The Foundry: Centre for Digital, Manufacturing & Design

Sciatti, F., Di Domenico, V., Zagaria, L., Adeyemi, D., Plummer, A., Sell, N., Tamburrano, P., Distaso, E. & Amirante, R., 16 Jun 2024, (Acceptance date).

Research output: Contribution to conference › Paper › peer-review

What Influences the Robotics and Automation Adoption in Manufacturing: People, Technology or the Environment?

Kilic-Ararat, A. B., Giannikas, V. & Georgiou, F., 3 Jul 2024.

Research output: Contribution to conference › Paper › peer-review

Open Access

File

31 Downloads (Pure)

2023

Design and Experimental Investigation of an Additively Manufactured High-Speed Switching Valve

Matias, L., Pan, M. & Plummer, A., 17 Nov 2023.

Research output: Contribution to conference › Paper › peer-review

RADICALLY IMPROVING THE FRACTURE TOUGHNESS OF BONDED THERMOSET JOINTS

Maierhofer, T., Loukaides, E. G., Carr, C., Bisagni, C. & Butler, R., 4 Aug 2023.

Research output: Contribution to conference › Paper › peer-review

Shape tracking with mutual inductance from an array of coils

Dingley, G., Semaj, E., Petrou, M. & Soleimani, M., 12 Jun 2023.

Research output: Contribution to conference › Paper › peer-review

Open Access

File

16 Downloads (Pure)

Testing and modelling of 3D printed steel plates stiffened by sinusoidal waves.

Pan, J., Wang, J., Evernden, M. & Sun, Y., 1 Dec 2023.

Research output: Contribution to conference › Paper › peer-review

Open Access

2022

A 3D Lung imaging using ultrasound computed tomography

Soleimani, M. & Rymarczyk, T., 21 Jun 2022.

Research output: Contribution to conference › Paper › peer-review

Application of ultrasound tomography in reactive crystallization processing of calcium carbonate

Abouelazayem, S., Koulountzios, P., Soleimani, M., Rymarczyk, T. & Koiranen, T., 30 Jun 2022, (Acceptance date).

Research output: Contribution to conference › Paper › peer-review

Automating Concrete Construction: Sustainable Social Housing in Colombia

Castro e Costa, E., Shepherd, P., Velasco, R. & Hudson, R., 9 Nov 2022, p. 254-259. 6 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

Design and Control of an Additively Manufactured Valve for Switched Inertance Hydraulic Converters

Matias, L., Chu, H., Pan, M., Plummer, A., Stephen, S. & Collins, A., 19 Sept 2022.

Research output: Contribution to conference › Paper

Digital Design of Automatically Wound Shear Reinforcement for Non-prismatic Concrete Beams

Perepechay, A., Spadea, S., Castro e Costa, E. & Shepherd, P., 5 Sept 2022, p. 201-208.

Research output: Contribution to conference › Paper › peer-review

Learning on the job through collaborative learning: analysing the appropriation of BIM knowledge in micro-enterprise architectural design companies

Ferreira, R. C., Rocha, P., Pereira, L., Codinhoto, R. & Fabricio, M. M., 22 Feb 2022, (Acceptance date).

Research output: Contribution to conference › Paper › peer-review

Multimodal Sensor-Based Human-Robot Collaboration in Assembly Tasks

Male, J., Al, G. A., Shabani, A. & Martinez Hernandez, U., 6 Jul 2022, (Acceptance date). 6 p.

Research output: Contribution to conference › Paper › peer-review

THE CHARACTERISATION OF SKELETON ATHLETES’ PLANTAR PRESSURE ACROSS THE PUSH START

Valentine, M., Dhokia, V., Pegg, E., Shin, C., Holdcroft, D., Short, D. & Colyer, S., 20 Jul 2022, p. 716-719. 4 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

Towards A Disciplinary Framework for Engineering and Manufacture

Carey, E., Lattanzio, S., Sajdakova, J. & Newnes, L., 6 Sept 2022.

Research output: Contribution to conference › Paper › peer-review

Wearable fingertip with touch, sliding and vibration feedback for immersive virtual reality

Martinez Hernandez, U. & Al, G. A., 6 Jul 2022, (Acceptance date). 6 p.

Research output: Contribution to conference › Paper › peer-review

2021

A Low-Cost Compact Soft Tactile Sensor with a Multimodal Chip

Al, G. A. & Martinez Hernandez, U., 6 Oct 2021, (Acceptance date). 6 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

File

160 Downloads (Pure)

A Path Towards Off-site Automated Fabrication of Segmented Concrete Shells as Building Floors

Oval, R., Castro e Costa, E., Thomas-McEwan, D., Nuh, M., Orr, J. & Shepherd, P., 27 Aug 2021.

Research output: Contribution to conference › Paper › peer-review

A single-chip multimodal tactile sensor for a robotic gripper

Al, G. A., Achab Oussallam, B. E. & Martinez Hernandez, U., 6 Oct 2021, (Acceptance date). 6 p.

Research output: Contribution to conference › Paper › peer-review

Collaborative architecture for human-robot assembly tasks using multimodal sensors

Male, J. & Martinez Hernandez, U., 6 Oct 2021, (Acceptance date). 6 p.

Research output: Contribution to conference › Paper › peer-review

Concurrent topology and geometry optimization of truss structures with global stability constraints

Weldeyesus, A., Gondzio, J., He, L., Gilbert, M., Shepherd, P. & Tyas, A., 13 Jun 2021.

Research output: Contribution to conference › Paper › peer-review

Deep learning image reconstruction for underdetermined inverse solution in industrial XCT with limited data

Soleimani, M., 5 Dec 2021.

Research output: Contribution to conference › Paper › peer-review

Efficient control of a switched inertance hydraulic converter with a time-varying load

Yuan, C., Plummer, A. & Pan, M., Oct 2021. 8 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

File

4 Citations (SciVal)

245 Downloads (Pure)

Fabrication-aware Parametric Design of Segmented Concrete Shells

Castro e Costa, E., Oval, R., Shepherd, P. & Orr, J., 27 Aug 2021.

Research output: Contribution to conference › Paper › peer-review

Novel cementitious materials for extrusion-based 3D printing

Dams, B., Hei, Y., Shepherd, P. & Ball, R., 20 Apr 2021, p. 57. 65 p.

Research output: Contribution to conference › Paper › peer-review

File

74 Downloads (Pure)

Structure and Fabrication-driven Conceptual Design of Space-frame Structures

Koronaki, A., Shepherd, P. & Evernden, M., 27 Aug 2021.

Research output: Contribution to conference › Paper › peer-review

Topology optimisation of gridshell structures using a density-based approach

He, Y., Shepherd, P. & Wang, J., 27 Aug 2021.

Research output: Contribution to conference › Paper › peer-review

2020

ProtoSpray: Combining 3D Printing and Spraying to Create Interactive Displays with Arbitrary Shapes

Hanton, O., Wessely, M., Mueller, S., Fraser, M. & Roudaut, A., 23 Apr 2020. 13 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

File

57 Downloads (Pure)

2013

On prepreg properties and manufacturability

Bloom, L. D., Elkington, M., Ward, C., Chatzimichali, A. & Potter, K., 2013, p. 4397-4409. 13 p.

Research output: Contribution to conference › Paper › peer-review

13 Citations (SciVal)

Understanding the lamination process

Elkington, M., Bloom, D., Ward, C., Chatzimichali, A. P. & Potter, K. D., 2 Aug 2013, p. 4385-4396. 12 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

13 Citations (SciVal)

The Foundry: Centre for Digital, Manufacturing & Design

Research output

Search results