Research Output

Filter
Conference contribution

Distance Estimation by Fusing Radar and Monocular Camera with Kalman Filter

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 23 Sep 2017, SAE Intelligent and Connected Vehicles Symposium. SAE International, 9 p. 2017-01-1978

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
2 Citations (Scopus)
320 Downloads (Pure)

Design of an Air-Cooled Radial Turbine Part 2: Part 2 Experimental Measurements of Heat Transfer

Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, Vol. 8. p. 1-12 12 p. GT2018-76384

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Design of an Air-cooled Radial Turbine Part 1: Computational Modelling

Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., 30 Aug 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, p. 1-13 1 p. GT2018-76378. (Proceedings of the ASME Turbo Expo; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Design of an advanced air path test stand for steady and transient evaluation

Vijayakumar, R., Burke, R., Liu, Y. & Turner, J. W. G., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T07A004 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
9 Downloads (Pure)

Decarbonization of Transport: Synergies between Hydrogen and Alternative Engine Concepts

Turner, J., 18 Feb 2020, KAUST Research Conference: Transition to Low Carbon Mobility 2020.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
16 Downloads (Pure)

Cyclic combustion variability in gasoline engines

Tily, R. & Brace, C. J., 24 Sep 2008, Internal Combustion Engines: Performance, Fuel Economy and Emissions. Institution of Mechanical Engineers, p. 111-120 10 p. (Institution of Mechanical Engineers: Combustion Engines and Fuels Group - Internal Combustion Engines: Performance, Fuel Economy and Emissions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Control strategy study of the series sequential turbocharging using 1-D simulation

Zhang, Q., Brace, C., Akehurst, S., Burke, R., Capon, G., Smith, L., Garrett, S. & Zhang, K., 2013, ASME Turbo Expo, 2013: Turbine Technical Conference and Exposition. San Antonio, U. S. A.: ASME, Vol. 5A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Compressor pressure investigation of surge onset at steady and unsteady operations of an automotive turbocharger

Avola, C., Duda, T., Burke, R. & Copeland, C., May 2018, IMECHE Turbochargers and Turbocharging 2018. Curran Associates, Inc., p. 503-513

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison betweenunthrottled, single and two-valve induction strategies utilising direct gasoline injection: emissions, heat-release and fuel consumption analysis

Patel, R., Ladommatos, N., Stansfield, P. A., Wigley, G., Garner, C. P., Pitcher, G., Turner, J. W. G. & Nuglisch, H., 2008, SAE Techincal Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Citations (Scopus)

Comparison between the steady performance of double-entry and twin-entry turbocharger turbines

Romagnoli, A., Copeland, C., Martinez-Botas, R. & Rajoo, S., 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (GT2011). ASME, p. 1995-2007

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Comparison between steady and unsteady double-entry turbine performance using the quasi-steady assumption

Copeland, C., Martinez-Botas, R. & Seiler, M., 2009, ASME Turbo Expo 2009: Power for Land, Sea, and Air. Volume 7 - Turbomachinery, Parts A and B . ASME, p. 1203-1212

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Cold start emissions optimisation using an expert knowledge based calibration methodology

McNicol, A. C., Figueroa-Rosas, H., Brace, C. J., Ward, M. C. & Ceen, R. V., 8 Mar 2004, 2004 SAE World Congress. SAE International, 2004-01-0139. (SAE 2004 World Congress & Exhibition; vol. 2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

A throttle loss recovery concept using an expander for a 2.0 litre turbocharged gasoline engine

Lu, P., Hu, B. & Brace, C., 2015, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition: Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Assessment of the supercharging boosting component for heavily downsized gasoline engines

Copeland, C., Romagnoli, A., Wan-Salim, W. B., Gurunathan, B., Martinez-Botas, R., Turner, J., Luard, N., Jackson, R., Matteucci, L., Brace, C., Akehurst, S. & Lewis, A., 2014, IMECHE Turbocharger and Turbocharging Proceedings, 2014. IMechE Conference Transactions

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Assessment of supercharging boosting component for heavily downsized gasoline engines

Romagnoli, A., Wan-Salim, W. S. I., Gurunathan, B. A., Martinez-Botas, R. F., Turner, J. W. G., Luard, N., Jackson, R., Matteucci, L., Copeland, C., Akehurst, S., Lewis, A. G. J. & Brace, C. J., 1 Jan 2014, Institution of Mechanical Engineers - 11th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Ltd., p. 13-26 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Application of a rotary expander as an energy recovery system for a modern Wankel engine

Vorraro, G., Islam, R., Turner, M. & Turner, J., 10 Jan 2020, Internal Combustion Engines and Powertrain Systems for Future Transport 2019: Proceedings of the International Conference on Internal Combustion Engines and Powertrain Systems for Future Transport (ICEPSFT 2019), December 11-12, 2019, Birmingham, UK. 1st ed. CRC Press

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Numerical Study of the benefits of electrically assisted boosting systems

Burke, R., 8 Nov 2015, A Numerical Study of the benefits of electrically assisted boosting systems.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel air and EGR emulation facility for the optimisation of the powertrain architecture

Orchard, S., Ozturk, U., Evans, N., Duda, T., Chappell, E. & Burke, R., 1 Jan 2020, ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019. U. S. A.: American Society of Mechanical Engineers (ASME), 8 p. ICEF2019-7166, V001T05A003. (ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An improved rate of heat release model for modern high speed diesel engines

Dowell, P. G., Akehurst, S. & Burke, R. D., 1 Jan 2016, ASME 2016 Internal Combustion Engine Fall Technical Conference, ICEF 2016. U. S. A.: American Society of Mechanical Engineers (ASME), p. V001T05a003 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A new turboexpansion concept in a twin-charged engine system

Hu, B., Copeland, C., Brace, C., Akehurst, S., Romagnoli, A., Martinez-Botas, R. & Turner, J., 13 Oct 2014, SAE Technical Paper. SAE International, 2014-01-2596

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Analysis of the opportunities and trade-offs for an 48V electrified air path

Liu, Y., Vijayakumar, R. & Burke, R., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T05A007 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)
11 Downloads (Pure)

Analysis of different uniflow scavenging options for a medium-duty 2-stroke engine for a U.S. light-truck application

Turner, J., Head, R. A., Wijetunge, R. S., Chang, J., Engineer, N., Blundell, D. W. & Burke, P., 5 Nov 2018, Proceedings of the 2018 ASME Internal Combustion Engines Fall Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Analysis of a Diesel Passenger Car Behavior On-road and over Certification Duty Cycles

Chappell, E., Burke, R., Lu, P., Gee, M. & Williams, R., Oct 2016, SAE Fuels and Lubes 2016. 2016-01-2328

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis and comparison of the performance of an inverted brayton cycle and turbo-compounding with decoupled turbine and cvt driven compressor for small automotive engines

Lu, P., Brace, C., Hu, B. & Copeland, C., 2016, Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME), 13 p. GT2016-57675. (Proceedings of the ASME Turbo Expo; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A method of map extrapolation for unequal and partial admission in a double entry turbine

Newton, P., Romagnoli, A., Martinez-Botas, R., Copeland, C. & Seiler, M., 2013, Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition. San Antonio, U. S. A., Vol. 6 C. p. V06CT40A024 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Air-fuel-ratio control of engine system with unknown input observer

Na, J., Herrmann, G., Rames, C., Burke, R. & Brace, C., 7 Nov 2016, 2016 UKACC International Conference on Control, UKACC Control 2016. IEEE, 7737647

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A design of experiments approach to the control of chassis dynamometer testing error

Burke, R., Brace, C. & Moffa, J., 2009, Design of Experiments in Engine Development. 5th ed. Renningen, Germany: Expert Verlag, p. 214-223

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
17 Downloads (Pure)

Adaptive air-fuel ratio control for spark ignition engines with time-varying parameter estimation

Chen, A. S., Na, J., Herrmann, G., Burke, R. & Brace, C., 21 Mar 2018, Proceedings of 2017 9th International Conference On Modelling, Identification and Control, ICMIC 2017. IEEE, Vol. 2018-March. p. 1074-1079 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A comparison of timescales within a pulsed flow turbocharger turbine

Copeland, C. D., Newton, P., Martinez-Botas, R. F. & Seiler, M., 1 Jan 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Ltd., p. 389-404 16 p. (Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

29 Citations (Scopus)

A comparative study on different cooling topologies for axial flux permanent magnet machine

Chuan, H., Burke, R. & Wu, Z., Oct 2019, 2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings. IEEE, 8952185. (2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Accuracy of diesel engine combustion metrics over the full range of engine operating conditions

Dowell, P. G., Burke, R. D. & Akehurst, S., 1 Jan 2018, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development. American Society of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution