p. 792-799. 8 p.

Research output: Contribution to conference › Paper › peer-review

Constraint-based modelling and optimization to support the design of complex multi-domain engineering problems

Edmunds, R., Feldman, J. A., Hicks, B. J. & Mullineux, G., 1 Oct 2011, In: Engineering with Computers. 27, 4, p. 319-336 18 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (SciVal)

Contrasting opportunities for Mass Customization in food manufacture and food processes

Matthews, J., McIntosh, R. & Mullineux, G., 30 Nov 2011, Mass Customization: Engineering and Managing Global Operations. Flavio, F. & da Silveira, G. (eds.). Springer, Vol. IV. p. 353-374 22 p. (Springer Series in Advanced Manufacturing).

Research output: Chapter or section in a book/report/conference proceeding › Book chapter

7 Citations (SciVal)

Introducing loading uncertainty in topology optimization

Dunning, P. D., Kim, H. A. & Mullineux, G., Apr 2011, In: AIAA Journal. 49, 4, p. 760-768 9 p.

Research output: Contribution to journal › Article › peer-review

150 Citations (SciVal)

Investigation and improvement of sensitivity computation using the area-fraction weighted fixed grid FEM and structural optimization

Dunning, P. D., Kim, H. A. & Mullineux, G., Aug 2011, In: Finite Elements in Analysis and Design. 47, 8, p. 933-941 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

57 Citations (SciVal)

287 Downloads (Pure)

Lightweight product lifecycle information management for small enterprises

Ding, L., Ball, A., Patel, M., Mullineux, G. & Matthews, J., Jan 2011, In: International Journal of Product Lifecycle Management (IJPLM). 5, 1, p. 21-36 16 p.

Research output: Contribution to journal › Article › peer-review

File

8 Citations (SciVal)

290 Downloads (Pure)

Modelling the material flow and web tension in the vertical form–fill–seal packaging process

Matthews, J., Hicks, B. J., Mullineux, G., Goodwin, J. & Burke, A., Dec 2011, In: Packaging Technology and Science. 24, 8, p. 435-450 16 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (SciVal)

1 Citation (SciVal)

Visually decomposing vehicle images: Exploring the influence of different aesthetic features on consumer perception of brand

Ranscombe, C., Hicks, B., Mullineux, G. & Singh, B., 2011, In: Design Studies. 33, 4, p. 319-341

Research output: Contribution to journal › Article › peer-review

Open Access

File

86 Citations (SciVal)

564 Downloads (Pure)

Glen Mullineux

Research output

Search results