Research Output

Filter
Conference contribution

Validation of a Numerical Quasi One-Dimensional Model for Wave Rotor Turbines with Curved Channels

Tuechler, S. & Copeland, C., 6 Feb 2019, (Acceptance date) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90868

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Validation of a numerical quasi one-dimensional model for wave rotor turbines with curved channels

Tüchler, S. & Copeland, C. D., 22 Jul 2019, Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME), GTP-19-1313. (Proceedings of the ASME Turbo Expo; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsteady performance of a double entry turbocharger turbine with a comparison to steady flow conditions

Copeland, C., Martinez-Botas, R. & Seiler, M., 2008, ASME Turbo Expo 2008: Power for Land, Sea, and Air (GT2008). ASME, p. 1579-1588

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

Thermal Profiling of Cooled Radial Turbine Wheel

Pilgrim, C., Zhang, Y., Copeland, C., Scobie, J., Sangan, C., Redwood, A., Karagiannopoulos, S., Castillo, D., Araguás-Rodríguez, S. & Feist, J., 22 Jun 2020, Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. GT2020-14941

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal management of a low cost range extender for electric vehicles

Agarwal, A., Rodrigues, L., Liu, D., Lewis, A. G. J., Akehurst, S., Brace, C. J., Kirkpatrick, G. & Ash, L., 2016, Proceedings of the 6th Hybrid and Electric Vehicles Conference (HEVC 2016). Institution of Engineering and Technology, p. 16

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

The effect of unequal admission on the performance and loss generation in a double-entry turbocharger turbine

Copeland, C., Newton, P., Martinez-Botas, R. & Seiler, M., 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air (GT2010) . New York, U. S. A.: ASME, p. 1733-1745

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

The effect of divided exhaust period for improved performance in a highly downsized turbocharged gasoline engine

Hu, B., Brace, C., Akehurst, S., Copeland, C. & Turner, J. W. G., 2014, Proceedings of Institution of Mechanical Engineers - 11th International Conference on Turbochargers and Turbocharging. Cambridge, U. K.: Woodhead Publishing Ltd., p. 27-39 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

The effect of advanced combustion control features on the performance of a highly downsized gasoline engine

Lewis, A., Akehurst, S., Brace, C. & Giles, K., 27 Nov 2012, Proceedings of the FISITA 2012 World Automotive Congress. Berlin: Springer, Vol. 189. p. 105-117 12 p. (Lecture Notes in Electrical Engineering; vol. 189).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The effect of advanced combustion control features on the performance of a highly downsized gasoline engine

Giles, K., Lewis, A., Akehurst, S., Chris, B. & Luard, N., 4 Jul 2013, Proceedings of the FISITA 2012 World Automotive Congress. VOL. 1 ed. p. 105-117 13 p. (Lecture Notes in Electrical Engineering; vol. 189 LNEE, no. VOL. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The benefits of an inverted Brayton cycle bottoming cycle as an alternative to turbo-compounding

Copeland, C. D. & Chen, Z., 2015, Proceedings of ASME Turbo Expo: Turbine Technical Conference and Exposition, 2015. Volume 8 - Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. Montreal, Canada: American Society of Mechanical Engineers (ASME), p. V008T23A006 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

The application of energy-based fuel formulae to increase the efficiency relevance and reduce the CO2 emissions of motor sport

Turner, J. W. G. & Pearson, R. J., 1 Dec 2008, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Testing of a Modern Wankel Rotary Engine - Part I: Experimental Plan, Development of the Software Tools and Measurement Systems

Vorraro, G., Turner, M. & Turner, J., 14 Nov 2018, (Acceptance date) SAE International Journal of Engines. 16 p. 2019-01-0075

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation study of divided exhaust period for a two-stage-regulated downsized SI engine

Hu, B., Brace, C., Akehurst, S., Copeland, C. & Turner, J., 2014, SAE Technical Paper. SAE International, 2014-01-2550

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Simulation of exhaust gas residuals in a turbocharged, spark ignition engine

Copeland, C., Gao, X., Freeland, P., Neumeister, J. & Mitcalf, J., 2013, Society of Automotive Engineerings. SAE International, 2013-01-2705

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Sabre: a direct injection 3-cyclinder engine with close-spaced direct injection, swirl- enhanced combustion and complementary technologies

Turner, J. W. G., Coltman, D., Curtis, R., Blake, D., Holland, B., Pearson, R. J., Arden, A. & Nuglisch, H., 2008, Proceedings of JSAE 2008 Congress. p. 5-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Review of turbocharger mapping and 1D modelling inaccuracies with specific focus on two-stage systems

Avola, C., Copeland, C., Duda, T., Burke, R., Akehurst, S. & Brace, C., 2 Jul 2015, SAE 12th International Conference on Engines & Vehicles (ICE), 2015. SAE International, 18 p. 2015-24-2523

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Real-world to Lab – Robust measurement requirements for future vehicle powertrains

Lewis, A., Chappell, E. & Akehurst, S., 28 Jun 2018, 13th International AVL Symposium on Propulsion Diagnostics.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pseudo-causal tracking control of a nonminimum phase system

Wang, P., Sahinkaya, M. N. & Akehurst, S., 12 Oct 2009, Proceedings of the ASME Dynamic Systems and Control Conference 2009, DSCC2009. PART B ed. New York: ASME, p. 1201-1208 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Project sabre: a close-spaced direct injection 3-cylinder engine with synergistic technologies to achieve low CO2 output

Coltman, D., Turner, J. W. G., Curtis, R., Blake, D., Holland, B., Pearson, R. J., Arden, A. & Nuglisch, H., 1 Dec 2008, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Preliminary DoE analysis and control of mapping procedure for a turbocharger on an engine gas stand

Avola, C., Dimitriou, P., Burke, R. & Copeland, C., 2016, ASME Turbo Expo 2016. GT2016-56466

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Predicting the nitrogen oxides emissions of a diesel engine using neural networks

Zhang, Q., Pennycott, A., Burke, R., Akehurst, S. & Brace, C., 14 Apr 2015, SAE Technical Papers. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Practical approach to thermo-dynamic modelling of diesel engine emissions

Burke, R., Fath, B., Akehurst, S., Brace, C., Baumann, W. & Wascheck, R., 2011, Design of Experiments (DoE) in Engine Development,( 6th ed.). Berlin, Germany: Expert Verlag, p. 88-103

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Performance of the automotive turbocharger compressor with various CO 2-air mixtures

Duda, T. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. Vol. 8. 9 p. GT2018-75747

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Performance investigations of a novel rolling traction CVT

Akehurst, S., Brace, C. J., Vaughan, N. D., Milner, P. & Hosoi, Y., 1 Dec 2001, SAE 2001 World Congress, Detroit, Michigan. SAE International, 2001-01-0874. (SAE Technical Papers Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Numerical investigation of two-stage turbocharging systems performance

Avola, C., Copeland, C., Burke, R. & Brace, C., 9 Oct 2016, ASME 2016 Internal Combustion Engine Fall Technical Conference, ICEF 2016. American Society of Mechanical Engineers (ASME), ICEF2016-9449

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Nonlinear Observer-Based Air-Fuel Ratio Control for Port Fuel Injected Wankel Engines

Chen, A. S., Herrmann, G., Na, J., Turner, M., Vorraro, G. & Brace, C., 31 Oct 2018, Proceedings 12th UKACC International Conference on Control, CONTROL 2018. IEEE, p. 224-229

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Multipoint Optimisation of Radial Compressor Using Computational Fluid Dynamics and Genetic Algorithm

Tuechler, S., Chen, Z. & Copeland, C., May 2018, GPPS-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling Axisymmetric Centrifugal Compressor Characteristics from First Principles

Powers, K., Brace, C., Budd, C., Copeland, C. & Milewski, P., 12 Feb 2019, (Acceptance date) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling axisymmetric centrifugal compressor characteristics from first principles

Powers, K. H., Brace, C. J., Budd, C. J., Copeland, C. D. & Milewski, P. A., 1 Jan 2019, Turbomachinery. American Society of Mechanical Engineers (ASME), 14 p. GT-2019-90091. (Proceedings of the ASME Turbo Expo; vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lumped capacitance and 3D CFD conjugate heat transfer modelling of an automotive turbocharger

Burke, R., Copeland, C., Duda, T. & Reyes Belmonte, M. A., 2015, Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, 2015. Volume 8 - Microturbines, Turbochargers and Small Turbomachines; Steam Turbines . American Society of Mechanical Engineers (ASME), p. V008T23A004 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Ionisation and ionisation rate of a two-stroke HCCI engine fuelled with E85 for control feedback

James, K., Chen, R. & Turner, J., 1 Dec 2010, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of mechanical loss and heat transfer in an axial-flux PM machine

Wrobel, R., Vainel, G., Copeland, C., Duda, T., Staton, D. & Mellor, P., 2013, Energy Conversion Congress and Exposition (ECCE), 2013 IEEE . p. 4372-4379

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
11 Citations (Scopus)
141 Downloads (Pure)

Investigation of a Combined Inverted Brayton and Rankine Cycle

Kennedy, I., Duda, T., Liu, Z., Ceen, B., Jones, A. & Copeland, C., 8 Feb 2019, (Acceptance date) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90767

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Inverted Brayton Cycle With Exhaust Gas Condensation

Kennedy, I., Chen, Z., Jones, S., Ceen, B. & Copeland, C., 2017, ASME Turbo Expo 2017 Conference Proceedings. Charlotte, U. S. A.: American Society of Mechanical Engineers (ASME), GT2017-64695

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Improving Heat Transfer and Reducing Mass in a Gasoline Piston using Additive Manufacturing

Copeland, C., Reyes Belmonte, M., Drummond, H., Hopkins, G., Schmieder, A., Bredda, S. W. & Akehurst, S., 2015, SAE Technical Paper. SAE International, 2015-01-0505

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Improving fuel economy in a turbocharged DISI engine already employing integrated exhaust manifold technology and variable valve timing

Turner, J. W. G., Pearson, R. J., Curtis, R. & Holland, B., 1 Dec 2008, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)

Implementing full electric turbocharging systems on highly boosted gasoline engines

Zhang, Q., Lu, P., Dimitriou, P., Akehurst, S., Copeland, C., Zangeneh, M., Richards, B. & Fowler, G., 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition: Volume 8 :Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME), p. V008T26A032 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Further investigations on time-alignment

Bannister, C. D., Hawley, J. G., Brace, C. J., Cox, A., Ketcher, D. & Stark, R., 1 Jan 2004, 2004 SAE World Congress. SAE International, 2004-01-1441. (SAE World Congress & Exhibition; vol. 2004).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Fuel efficiency optimization for a divided exhaust period regulated two-stage downsized SI engine

Hu, B., Akehurst, S., Brace, C., Lu, P., Copeland, C. D. & Turner, J. W. G., Jun 2015, Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. U. S. A.: American Society of Mechanical Engineers (ASME), Vol. 8. p. V008T23A012 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Front End Auxiliary Drive (FEAD) configurations focusing on CO2 benefits

Akehurst, S., Hawley, J. G., Pegg, I. & Piddock, M., 8 Mar 2004, 2004 SAE World Congress. SAE International, 2004-01-0596

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Flex-fuel vehicle development to promote synthetic alcohols as the basis of a potential negative-CO2 energy economy

Turner, J., Peck, A. & Pearson, R. J., 2008, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Extending the supply of alcohol fuels for energy security and carbon reduction

Pearson, R. J., Turner, J. W. G., Eisaman, M. D. & Littau, K. A., 1 Dec 2009, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

16 Citations (Scopus)

Explore and Extend the Effectiveness of Turbo-compounding in a 2.0 litres Gasoline Engine

Lu, P., Brace, C. & Hu, B., 14 Apr 2015, SAE Technical Papers. April ed. SAE International, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Experimental investigation of an inverted Brayton cycle for exhaust gas energy recovery

Kennedy, I., Chen, Z., Ceen, B., Jones, S. & Copeland, C., 4 Oct 2018, Journal of Engineering for Gas Turbines and Power: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. 3 ed. American Society of Mechanical Engineers (ASME), Vol. 141. 11 p. GT2018-75386. (Journal of Engineering for Gas Turbines and Power).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Experimental and Computational Analysis of an Additive Manufactured Vaporization Injector for a Micro-Gas Turbine

Adamou, A., Kennedy, I., Farmer, B., Hussein, A. & Copeland, C., 31 Dec 2019, Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), 12 p. GT2019-90245. (Proceedings of the ASME Turbo Expo; vol. 4A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Estimated total energy transfer over an nedc through steady state performance evaluation

Lewis, A., Brace, C., Akehurst, S., Robinson, K. & Pegg, I., 18 Jul 2013, ASME 2012 Internal Combustion Engine Division Spring Technical Conference, ICES 2012. American Society of Mechanical Engineers (ASME), p. 993-1001 9 p. ICES2012-81192. (Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effects of cooled EGR routing on a second-generation DISI turbocharged engine employing an integrated exhaust manifold

Turner, J. W. G., Pearson, R. J., Curtis, R. & Holland, B., 1 Dec 2009, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Dynamic identification of thermodynamic parameters for turbocharger compressor models

Burke, R., Olmeda, P. & Serrano, J. R., 2014, ASME 2014 Internal Combustion Engine Division Fall Technical Conference (ICEF). American Society of Mechanical Engineers (ASME), Vol. 2. 12 p. V002T06A006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
1 Citation (Scopus)
70 Downloads (Pure)

Driving Style Modelling with Adaptive Neuro-Fuzzy Inference System and Real Driving Data

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 1 Jan 2019, Advances in Human Aspects of Transportation - Proceedings of the AHFE 2018 International Conference on Human Factors in Transportation, 2018. Springer Verlag, p. 481-490 10 p. (Advances in Intelligent Systems and Computing; vol. 786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)
61 Downloads (Pure)

Driving Style Analysis by Classifying Real-World Data with Support Vector Clustering

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 18 Oct 2018, 2018 3rd IEEE International Conference on Intelligent Transportation Engineering, ICITE 2018. IEEE, p. 264-268 5 p. 8492700. (2018 3rd IEEE International Conference on Intelligent Transportation Engineering, ICITE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)