The Foundry: Centre for Digital, Manufacturing & Design

Websitehttp://go.bath.ac.uk/TheFoundry

Organisation profile

We are providing industry with the technologies, materials, tools and skills to achieve a truly sustainable manufacturing sector.

UN Sustainable Development Goals

In 2015, UN member states agreed to 17 global Sustainable Development Goals (SDGs) to end poverty, protect the planet and ensure prosperity for all. Our work contributes towards the following SDG(s):

Ismail Hamed Ali Abuzayed
- ihaa23bath.acuk
- Department of Architecture & Civil Engineering - Lead Software Engineer - KTP Associate
- The Foundry: Centre for Digital, Manufacturing & Design
Person: Affiliate staff, Teaching & Other
Poornika Ananth
- par42bath.acuk
- Management - Lecturer (Assistant Professor)
- Strategy & Organisation
- The Foundry: Centre for Digital, Manufacturing & Design
- Innovation Bridge
- Centre for Research in Entrepreneurship and Innovation at Bath
Person: Research & Teaching, Core staff, Affiliate staff
Tareq Assaf
- T.Assafbath.acuk
- Department of Electronic & Electrical Engineering - Lecturer in Robotics Engineering
- The Foundry: Centre for Digital, Manufacturing & Design
- Centre for Bioengineering & Biomedical Technologies (CBio)
Person: Research & Teaching, Core staff, Affiliate staff

5 Not started
38 Active
45 Finished

REECO-SOIL: Regenerative Retrofitting Via Ecologically Active Soil Structures
Jimenez Rios, A. (PI), Calabria-Holley, J. (CoPI), Castilla Pascual, F. J. (CoPI) & Gupta, A. (Researcher)
2/06/25 → 31/07/25
Project: Research-related funding
Life cycle assessment and optimisation of waste stone structures - ISCC summer placement
Hawkins, W. (PI), Jimenez Rios, A. (CoPI), Darby, A. (CoPI) & Mason, S. (Researcher)
2/06/25 → 25/07/25
Project: Research-related funding
Made Smarter Innovation: People-Led Digitalisation Engagement and Impact Acceleration
Newnes, L. (PI), Fai, F. (CoI), Giannikas, V. (CoI), Loukaides, E. (CoI), Shepherd, P. (CoI), Shokrani Chaharsooghi, A. (CoI), Basir, M. (Researcher), Carey, E. (Researcher), Hwabamungu, B. (Researcher), Kilic Ararat, B. (Researcher), Nwaiwu, F. (Researcher), Oliveira Da Silva, M. (Researcher), Roberto, R. (Researcher) & Smyth, L. (Researcher)
Engineering and Physical Sciences Research Council
1/04/25 → 31/03/26
Project: Research council

Ablation study for multicamera vehicle tracking using CityFlow dataset
Zhang, N., Lin, Y., Lockyer, S., Evans, A. & Zarbock, M., 24 Feb 2025, Seventeenth International Conference on Machine Vision, ICMV 2024. Osten, W. (ed.). 135170V. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13517).
Research output: Chapter or section in a book/report/conference proceeding › Chapter in a published conference proceeding
A Comparative Study of Two WAAM Patterns for Structures with Grid Fin Characteristics
Guo, X., Pan, J. & Li, Q., 7 Jan 2025, In: Materials. 18, 2, 219.
Research output: Contribution to journal › Article › peer-review

Open Access
Activity-based costing of laser powder-bed additive manufacturing incorporating discrete event simulation
Shokrani Chaharsooghi, A. & Karas, B., 8 May 2025, (Acceptance date) In: npj Advanced Manufacturing.
Research output: Contribution to journal › Article › peer-review

Dataset for, "Freezing from the heat: Building overcooling in Qatar"
Alnuaimi, A. (Creator), Natarajan, S. (Creator) & Kershaw, T. (Creator), University of Bath, 20 Feb 2024
DOI: 10.15125/BATH-01315
Dataset
Dataset for "3D Printed Contactor for Enhanced Oil Droplets Coalescence"
Al-Shimmery, A. (Creator), Mazinani, S. (Creator), Flynn, J. (Creator), Chew, Y.-M. (Creator) & Mattia, D. (Creator), University of Bath, 19 Jul 2019
DOI: 10.15125/BATH-00641
Dataset
Dataset for "Mitigation versus adaptation: Does insulating buildings increase overheating risk?"
Fosas, D. (Creator), Coley, D. (Creator), Natarajan, S. (Creator), Herrera Fernandez, M. (Creator), Fosas de Pando, M. (Creator) & Ramallo-González, A. (Creator), University of Bath, 26 Jul 2018
DOI: 10.15125/BATH-00390
Dataset

Behaviour and design of steel structures made by wire arc additive manufacturing : (Alternative Format Thesis)
Evans, S. (Author), Wang, J. (Supervisor), Dhokia, V. (Supervisor) & Ibell, T. (Supervisor), 26 Jun 2024
Student thesis: Doctoral Thesis › PhD

File
Fault-Tolerant Control of Dual Three-Phase Electric Machine for Electric Propulsion System
Zheng, H. (Author), Pei, X. (Supervisor), Brace, C. (Supervisor) & Burke, R. (Supervisor), 26 Jun 2024
Student thesis: Doctoral Thesis › PhD
Gender and Sex Bias in PPE Provision: (Alternative Format Thesis)
Janson, D. (Author), Dhokia, V. (Supervisor) & Clift, B. (Supervisor), 4 Dec 2023
Student thesis: Doctoral Thesis › PhD

File