Research Output 1994 2020

Filter
Conference contribution
2019

Application of a rotary expander as an energy recovery system for a modern Wankel engine

Vorraro, G., Islam, R., Turner, M. & Turner, J., 23 Sep 2019, (Accepted/In press) Internal Combustion Engines and Powertrain Systems for Future Transport.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

41 Downloads (Pure)

Driving Style Modelling with Adaptive Neuro-Fuzzy Inference System and Real Driving Data

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 1 Jan 2019, Advances in Human Aspects of Transportation - Proceedings of the AHFE 2018 International Conference on Human Factors in Transportation, 2018. Springer Verlag, p. 481-490 10 p. (Advances in Intelligent Systems and Computing; vol. 786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Fuzzy inference
Railroad cars
Dynamometers
Chassis
Fuzzy logic

Experimental and Computational Analysis of an Additive Manufactured Vaporization Injector for a Micro-Gas Turbine

Adamou, A., Kennedy, I., Farmer, B., Hussei, A. & Copeland, C., 6 Feb 2019, (Accepted/In press) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90245

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of a Combined Inverted Brayton and Rankine Cycle

Kennedy, I., Duda, T., Liu, Z., Ceen, B., Jones, A. & Copeland, C., 8 Feb 2019, (Accepted/In press) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90767

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling Axisymmetric Centrifugal Compressor Characteristics from First Principles

Powers, K., Brace, C., Budd, C., Copeland, C. & Milewski, P., 12 Feb 2019, (Accepted/In press) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90091

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Validation of a Numerical Quasi One-Dimensional Model for Wave Rotor Turbines with Curved Channels

Tuechler, S. & Copeland, C., 6 Feb 2019, (Accepted/In press) Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. GT2019-90868

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Accuracy of diesel engine combustion metrics over the full range of engine operating conditions

Dowell, P. G., Burke, R. D. & Akehurst, S., 1 Jan 2018, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development. American Society of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Adaptive air-fuel ratio control for spark ignition engines with time-varying parameter estimation

Chen, A. S., Na, J., Herrmann, G., Burke, R. & Brace, C., 21 Mar 2018, Proceedings of 2017 9th International Conference On Modelling, Identification and Control, ICMIC 2017. IEEE, Vol. 2018-March. p. 1074-1079 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Time-varying Parameters
Ignition
Internal combustion engines
Parameter estimation
Parameter Estimation
1 Citation (Scopus)

Analysis of different uniflow scavenging options for a medium-duty 2-stroke engine for a U.S. light-truck application

Turner, J., Head, R. A., Wijetunge, R. S., Chang, J., Engineer, N., Blundell, D. W. & Burke, P., 5 Nov 2018, Proceedings of the 2018 ASME Internal Combustion Engines Fall Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scavenging
Trucks
Engines
Pistons
Superchargers

Analysis of the opportunities and trade-offs for an 48V electrified air path

Liu, Y., Vijayakumar, R. & Burke, R., 1 Jan 2018, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T05A007 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressor pressure investigation of surge onset at steady and unsteady operations of an automotive turbocharger

Avola, C., Duda, T., Burke, R. & Copeland, C., May 2018, IMECHE Turbochargers and Turbocharging 2018. Curran Associates, Inc., p. 503-513

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Unsteady flow
Fast Fourier transforms
Pressure sensors

Design of an advanced air path test stand for steady and transient evaluation

Vijayakumar, R., Burke, R., Liu, Y. & Turner, J. W. G., 1 Jan 2018, Emissions Control Systems; Instrumentation, Controls, and Hybrids; Numerical Simulation; Engine Design and Mechanical Development, Volume 2. American Society of Mechanical Engineers (ASME), p. V002T07A004 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of an Air-cooled Radial Turbine Part 1: Computational Modelling

Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., 30 Aug 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, p. 1-13 1 p. GT2018-76378. (Proceedings of the ASME Turbo Expo; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbines
Coolants
Air
Rotors
Wheels

Design of an Air-Cooled Radial Turbine Part 2: Part 2 Experimental Measurements of Heat Transfer

Zhang, Y., Duda, T., Scobie, J., Sangan, C., Redwood, A. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. ASME, Vol. 8. p. 1-12 12 p. GT2018-76384

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbines
Heat transfer
Air
Rotors
Temperature
1 Citation (Scopus)

Driving Style Analysis by Classifying Real-World Data with Support Vector Clustering

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 18 Oct 2018, 2018 3rd IEEE International Conference on Intelligent Transportation Engineering, ICITE 2018. IEEE, p. 264-268 5 p. 8492700. (2018 3rd IEEE International Conference on Intelligent Transportation Engineering, ICITE 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Experimental investigation of an inverted Brayton cycle for exhaust gas energy recovery

Kennedy, I., Chen, Z., Ceen, B., Jones, S. & Copeland, C., 4 Oct 2018, Journal of Engineering for Gas Turbines and Power: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. 3 ed. American Society of Mechanical Engineers (ASME), Vol. 141. 11 p. GT2018-75386. (Journal of Engineering for Gas Turbines and Power).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brayton cycle
Exhaust gases
Recovery
Pressure drop
Turbines

Multipoint Optimisation of Radial Compressor Using Computational Fluid Dynamics and Genetic Algorithm

Tuechler, S., Chen, Z. & Copeland, C., May 2018, GPPS-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Computational fluid dynamics
Genetic algorithms
Electric inductors
Aerodynamics
1 Citation (Scopus)

Nonlinear Observer-Based Air-Fuel Ratio Control for Port Fuel Injected Wankel Engines

Chen, A. S., Herrmann, G., Na, J., Turner, M., Vorraro, G. & Brace, C., 31 Oct 2018, Proceedings 12th UKACC International Conference on Control, CONTROL 2018. IEEE, p. 224-229

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Performance of the automotive turbocharger compressor with various CO 2-air mixtures

Duda, T. & Copeland, C., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. Vol. 8. 9 p. GT2018-75747

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Air
Exhaust gas recirculation
Electric inductors
Centrifugal compressors

Testing of a Modern Wankel Rotary Engine - Part I: Experimental Plan, Development of the Software Tools and Measurement Systems

Vorraro, G., Turner, M. & Turner, J., 14 Nov 2018, (Accepted/In press) SAE International Journal of Engines. 16 p. 2019-01-0075

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017
1 Citation (Scopus)
235 Downloads (Pure)

Distance Estimation by Fusing Radar and Monocular Camera with Kalman Filter

Feng, Y., Pickering, S., Chappell, E., Iravani, P. & Brace, C., 23 Sep 2017, SAE Intelligent and Connected Vehicles Symposium. SAE International, 9 p. 2017-01-1978

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Kalman filters
Radar
Cameras
Radar measurement
Data fusion
1 Citation (Scopus)

Implementing full electric turbocharging systems on highly boosted gasoline engines

Zhang, Q., Lu, P., Dimitriou, P., Akehurst, S., Copeland, C., Zangeneh, M., Richards, B. & Fowler, G., 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition: Volume 8 :Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME), p. V008T26A032 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Engines
Compressors
Turbines
Internal combustion engines
2 Citations (Scopus)

Inverted Brayton Cycle With Exhaust Gas Condensation

Kennedy, I., Chen, Z., Jones, S., Ceen, B. & Copeland, C., 2017, ASME Turbo Expo 2017 Conference Proceedings. Charlotte, U. S. A.: American Society of Mechanical Engineers (ASME), GT2017-64695

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brayton cycle
Exhaust gases
Condensation
Turbines
Coolants
2016
3 Citations (Scopus)

Air-fuel-ratio control of engine system with unknown input observer

Na, J., Herrmann, G., Rames, C., Burke, R. & Brace, C., 7 Nov 2016, 2016 UKACC International Conference on Control, UKACC Control 2016. IEEE, 7737647

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Analysis and comparison of the performance of an inverted brayton cycle and turbo-compounding with decoupled turbine and cvt driven compressor for small automotive engines

Lu, P., Brace, C., Hu, B. & Copeland, C., 2016, Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME), 13 p. GT2016-57675. (Proceedings of the ASME Turbo Expo; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of a Diesel Passenger Car Behavior On-road and over Certification Duty Cycles

Chappell, E., Burke, R., Lu, P., Gee, M. & Williams, R., Oct 2016, SAE Fuels and Lubes 2016. 2016-01-2328

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An improved rate of heat release model for modern high speed diesel engines

Dowell, P. G., Akehurst, S. & Burke, R. D., 1 Jan 2016, ASME 2016 Internal Combustion Engine Fall Technical Conference, ICEF 2016. U. S. A.: American Society of Mechanical Engineers (ASME), p. V001T05a003 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diesel engines
Engines
Fuel injection
Hot Temperature
Hardware
3 Citations (Scopus)

Numerical investigation of two-stage turbocharging systems performance

Avola, C., Copeland, C., Burke, R. & Brace, C., 9 Oct 2016, ASME 2016 Internal Combustion Engine Fall Technical Conference, ICEF 2016. American Society of Mechanical Engineers (ASME), ICEF2016-9449

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Heat transfer
Exhaust gases
Internal combustion engines
Air
1 Citation (Scopus)

Preliminary DoE analysis and control of mapping procedure for a turbocharger on an engine gas stand

Avola, C., Dimitriou, P., Burke, R. & Copeland, C., 2016, ASME Turbo Expo 2016. GT2016-56466

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas engines
Engines
Turbines
Compressors
Powertrains
2 Citations (Scopus)

Thermal management of a low cost range extender for electric vehicles

Agarwal, A., Rodrigues, L., Liu, D., Lewis, A. G. J., Akehurst, S., Brace, C. J., Kirkpatrick, G. & Ash, L., 2016, Proceedings of the 6th Hybrid and Electric Vehicles Conference (HEVC 2016). Institution of Engineering and Technology, p. 16

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric vehicles
Temperature control
Coolants
Engines
Costs
2015

A Numerical Study of the benefits of electrically assisted boosting systems

Burke, R., 8 Nov 2015, A Numerical Study of the benefits of electrically assisted boosting systems.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A throttle loss recovery concept using an expander for a 2.0 litre turbocharged gasoline engine

Lu, P., Hu, B. & Brace, C., 2015, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition: Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Engines
Recovery
Brakes
Pressure drop
2 Citations (Scopus)

Explore and Extend the Effectiveness of Turbo-compounding in a 2.0 litres Gasoline Engine

Lu, P., Brace, C. & Hu, B., 14 Apr 2015, SAE Technical Papers. April ed. SAE International, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Engines
Turbines
Superchargers
Air intakes

Fuel efficiency optimization for a divided exhaust period regulated two-stage downsized SI engine

Hu, B., Akehurst, S., Brace, C., Lu, P., Copeland, C. D. & Turner, J. W. G., Jun 2015, Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. U. S. A.: American Society of Mechanical Engineers (ASME), Vol. 8. p. V008T23A012 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scavenging
Engines
Intake valves
Engine cylinders
Electric sparks
4 Citations (Scopus)

Improving Heat Transfer and Reducing Mass in a Gasoline Piston using Additive Manufacturing

Copeland, C., Reyes Belmonte, M., Drummond, H., Hopkins, G., Schmieder, A., Bredda, S. W. & Akehurst, S., 2015, SAE Technical Paper. SAE International, 2015-01-0505

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Pistons
Gasoline
Heat transfer
Engines
4 Citations (Scopus)

Lumped capacitance and 3D CFD conjugate heat transfer modelling of an automotive turbocharger

Burke, R., Copeland, C., Duda, T. & Reyes Belmonte, M. A., 2015, Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, 2015. Volume 8 - Microturbines, Turbochargers and Small Turbomachines; Steam Turbines . American Society of Mechanical Engineers (ASME), p. V008T23A004 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational fluid dynamics
Capacitance
Heat transfer
Compressors
Turbines
1 Citation (Scopus)

Predicting the nitrogen oxides emissions of a diesel engine using neural networks

Zhang, Q., Pennycott, A., Burke, R., Akehurst, S. & Brace, C., 14 Apr 2015, SAE Technical Papers. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nitrogen oxides
Diesel engines
Neural networks
Engines
Calibration
4 Citations (Scopus)

Review of turbocharger mapping and 1D modelling inaccuracies with specific focus on two-stage systems

Avola, C., Copeland, C., Duda, T., Burke, R., Akehurst, S. & Brace, C., 2 Jul 2015, SAE 12th International Conference on Engines & Vehicles (ICE), 2015. SAE International, 18 p. 2015-24-2523

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Turbines
Engines
Powertrains
Internal combustion engines
9 Citations (Scopus)

The benefits of an inverted Brayton cycle bottoming cycle as an alternative to turbo-compounding

Copeland, C. D. & Chen, Z., 2015, Proceedings of ASME Turbo Expo: Turbine Technical Conference and Exposition, 2015. Volume 8 - Microturbines, Turbochargers and Small Turbomachines; Steam Turbines. Montreal, Canada: American Society of Mechanical Engineers (ASME), p. V008T23A006 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brayton cycle
Turbomachinery
Waste heat utilization
Otto cycle
Exhaust gases
2014
4 Citations (Scopus)

A new turboexpansion concept in a twin-charged engine system

Hu, B., Copeland, C., Brace, C., Akehurst, S., Romagnoli, A., Martinez-Botas, R. & Turner, J., 13 Oct 2014, SAE Technical Paper. SAE International, 2014-01-2596

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Superchargers
Turbines
Compressors
Temperature
8 Citations (Scopus)

Assessment of supercharging boosting component for heavily downsized gasoline engines

Romagnoli, A., Wan-Salim, W. S. I., Gurunathan, B. A., Martinez-Botas, R. F., Turner, J. W. G., Luard, N., Jackson, R., Matteucci, L., Copeland, C., Akehurst, S., Lewis, A. G. J. & Brace, C. J., 1 Jan 2014, Institution of Mechanical Engineers - 11th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Ltd., p. 13-26 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Engines
Superchargers
Powertrains
Supercharging

Assessment of the supercharging boosting component for heavily downsized gasoline engines

Copeland, C., Romagnoli, A., Wan-Salim, W. B., Gurunathan, B., Martinez-Botas, R., Turner, J., Luard, N., Jackson, R., Matteucci, L., Brace, C., Akehurst, S. & Lewis, A., 2014, IMECHE Turbocharger and Turbocharging Proceedings, 2014. IMechE Conference Transactions

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Engines
Superchargers
Powertrains
Supercharging
1 Citation (Scopus)
42 Downloads (Pure)

Dynamic identification of thermodynamic parameters for turbocharger compressor models

Burke, R., Olmeda, P. & Serrano, J. R., 2014, ASME 2014 Internal Combustion Engine Division Fall Technical Conference (ICEF). American Society of Mechanical Engineers (ASME), Vol. 2. 12 p. V002T06A006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
Compressors
Identification (control systems)
Thermodynamics
Heat transfer coefficients
Temperature measurement
2 Citations (Scopus)

Simulation study of divided exhaust period for a two-stage-regulated downsized SI engine

Hu, B., Brace, C., Akehurst, S., Copeland, C. & Turner, J., 2014, SAE Technical Paper. SAE International, 2014-01-2550

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Turbines
Combustion knock
Scavenging
Pipe
5 Citations (Scopus)

The effect of divided exhaust period for improved performance in a highly downsized turbocharged gasoline engine

Hu, B., Brace, C., Akehurst, S., Copeland, C. & Turner, J. W. G., 2014, Proceedings of Institution of Mechanical Engineers - 11th International Conference on Turbochargers and Turbocharging. Cambridge, U. K.: Woodhead Publishing Ltd., p. 27-39 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Engines
Scavenging
Engine cylinders
Torque
2013
4 Citations (Scopus)

A method of map extrapolation for unequal and partial admission in a double entry turbine

Newton, P., Romagnoli, A., Martinez-Botas, R., Copeland, C. & Seiler, M., 2013, Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition. San Antonio, U. S. A., Vol. 6 C. p. V06CT40A024 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrapolation
Turbines
Intake systems
1 Citation (Scopus)

Control strategy study of the series sequential turbocharging using 1-D simulation

Zhang, Q., Brace, C., Akehurst, S., Burke, R., Capon, G., Smith, L., Garrett, S. & Zhang, K., 2013, ASME Turbo Expo, 2013: Turbine Technical Conference and Exposition. San Antonio, U. S. A.: ASME, Vol. 5A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robust control
Diesel engines
Engines
1 Citation (Scopus)

Estimated total energy transfer over an nedc through steady state performance evaluation

Lewis, A., Brace, C., Akehurst, S., Robinson, K. & Pegg, I., 18 Jul 2013, ASME 2012 Internal Combustion Engine Division Spring Technical Conference, ICES 2012. American Society of Mechanical Engineers (ASME), p. 993-1001 9 p. ICES2012-81192. (Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)
93 Downloads (Pure)

Investigation of mechanical loss and heat transfer in an axial-flux PM machine

Wrobel, R., Vainel, G., Copeland, C., Duda, T., Staton, D. & Mellor, P., 2013, Energy Conversion Congress and Exposition (ECCE), 2013 IEEE . p. 4372-4379

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)

Simulation of exhaust gas residuals in a turbocharged, spark ignition engine

Copeland, C., Gao, X., Freeland, P., Neumeister, J. & Mitcalf, J., 2013, Society of Automotive Engineerings. SAE International, 2013-01-2705

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engine cylinders
Exhaust gases
Internal combustion engines
Engines
Combustion knock