No photo of Alan Bramley

Alan Bramley

Prof

19892011
If you made any changes in Pure these will be visible here soon.

Research Output 1989 2011

2011
31 Citations (Scopus)

RFID-enabled gateway product service system for collaborative manufacturing alliances

Huang, G. Q., Qu, T., Fang, M. J. & Bramley, A. N., 2011, In : CIRP Annals - Manufacturing Technology. 60, 1, p. 465-468 4 p.

Research output: Contribution to journalArticle

Radio frequency identification (RFID)
Costs
Visibility
2009
37 Citations (Scopus)

Design of sustainable product life cycles

Niemann, J., Tichkiewitch, S., Westkamper, E., Aldinger, L., Alzaga, A., Baguley, P., Bittner, T., Boër, C., Bossin, D., Bramley, A. N., Brissaud, D., Bünting, F., Bufardi, A., Chryssolouris, G., Colledani, M., Dinkelmann, M., Dori, D., Draghici, G., Draghici, A., Du Preez, N. D. & 44 others, Enparantza, R., Fischer, A., Giess, M., Grozav, I., Haag, H., Hayka, H., Ilie-Zudor, E., Jovane, F., Kals, H., Kind, C., Kjellberg, T., Komoto, H., Krause, F-L., Lutters, E., Maropoulos, P. G., Matthews, P., Mavrikios, D., Molcho, G., Monostori, L., Noel, F., Nyqvist, O., Paris, H., Rogstrand, V., Romero, R., Rothenburg, U., Roucoules, L., Sacco, M., Salonitis, K., Schneor, R., Shpitalni, M., Shtub, A., Sivard, G., Stavropoulos, P., Stolz, M., Te Riele, F. L. S., Tolio, T., Tomiyama, T., Toxopeus, M., Turc, C., Urgo, M., Van Driel, O. P., Van Houten, F. J. A. M., Váncza, J. & Xirouchakis, P., 2009, Springer. 209 p.

Research output: Book/ReportBook

Product lifecycle
Life cycle
Life cycle management
Information support
Production line
2008

A quantitative analysis of beach casting

Charles, B., Almond, D. P., Salo, A. I. T. & Bramley, A. N., Jun 2008, The Engineering of Sport 7, Volume 1. Estivalet, M. & Brisson, P. (eds.). Paris: Springer, Vol. 1. p. 183-189 7 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

beaches
quantitative analysis
casts
projectiles
fishing
9 Citations (Scopus)

Determination of experimental axial and sideways metal flow in open die forging

Aksakal, B., Osman, F. H. & Bramley, A. N., 2008, In : Materials & Design. 29, 3, p. 576-583 8 p.

Research output: Contribution to journalArticle

Metals
Flow measurement
Manipulators
Automation
Direction compound
2007
36 Citations (Scopus)

A Friction model for microforming

Jeon, J. & Bramley, A., 2007, In : International Journal of Advanced Manufacturing Technology. 33, 1-2, p. 125-129 5 p.

Research output: Contribution to journalArticle

2006
17 Citations (Scopus)
Reinforcement
Sand
Processing
Costs

A System for Radio Tracking of Team-Sports Players

Bramley, A. N., Pennock, S. R., Kerwin, D., Shepherd, P. R. & Trewartha, G., Jul 2006.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Forces generated in a climbing rope during a fall

Phillips, A., Vogwell, J. & Bramley, A., 2006, The Engineering of Sport 6: Volume 1: Development for sports . Moritz, E. F. & Haake, S. (eds.). Springer, Vol. 1. p. 63-68 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Rocks
Sports
Stiffness

UWB Tracking for Sports and Entertainment

Pennock, S. R., Shepherd, P. R., Trewartha, G. & Bramley, A. N., Nov 2006.

Research output: Contribution to conferencePaper

2005

Advances in Integrated Design and Manufacturing in Mechanical Engineering

Bramley, A. (ed.), Brissaud, D. (ed.), Coutellier, D. (ed.) & McMahon, C. A. (ed.), 2005, Dordrecht, Germany: Springer. 432 p.

Research output: Book/ReportBook

708 Citations (Scopus)

Asymmetric single point incremental forming of sheet metal

Bramley, A. N., Jeswiet, J., Micari, F., Duflou, J. & Allwood, J., 2005, In : CIRP Annals - Manufacturing Technology. 54, 2, p. 623-649 27 p.

Research output: Contribution to journalArticle

Incremental sheet metal forming: a die-less rapid prototyping process for sheetmetal

Masuku, E. S., Bramley, A. N., Mileham, A. R. & Owen, G. W., 2005, Advances in Integrated Design and Manufacturing in Mechanical Engineering. Bramley, A. N., Brissaud, D., Coutellier, D. & McMahon, C. (eds.). Dordrecht, The Netherlands: Springer, p. 305-314 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Metal forming
Rapid prototyping
Sheet metal
Milling machines
Computer aided design

Incremental sheet-metal forming simulation and accuracy

Qin, Q., Masuku, E. S., Bramley, A. N., Mileham, A. R. & Owen, G. W., 2005, p. CD Paper-484.

Research output: Contribution to conferencePaper

Simulating electroplated micro surfaces in 3-D process

Jeon, A. H. J., Low, J., Mileham, A. R., Bramley, A. N. & Johal, C., 2005, p. 173-176. 4 p.

Research output: Contribution to conferencePaper

2004

A System for Radio Tracking of Team Sports Players

Kencl, L., Pias, M., Pennock, S. R., Bramley, A. N., Kerwin, D., Shepherd, P. R. & Trewartha, G., Sep 2004.

Research output: Contribution to conferencePaper

Creation of residual stresses during forging and heat treatment

Lacarac, V., Smith, D., Tierney, M., Chang, C. C., Bramley, A. N., McMahon, C., Culley, S. J., Dekoninck, E. A., Medland, A. J., Mileham, A. R., Newnes, L. B. & Owen, G. W., 2004.

Research output: Contribution to conferencePaper

Dictionary of production engineering III manufacturing systems

Bramley, A. N., Mathieu, L., Moisan, A., Reinhart, G., Weill, R. D., Weinert, K. & Westkamper, E., 2004, Berlin, Heidelberg, Germany: Springer.

Research output: Book/ReportBook

Incremental sheetmetal forming: a die-less rapid prototyping process for sheetmetal

Masuku, E. S., Bramley, A. N., Mileham, A. R. & Owen, G. W., 2004, p. Abstract 13, Proceedings 305-314.

Research output: Contribution to conferencePaper

8 Citations (Scopus)

Predictions and measurements of residual stresses from forging and heat treatment

Lacarac, V., Chang, C. C., Bramley, A. N., Tierney, M. J., McMahon, C. A. & Smith, D. J., 2004, In : Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218 , 3, p. 301-313 13 p.

Research output: Contribution to journalArticle

Forging
Residual stresses
Heat treatment
Cooling
Microstructure

Proceedings of the IDMME 2004 Conference

Bramley, A. N., Culley, S. J., Dekoninck, E. A., McMahon, C. A., Medland, A. J., Mileham, A. R., Newnes, L. B. & Owen, G. W., 2004, Bath, U. K.: University of Bath. (Proc IDMME (Abstracts and CD))

Research output: Book/ReportBook

9 Citations (Scopus)

The impact of run-up in ensuring rapid changeover

Mileham, A. R., Culley, S. J., Owen, G. W., Newnes, L. B., Giess, M. D. & Bramley, A. N., 2004, In : CIRP Annals - Manufacturing Technology. 53, 1, p. 407-410 4 p.

Research output: Contribution to journalArticle

Data mining
Processing
Industry
2003
13 Citations (Scopus)

A geometric approach to modelling friction in metal forming

Becker, R., Jeon, H. J., Chang, C. C. & Bramley, A. N., 2003, In : CIRP Annals - Manufacturing Technology. 52, 1, p. 209-212 4 p.

Research output: Contribution to journalArticle

Principal outcomes of the EC thematic network on modelling tools for the forging industry

Kirk, C. S. & Bramley, A. N., 2003, Materials Science, Testing and Informatics. Vol. 414-4. p. 425-429 5 p. (Materials Science Forum).

Research output: Chapter in Book/Report/Conference proceedingChapter

Simulation
Industry
Competitiveness
Modeling
Progression
2002

A finite element modelling of the electroplating process

Masuku, E. S., Mileham, A. R., Hardisty, H., Bramley, A. N., Johal, C. & Detassis, P., 2002.

Research output: Contribution to conferencePaper

14 Citations (Scopus)

A finite element simulation of the electroplating process

Masuku, E. S., Mileham, A. R., Hardisty, H., Bramley, A. N., Johal, C. & Detassis, P., 2002, In : CIRP Annals - Manufacturing Technology. 51, 1, p. 169-172 4 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

A finite element simulation of the electroplating process

Mileham, A. R., Hardisty, H., Bramley, A. N., Masuku, E. S., Johal, C. & Detassis, P., 2002, p. 263-270. 8 p.

Research output: Contribution to conferencePaper

Modelling the electroplating process

Mileham, A. R., Hardisty, H., Bramley, A. N., Masuku, E. S., Johal, C. & Detassis, P., 2002.

Research output: Contribution to conferencePaper

15 Citations (Scopus)

Parametric sensitivity analyses for FEA of hot steel forging

Snape, G., Clift, S. & Bramley, A. N., 2002, In : Journal of Materials Processing Technology. 125, p. 353-360 8 p.

Research output: Contribution to journalArticle

Self Learning and group projects in Engineering

Bramley, A. N. & Culley, S. J., 3 Apr 2002, p. 31-40. 10 p.

Research output: Contribution to conferencePaper

2001
1 Citation (Scopus)
2 Citations (Scopus)
Extrusion
Numerical analysis
Forging
Service life
Statistical methods

Forming processes and simulation

Bramley, A. N., Pham, D. T., Dimov, S. S. & Hagan, V. O., 2001, p. 3-10. 8 p.

Research output: Contribution to conferencePaper

Incremental sheet forming process for small batch and prototype parts

Bramley, A. N., Vollersten, F. & Kleiner, M., 2001, EPRINTS-BOOK-TITLE. Germany: Verlag Meisenbach Bamberg, p. 95-102 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

28 Citations (Scopus)
2000
24 Citations (Scopus)

The use of forging simulation tools

Bramley, A. N. & Mynors, D. J., 2000, In : Materials & Design. 21, 4, p. 279-286 8 p.

Research output: Contribution to journalArticle

UBET and TEUBA fast methods for forging simulation and preform design

Bramley, A. N., Venknatesh, V. C., Yusof, N. M., Sharif, S., Yusof, S. M. & Salehun, M. A. K., 2000, p. 293-298. 6 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Die design for the cold forging of spur gears

Kwon, H. H., Bramley, A. N., Mileham, A. R., Newnes, L. B. & Owen, G. W., 1999, p. 105-109. 5 p.

Research output: Contribution to conferencePaper

Forging preform design using reverse simulation for plain strain application

Chang, C. C., Bramley, A. N., Mileham, A. R., Newnes, L. B., Owen, G. W., Bramley, A. N. (ed.), Mileham, A. R. (ed.), Newnes, L. B. (ed.) & Owen, G. W. (ed.), 1999, p. 93-97. 5 p.

Research output: Contribution to conferencePaper

From Kudo to TEUBA

Bramley, A. N., 1999, Umformtechnik 2000Plus. Geiger, M. (ed.). Bamberg, Germany: Meisenbach-Verlag, p. 81-99 19 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Moving to right first time through the application of forging simulation - an industrial case study

Crookes, J. M., Mynors, D. J., Bramley, A. N., Garner, D. G., Hankers, J. B., Haseldine, J., Delday, T. D., Mileham, A. R., Newnes, L. B., Owen, G. W., Mileham, A. R. (ed.), Newnes, L. B. (ed.) & Owen, G. W. (ed.), 1999, p. 99-103. 5 p.

Research output: Contribution to conferencePaper

The use of forging simulation tools

Bramley, A. N., Mynors, D. J. & Geiger, M., 1999, p. 1583-1596. 14 p.

Research output: Contribution to conferencePaper

1998
11 Citations (Scopus)

Sensitivity of finite element analysis of forging to input parameters

Snape, R. G., Clift, S. E. & Bramley, A. N., 1998, In : Journal of Materials Processing Technology. 82, 1-3, p. 21-26 6 p.

Research output: Contribution to journalArticle

1997

A view of the future of forging

Bramley, A. N., Dean, T. A. & Standring, P. M., Nov 1997, In : Journal of the Institute of Forging Technology. 5, p. 38-41 4 p.

Research output: Contribution to journalArticle

Implications of IT for forging technology

Bramley, A. N., 1997, In : Journal of the Institute of Forging Technology. 5, 3, p. 38-38 1 p.

Research output: Contribution to journalArticle

1996

Simulation in manufacturing

Bramley, A. N., 1996, In : Journal of Engineering Manufacture. 210, p. 291-291 1 p.

Research output: Contribution to journalArticle

Versatile forging modelling

Bramley, A. N., Bowyer, A., Clift, S. E., Mynors, D. J., Pitt-Francis, J. M., Snape, R. G. & Standring, P., 1996.

Research output: Contribution to conferencePaper

1995

Forging modelling

Bramley, A. N., May 1995, p. 165-168. 4 p.

Research output: Contribution to conferencePaper