Research Output 2001 2019

Filter
Paper
2019

An investigation of mandrel-free spinning

Jawale, K. & Loukaides, E., 2019, (Accepted/In press).

Research output: Contribution to conferencePaper

The effect of an edge roller in mandrel-free spinning

Jawale, K. & Loukaides, E., 2019, (Accepted/In press).

Research output: Contribution to conferencePaper

2018
1 Citation (Scopus)
Composite materials
Carbon fibers
Laminates
Materials properties
Skin
2017

Effect of interlaminar toughening layers on the diaphragm forming quality of carbon/epoxy prepreg

Wang, W. T., Yu, H., Potter, K. D. & Kim, B. C., 1 Jan 2017.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
bolts
structural health monitoring
piezoelectric transducers
cross correlation
excitation

Non-linear Control of a Piezoelectric Two Stage Servovalve

Persson, L., Plummer, A., Bowen, C. & Elliott, P., Jun 2017.

Research output: Contribution to conferencePaper

Open Access
File
Hysteresis
Reels
Torque motors
Controllers
Step response

The effect of ply blocking on near-edge impact damage mechanisms

Hua, S., Dubary, N., Bouvet, C. & Rhead, A. T., 1 Jan 2017. 12 p.

Research output: Contribution to conferencePaper

Open Access
2016

A calibrated UV LED light source for photocatalytic experimentation

Sergejevs, A., Clarke, C., Allsopp, D., Marugan, J. & Bowen, C., 12 May 2016, (Unpublished).

Research output: Contribution to conferencePaper

File
Light emitting diodes
Light sources
Photocatalysis
Photocatalysts
Titanium dioxide

Additive manufacturing for next generation actuation

Guerrier, P. & Bowen, C., 2016.

Research output: Contribution to conferencePaper

3D printers
Actuators
Metals
Hydraulics
Machine design

An automated image processing algorithm to determine wrinkle characteristics form B-scans

Sandhu, A., Dodwell, T. & Butler, R., 2016.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Efficient Modelling and Accurate Certification of Curved Aerospace Laminates

Fletcher, T., Reinarz, A., Dodwell, T., Butler, R., Scheichl, R. & Newley, R., 2016.

Research output: Contribution to conferencePaper

Ply-By-Ply Delamination Morphology In Composite Laminates Under Low-Velocity Impact

Pernice, M. F. & Rhead, A., Jun 2016.

Research output: Contribution to conferencePaper

Open Access
File
Delamination
Laminates
Composite materials
Fiber reinforced materials
Electron energy levels
1 Citation (Scopus)

The influence of fibre angle and resin properties on consolidation of curved laminates

Johnson, K., Erland, S. & Butler, R., 2016.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Ultrasonic edge waves for damage detection in composite plate stiffeners

Chu, J. & Courtney, C., 20 Sep 2016. 4 p.

Research output: Contribution to conferencePaper

2015
4 Citations (Scopus)

Design and Modelling of a Novel Servovalve Actuated by a Piezoelectric Ring Bender

Persson, L., Plummer, A., Bowen, C. & Brooks, I., Oct 2015.

Research output: Contribution to conferencePaper

Reels
Actuators
Mathematical models
Hydraulic fluids
Step response

Minimum mass laminate design for uncertain in-plane loading

Nielsen, M., Rhead, A. & Butler, R., 19 Jul 2015. 12 p.

Research output: Contribution to conferencePaper

Open Access
File
Laminates
Stiffness
3 Citations (Scopus)

X-ray computed tomography of damage formation under in-situ loading

Sandhu, A. & Rhead, A., 19 Jul 2015. 12 p.

Research output: Contribution to conferencePaper

File
Laminates
Tomography
X rays
Delamination
Peeling
2014

Artificial ligamentous joints: Methods, materials and characteristics

Hockings, N., Iravani, P. & Bowen, C., Nov 2014. 7 p.

Research output: Contribution to conferencePaper

File
Thermoplastics
Printing
Welding
Animals
Robotics

Heat transfer simulation and experimental study of bamboo in the radial direction

Huang, P., Chang, W. S., Ansell, M. P., Chew, J., Shea, A., Zeidler, A. & Pickering, S., 1 Jan 2014.

Research output: Contribution to conferencePaper

bamboo
bamboos
heat transfer
experimental study
Phyllostachys edulis

Investigation of failure modes in impact damaged steered fibre laminates

Rhead, A., Koisin, V. & Butler, R., 7 Oct 2014.

Research output: Contribution to conferencePaper

File
Shearing
Failure modes
Laminates
Fibers
Compression testing

Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetric bistable laminates

Harris, P., Bowen, C., Betts, D. & Kim, A., Sep 2014.

Research output: Contribution to conferencePaper

File
3 Citations (Scopus)

Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetrie bistable laminates

Harris, P., Bowen, C. & Kim, H. A., 2014.

Research output: Contribution to conferencePaper

Harvesters
Laminates
Natural frequencies
Piezoelectric materials
Energy harvesting

Novel model for arbitrary shape bistable piezoelectric-composite plates for vibration-based energy harvesting

Betts, D., Bowen, C. R., Inman, D. J. & Kim, H. A., 2014.

Research output: Contribution to conferencePaper

Performance of thin film polyvinylidenefluoride (PVDF) for pyroelectric energy harvesting

Zabek, D., Taylor, J. & Bowen, C. R., 2014, p. 1-4.

Research output: Contribution to conferencePaper

waste heat
thin films
thermal energy
temperature profiles
grade
2013
Ultrasonics
Fatigue of materials
Elastic waves
Spectroscopy
Cracks
7 Citations (Scopus)

Compression after impact strength of a buckling resistant, tow steered panel

Rhead, A., Butler, R., Liu, W., Kim, B. C. & Hallett, S., 28 Jul 2013. 10 p.

Research output: Contribution to conferencePaper

File
Impact strength
Shearing
Buckling
Laminates
Fibers
Composite structures
Ultrasonics
Acoustics
Power spectral density
Method of moments
6 Citations (Scopus)

Role of domain orientations in forming the hydrostatic performance of novel 2-2 single crystal/polymer composites

Topolov, V. Y., Bowen, C. R. & Krivoruchko, A. V., 2013. 16 p.

Research output: Contribution to conferencePaper

hydrostatics
composite materials
single crystals
polymers
elastic anisotropy
2012

Analytic study of circular ultrasonic particle manipulation device

Grinenko, A., Wilcox, P. D., Courtney, C. R. P. & Drinkwater, B. W., 7 Oct 2012.

Research output: Contribution to conferencePaper

A variational model for the wrinkling of carbon fiber composites during consolidation

Dodwell, T., Butler, R. & Hunt, G. W., 2012.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Buckling optimization of variable angle tow panels using exact strip models

Liu, W., Butler, R. & Kim, H. A., 2012.

Research output: Contribution to conferencePaper

Buckling
Boundary conditions
Shearing
Shear deformation
Fibers

Direct calculation of acoustic radiation force by finite difference time domain method

Grinenko, A., Wilcox, P. D., Courtney, C. R. P. & Drinkwater, B. W., 7 Oct 2012.

Research output: Contribution to conferencePaper

16 Citations (Scopus)

Growth of damage in additively manufactured metal-composite joints

Parkes, P. N., Butler, R. & Almond, D. P., 2012.

Research output: Contribution to conferencePaper

Ultrasonic waves
Load limits
Joining
Laminates
Shear stress

Manipulation of microparticles using circular ultrasonic arrays

Courtney, C. R. P., Demore, C., Grinenko, A., Drinkwater, B. W., Ong, C. . K., Wilcox, P. D. & Cochran, S., 7 Oct 2012.

Research output: Contribution to conferencePaper

Performance Optimization of a Two-stage Piezohydraulic Servovalve

Sangiah, D., Plummer, A. R. & Bowen, C. R., Mar 2012.

Research output: Contribution to conferencePaper

1 Citation (Scopus)

The effect of tow gaps on compression after impact strength of AFP laminates

Rhead, A. T., Dodwell, T. J. & Butler, R., 2012.

Research output: Contribution to conferencePaper

Impact strength
Delamination
Laminates
Compaction
Impact testing
2011

Acoustic-radiation-force manipulation of microparticles using phase-controllable ultrasonic standing waves

Courtney, C. R. P., Ong, C., Demore, C., Glynne-jones, P., Drinkwater, B. W., Bernassau, A. L., Cochran, S., Hill, M., Wilcox, P. D. & Cumming, D. R. S., 2011.

Research output: Contribution to conferencePaper

A vortex valve for flow control in fluid systems

Sangiah, D., Plummer, A. R., Bowen, C. R. & Guerrier, P., May 2011, p. 241. 253 p.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Damage Resistance and Damage Tolerance of Hybrid Carbon-Glass Laminates

Rhead, A., Hua, S. & Butler, R., 11 Apr 2011. 12 p.

Research output: Contribution to conferencePaper

File
Damage tolerance
Laminates
Carbon fiber reinforced plastics
Glass
Carbon

Manipulation of microparticles in two dimensions using counterpropagating ultrasonic waves

Courtney, C. R. P., Ong, C. . K., Drinkwater, B. W. & Wilcox, P. D., 2011.

Research output: Contribution to conferencePaper

7 Citations (Scopus)

Modelling and experimental validation of a novel piezohydraulic servovalve

Sangiah, D., Plummer, A. R., Bowen, C. R. & Guerrier, P., Oct 2011.

Research output: Contribution to conferencePaper

The effect of poling on the in vitro response to poled HA and HABT composites for clinical applications

Turner, I. G., Bowen, C. R., Baxter, F. R., Gittings, J. & Chaudhuri, J. B., 2011.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

The influence of fibre angle on the compressive strength of delaminated surface plies

Rhead, A., Butler, R. & Baker, N., 21 Aug 2011. 10 p.

Research output: Contribution to conferencePaper

File
Compressive strength
Laminates
Delamination
Fibers
Poisson ratio
2010

A hierarchical multiscale plate model for the efficient simulation of composite laminates

Angioni, S., Visrolia, A. & Meo, M., Jun 2010.

Research output: Contribution to conferencePaper

Laminates
Composite materials

A hierarchical XFEM plate model for the simulation of composite laminates failure

Visrolia, A., Angioni, S. L. & Meo, M., May 2010.

Research output: Contribution to conferencePaper

Buckling, propagation and stability of delaminated anisotropic layers

Rhead, A. & Butler, R., 7 Jul 2010. 10 p.

Research output: Contribution to conferencePaper

File
delamination
buckling
methodology
compression
damage
12 Citations (Scopus)

Structural response of laminated composite plates to blast load

Dolce, F. & Meo, M., Oct 2010.

Research output: Contribution to conferencePaper

2009
1 Citation (Scopus)

A coupled field finite element model to predict actuation properties of piezoelectrically actuated bistable composites

Giddings, P., Bowen, C. & Kim, H. A., Jul 2009.

Research output: Contribution to conferencePaper

Composite materials
Piezoelectric actuators
Laminates
Materials properties

A new smart multifunctional polymer nanocomposites layer for the detection of low velocity impact damage in composite structures

Carotenuto, G., Meo, M. & Milella, E., Jul 2009.

Research output: Contribution to conferencePaper