The Foundry: Centre for Digital, Manufacturing & Design

2025

Ablation study for multicamera vehicle tracking using CityFlow dataset

Zhang, N., Lin, Y., Lockyer, S., Evans, A. & Zarbock, M., 24 Feb 2025, Seventeenth International Conference on Machine Vision, ICMV 2024. Osten, W. (ed.). 135170V. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13517).

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

A Comparative Study of Two WAAM Patterns for Structures with Grid Fin Characteristics

Guo, X., Pan, J. & Li, Q., 7 Jan 2025, In: Materials. 18, 2, 219.

Research output: Contribution to journal › Article › peer-review

Open Access

Activity-based costing of laser powder-bed additive manufacturing incorporating discrete event simulation

Shokrani Chaharsooghi, A. & Karas, B., 8 May 2025, (Acceptance date) In: npj Advanced Manufacturing.

Research output: Contribution to journal › Article › peer-review

Adaptive pre-excitation control of high speed on/off valve for preserving the dynamic performance against temperature effects

Zhong, Q., Mao, Y., Xu, E., Pan, M., Wang, J., Che, Y. & Yang, H., 31 Aug 2025, In: Thermal Science and Engineering Progress. 64, 103783.

Research output: Contribution to journal › Article › peer-review

Open Access

File

4 Downloads (Pure)

A Digital Hydraulic Valve Design Inspired by Vascular Structures

Liu, M. & Pan, M., 29 Apr 2025, (Acceptance date).

Research output: Contribution to conference › Paper › peer-review

A High-sensitivity Four-layer Capacitively Coupled Electrical Impedance Tomography Sensor for Brain Stroke Monitoring

Li, W., Zhang, M., Shi, Y., Jiang, Y., Soleimani, M., Ji, H. & Wang, B., 1 Aug 2025, In: Measurement. 252, 117385.

Research output: Contribution to journal › Article › peer-review

A Hybrid GRA-TOPSIS-RFR Optimization Approach for Minimizing Burrs in Micro-Milling of Ti-6Al-4V Alloys

Tan, R., Madathil, A. P., Liu, Q., Cheng, J. & Lin, F., 30 Apr 2025, In: Micromachines. 16, 4, 464.

Research output: Contribution to journal › Article › peer-review

Open Access

AI-assisted Prediction and Optimization of Micropollutants Removal with Forward Osmosis Membranes

Jafari, M., Tzirtzipi, C., Molaei Aghdam, A., Mikaeili Chahartagh, N. & Castro Dominguez, B., 30 Sept 2025, In: Journal of Membrane Science. 733, 124346.

Research output: Contribution to journal › Article › peer-review

Open Access

A method to create weighted-average life cycle impact assessment results for construction products, and enable filtering throughout the design process

Marsh, E., Hattam, L. & Allen, S., 1 Feb 2025, In: Journal of Cleaner Production. 491, 144467.

Research output: Contribution to journal › Article › peer-review

Open Access

A model of disciplinarity: literature conceptual differences

Carey, E., Newnes, L. B., Hultin, A. O., Imani Asrai, R. & Lattanzio, S., 4 Feb 2025, In: International Journal of Agile Systems and Management. 18, 5, p. 1-23 23 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Application of machine learning for tool condition monitoring using sensor integrated tooling

Drew, D., Betts, J., Sadrafshari, S., Mohammadi, A. & Shokrani, A., 31 Dec 2025, In: Procedia CIRP. 133, p. 66-71 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

File

32 Downloads (Pure)

A Real-Time and Highly Sensitive Differential Microwave Sensor for Liquid Characterization

Mohammadi, P., Mohammadi, A. & Kara, A., 10 Apr 2025, (E-pub ahead of print) In: IETE Journal of Research.

Research output: Contribution to journal › Article › peer-review

Atomic-level flat polishing of polycrystalline diamond by combining plasma modification and chemical mechanical polishing

Yuan, S., Cheung, C. F., Shokrani, A., Zhan, Z. & Wang, C., 21 Apr 2025, (E-pub ahead of print) In: CIRP Annals - Manufacturing Technology.

Research output: Contribution to journal › Article › peer-review

Open Access

Balancing surface quality and machining efficiency in recycling process achieved by micro ball-end milling of flawed potassium dihydrogen phosphate optics

Cheng, J., Lei, H., Zhao, L., Liu, Q., Hu, Y. & Chen, M., 31 Jul 2025, In: Sustainable Materials and Technologies. 44, e01388.

Research output: Contribution to journal › Article › peer-review

Battery electric vehicles show the lowest carbon footprints among passenger cars across 1.5–3.0 °C energy decarbonisation pathways

Simaitis, J., Lupton, R., Vagg, C., Butnar, I., Sacchi, R. & Allen, S., 18 Jun 2025, In: Communications Earth & Environment. 6, 476.

Research output: Contribution to journal › Article › peer-review

Open Access

Bioinspired mechanisms and actuation of soft robotic crawlers

Pan, M., Liu, M., Lei, J., Wang, Y., Linghu, C., Bowen, C. & Hsia, K. J., 24 Apr 2025, In: Advanced Science. 12, 16, 2416764.

Research output: Contribution to journal › Review article › peer-review

Open Access

Biopolymers and Biocomposites: A Comprehensive Review of Feedstocks, Functionalities, and Advanced Manufacturing Techniques for Sustainable Applications

Castro Dominguez, B., Roland Gröls, J., Alkandari, S., Perge, L., Sierra-Avila, C. A., Zea Ramirez, H. R., Lima Fontes, M., Yamada, C., Lazarini, S. C., Silva, J. M., Lustri, W. R. & Silva Barud, H., 18 Jun 2025, (E-pub ahead of print) In: Biotechnology for Sustainable Materials. 2, 8.

Research output: Contribution to journal › Review article › peer-review

Open Access

Characterizing a novel adult erythroid cell line for red blood cell manufacture

Phillips, D., Ellis, M. J., Frayne, J. & Moise, S., 6 May 2025, (E-pub ahead of print) In: Bioengineering and Translational Medicine. e70026.

Research output: Contribution to journal › Article › peer-review

Open Access

Comparing the Chatter Characteristic in Milling of Ti6Al4V Alloy with and without Laser Assistance

Liu, Q., Luo, X., Xie, W., Wang, Z., Chen, X. & Tan, R., 31 Dec 2025, In: Procedia CIRP. 133, p. 680-685 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (SciVal)

Compositional criteria to predict columnar to equiaxed transitions in metal additive manufacturing

Brooke, R., Zhang, D., Qiu, D., Gibson, M. A. & Easton, M., 1 Jul 2025, (E-pub ahead of print) In: Nature Communications. 16, 1, 5710.

Research output: Contribution to journal › Article › peer-review

Open Access

Concurrent optimization of truss structures and build directions for multi-axis additive manufacturing

Ye, J., Lin, X., Lu, H., He, L., Quan, G., Huang, C. & Shepherd, P., 15 Mar 2025, In: Engineering Structures. 327, 119680.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (SciVal)

Cut the scrap: making more use of less metal

Allwood, J., Music, O., Loukaides, E. & Bambach, M., 12 Jun 2025, (E-pub ahead of print) In: CIRP Annals.

Research output: Contribution to journal › Article › peer-review

Open Access

Deep Learning for Recognition of Object Manipulation Hand Gestures using Wearable Sensor Data

Sharples, J. & Martinez Hernandez, U., 9 Jun 2025, (Acceptance date) IEEE RO-MAN.

Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding

Developing Problem Representations in Organizations: A Synthesis across Literatures and an Integrative Framework

Ananth, P., Baer, M. & Deichmann, D., 1 Jul 2025, In: Journal of Management. 51, 6, p. 2212 - 2244 33 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

Development of a novel laboratory approach for evaluating the adhesion strength of biofilms to human dentine

Bulmer, J., Chew, J. & George, R., 15 Jan 2025, In: International Endodontic Journal.

Research output: Contribution to journal › Article › peer-review

Open Access

Edge Manipulations for the Maximum Vertex-Weighted Bipartite b-matching

Auricchio, G., Liu, J., Ma, Q. & Zhang, J., 20 Jan 2025, In: ACM Transactions on Intelligent Systems and Technology. 16, 1, p. 1-26 12.

Research output: Contribution to journal › Article › peer-review

Open Access

Editorial: Advancements in protein modification for enhanced digestibility

Shokri, S. & Jarpa-Parra, M., 11 Apr 2025, In: Frontiers in Nutrition. 12, 1603394.

Research output: Contribution to journal › Editorial › peer-review

Open Access

Effects of sodium chloride on the textural attributes, rheological properties, microstructure, and 3D printing performance of rice starch-curdlan composite gel

Li, W., Zhang, K., Qin, Y., Li, M., Li, H., Guo, M., Xu, T., Sun, Q., Ji, N. & Xie, F., 15 Feb 2025, In: Food Chemistry. 465, 141986.

Research output: Contribution to journal › Article › peer-review

3 Citations (SciVal)

Effects of trust and perceived self-efficacy on aided judgement: an experiment on spelling and grammar checking

Zijlstra, M. & Payne, S., 17 Mar 2025, (E-pub ahead of print) In: Behaviour & Information Technology. 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Efficient Multi-Task Reinforcement Learning via Task-Specific Action Correction

Feng, J., Chen, M., Pu, Z., Qiu, T., Yi, J. & Zhang, J., 19 Feb 2025, (E-pub ahead of print) In: IEEE Transactions on Cognitive and Developmental Systems.

Research output: Contribution to journal › Article › peer-review

Open Access

File

24 Downloads (Pure)

Electrospinning of emulsions stabilized by octenylsuccinylated starch and pullulan

Huang, X., Zhao, F., Teng, Z., Li, Y., Zhang, C., Liu, X., Li, S. & Xie, F., 31 Jan 2025, In: Food Hydrocolloids. 158, 110482.

Research output: Contribution to journal › Article › peer-review

6 Citations (SciVal)

Electrospinning Technology, Machine Learning and Control Approaches: A Review

Shabani, A., Al, G. A., Berri, N., Castro Dominguez, B., Leese, H. & Martinez Hernandez, U., 30 Apr 2025, In: Advanced Engineering Materials. 27, 7, 2401353.

Research output: Contribution to journal › Review article › peer-review

Open Access

Evaluation methods for social housing projects supporting participatory and evidence-based decision-making

Cabrera, L., Hirota, E. & Codinhoto, R., 26 Mar 2025, (E-pub ahead of print) In: Ambiente construido. 25, 19 p., e144717.

Research output: Contribution to journal › Article › peer-review

Open Access

File

17 Downloads (Pure)

Expanding scenario diversity in prospective LCA: Coupling the TIAM-UCL integrated assessment model with Premise and ecoinvent

Šimaitis, J., Butnar, I., Sacchi, R., Lupton, R., Vagg, C. & Allen, S., 30 Apr 2025, In: Renewable and Sustainable Energy Reviews. 211, 115298.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (SciVal)

Experimental validation and 3D finite element modelling of scratch-induced deformation in Ti-6Al-4V alloy

Tur, E., Betts, J., Perge, L., Zeng, Q. & Shokrani, A., 31 Dec 2025, In: Procedia CIRP. 133, p. 8-13 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Filament Type Recognition for Additive Manufacturing Using a Spectroscopy Sensor and Machine Learning

Al, G. A. & Martinez Hernandez, U., 27 Feb 2025, (Acceptance date) In: Sensors.

Research output: Contribution to journal › Article › peer-review

From Control Algorithm to Human Trial: Biomechanical Proof of a Speed-Adaptive Ankle Foot Orthosis for Foot Drop in Level-Ground Walking

Mehryar, P., Firouzy, S., Martinez Hernandez, U. & Dehghani-Sanij, A., 23 Jun 2025, (Acceptance date) In: Biomechanics.

Research output: Contribution to journal › Article › peer-review

Generating global high-resolution current and future weather timeseries, and the implications for India

Hatfield, O., Coley, D., Khattak, S. H., Arya, D. S., Rajasekar, E. & Natarajan, S., 3 Jun 2025, (E-pub ahead of print) In: Building Services Engineering Research and Technology. 01436244251340360.

Research output: Contribution to journal › Article › peer-review

Open Access