Research Output

Filter
Conference contribution
2016

Thermal management of a low cost range extender for electric vehicles

Agarwal, A., Rodrigues, L., Liu, D., Lewis, A. G. J., Akehurst, S., Brace, C. J., Kirkpatrick, G. & Ash, L., 2016, Proceedings of the 6th Hybrid and Electric Vehicles Conference (HEVC 2016). Institution of Engineering and Technology, p. 16

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2017

A review of Life Cycle Assessment approaches applied to automotive energy vectors

Willmott, H. J., Turner, J. W. G. & McManus, M. C., 2017, Institution of Mechanical Engineers - Internal Combustion Engines 2017. Institution of Mechanical Engineers, p. 269-281 13 p. (Institution of Mechanical Engineers - Internal Combustion Engines 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Distance Estimation by Fusing Radar and Monocular Camera with Kalman Filter

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 23 Sep 2017, SAE Intelligent and Connected Vehicles Symposium. SAE International, 9 p. 2017-01-1978

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
2 Citations (Scopus)
324 Downloads (Pure)

Implementing full electric turbocharging systems on highly boosted gasoline engines

Zhang, Q., Lu, P., Dimitriou, P., Akehurst, S., Copeland, C., Zangeneh, M., Richards, B. & Fowler, G., 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition: Volume 8 :Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME), p. V008T26A032 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Inverted Brayton Cycle With Exhaust Gas Condensation

Kennedy, I., Chen, Z., Jones, S., Ceen, B. & Copeland, C., 2017, ASME Turbo Expo 2017 Conference Proceedings. Charlotte, U. S. A.: American Society of Mechanical Engineers (ASME), GT2017-64695

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2018

Accuracy of diesel engine combustion metrics over the full range of engine operating conditions

Dowell, P. G., Burke, R. D. & Akehurst, S., 1 Jan 2018, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development. American Society of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adaptive air-fuel ratio control for spark ignition engines with time-varying parameter estimation

Chen, A. S., Na, J., Herrmann, G., Burke, R. & Brace, C., 21 Mar 2018, Proceedings of 2017 9th International Conference On Modelling, Identification and Control, ICMIC 2017. IEEE, Vol. 2018-March. p. 1074-1079 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Analysis of different uniflow scavenging options for a medium-duty 2-stroke engine for a U.S. light-truck application

Turner, J., Head, R. A., Wijetunge, R. S., Chang, J., Engineer, N., Blundell, D. W. & Burke, P., 5 Nov 2018, Proceedings of the 2018 ASME Internal Combustion Engines Fall Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Compressor pressure investigation of surge onset at steady and unsteady operations of an automotive turbocharger

Avola, C., Duda, T., Burke, R. & Copeland, C., May 2018, IMECHE Turbochargers and Turbocharging 2018. Curran Associates, Inc., p. 503-513

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of an Air-cooled Radial Turbine Part 1: Computational Modelling

Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., 30 Aug 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, p. 1-13 1 p. GT2018-76378. (Proceedings of the ASME Turbo Expo; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Design of an Air-Cooled Radial Turbine Part 2: Part 2 Experimental Measurements of Heat Transfer

Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, Vol. 8. p. 1-12 12 p. GT2018-76384

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Driving Style Analysis by Classifying Real-World Data with Support Vector Clustering

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 18 Oct 2018, 2018 3rd IEEE International Conference on Intelligent Transportation Engineering, ICITE 2018. IEEE, p. 264-268 5 p. 8492700. (2018 3rd IEEE International Conference on Intelligent Transportation Engineering, ICITE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Experimental investigation of an inverted Brayton cycle for exhaust gas energy recovery

Kennedy, I., Chen, Z., Ceen, B., Jones, S. & Copeland, C., 4 Oct 2018, Journal of Engineering for Gas Turbines and Power: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. 3 ed. American Society of Mechanical Engineers (ASME), Vol. 141. 11 p. GT2018-75386. (Journal of Engineering for Gas Turbines and Power).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Multipoint Optimisation of Radial Compressor Using Computational Fluid Dynamics and Genetic Algorithm

Tuechler, S., Chen, Z. & Copeland, C., May 2018, GPPS-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nonlinear Observer-Based Air-Fuel Ratio Control for Port Fuel Injected Wankel Engines

Chen, A. S., Herrmann, G., Na, J., Turner, M., Vorraro, G. & Brace, C., 31 Oct 2018, Proceedings 12th UKACC International Conference on Control, CONTROL 2018. IEEE, p. 224-229

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Performance of the automotive turbocharger compressor with various CO 2-air mixtures

Duda, T. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. Vol. 8. 9 p. GT2018-75747

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Real-world to Lab – Robust measurement requirements for future vehicle powertrains

Lewis, A., Chappell, E. & Akehurst, S., 28 Jun 2018, 13th International AVL Symposium on Propulsion Diagnostics.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Testing of a Modern Wankel Rotary Engine - Part I: Experimental Plan, Development of the Software Tools and Measurement Systems

Vorraro, G., Turner, M. & Turner, J., 14 Nov 2018, (Acceptance date) SAE International Journal of Engines. 16 p. 2019-01-0075

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

A comparative study on different cooling topologies for axial flux permanent magnet machine

Chuan, H., Burke, R. & Wu, Z., Oct 2019, 2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings. IEEE, 8952185. (2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of the opportunities and trade-offs for an 48V electrified air path

Liu, Y., Vijayakumar, R. & Burke, R., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T05A007 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)
12 Downloads (Pure)

Design of an advanced air path test stand for steady and transient evaluation

Vijayakumar, R., Burke, R., Liu, Y. & Turner, J. W. G., 3 Jan 2019, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T07A004 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
11 Downloads (Pure)

Driving Style Modelling with Adaptive Neuro-Fuzzy Inference System and Real Driving Data

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 1 Jan 2019, Advances in Human Aspects of Transportation - Proceedings of the AHFE 2018 International Conference on Human Factors in Transportation, 2018. Springer Verlag, p. 481-490 10 p. (Advances in Intelligent Systems and Computing; vol. 786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)
59 Downloads (Pure)

Experimental and Computational Analysis of an Additive Manufactured Vaporization Injector for a Micro-Gas Turbine

Adamou, A., Kennedy, I., Farmer, B., Hussein, A. & Copeland, C., 31 Dec 2019, Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), 12 p. GT2019-90245. (Proceedings of the ASME Turbo Expo; vol. 4A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of a Combined Inverted Brayton and Rankine Cycle

Kennedy, I., Duda, T., Liu, Z., Ceen, B., Jones, A. & Copeland, C., 8 Feb 2019, (Acceptance date) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90767

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling axisymmetric centrifugal compressor characteristics from first principles

Powers, K. H., Brace, C. J., Budd, C. J., Copeland, C. D. & Milewski, P. A., 1 Jan 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), 14 p. GT-2019-90091. (Proceedings of the ASME Turbo Expo; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling Axisymmetric Centrifugal Compressor Characteristics from First Principles

Powers, K., Brace, C., Budd, C., Copeland, C. & Milewski, P., 12 Feb 2019, (Acceptance date) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Validation of a numerical quasi one-dimensional model for wave rotor turbines with curved channels

Tüchler, S. & Copeland, C. D., 22 Jul 2019, Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME), GTP-19-1313. (Proceedings of the ASME Turbo Expo; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Validation of a Numerical Quasi One-Dimensional Model for Wave Rotor Turbines with Curved Channels

Tuechler, S. & Copeland, C., 6 Feb 2019, (Acceptance date) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90868

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2020

A novel air and EGR emulation facility for the optimisation of the powertrain architecture

Orchard, S., Ozturk, U., Evans, N., Duda, T., Chappell, E. & Burke, R., 1 Jan 2020, ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019. U. S. A.: American Society of Mechanical Engineers (ASME), 8 p. ICEF2019-7166, V001T05A003. (ASME 2019 Internal Combustion Engine Division Fall Technical Conference, ICEF 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of a rotary expander as an energy recovery system for a modern Wankel engine

Vorraro, G., Islam, R., Turner, M. & Turner, J., 10 Jan 2020, Internal Combustion Engines and Powertrain Systems for Future Transport 2019: Proceedings of the International Conference on Internal Combustion Engines and Powertrain Systems for Future Transport (ICEPSFT 2019), December 11-12, 2019, Birmingham, UK. 1st ed. CRC Press

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Decarbonization of Transport: Synergies between Hydrogen and Alternative Engine Concepts

Turner, J., 18 Feb 2020, KAUST Research Conference: Transition to Low Carbon Mobility 2020.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
17 Downloads (Pure)

Thermal Profiling of Cooled Radial Turbine Wheel

Pilgrim, C., Zhang, Y., Copeland, C., Scobie, J., Sangan, C., Redwood, A., Karagiannopoulos, S., Castillo, D., Araguás-Rodríguez, S. & Feist, J., 22 Jun 2020, Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. GT2020-14941

Research output: Chapter in Book/Report/Conference proceedingConference contribution