Research Output 2001 2019

Filter
Chapter
2019

Piezo-active composites: Classification and effective physical properties

Khanbareh, H., Topolov, V. Y. & Bowen, C. R., 26 May 2019, Piezo-Particulate Composites. Khanbareh, H., Topolov, V. Y. & Bowen, C. (eds.). Springer Verlag, p. 1-23 23 p. (Springer Series in Materials Science; vol. 283).

Research output: Chapter in Book/Report/Conference proceedingChapter

Preface

Khanbareh, H., Topolov, V. Y. & Bowen, C. R., 26 May 2019, Piezo-Particulate Composites. Khanbareh, H., Topolov, V. Y. & Bowen, C. (eds.). Springer Verlag, Vol. 283. p. vii-ix (Springer Series in Materials Science).

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
2018

Optimum design and damage tolerance of compressively loaded laminates

Butler, R., Rhead, A. & Dodwell, T., 1 Jan 2018, Comprehensive Composite Materials II. 2nd ed ed. Elsevier Academic Press Inc, Vol. 8-8. p. 118-135 18 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2017

Linear PID control design

Du, C., Johnston, N., Manring, N. D., Plummer, A., Semini, C., Yang, M. & Yu, T., 1 Jan 2017, Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering. Guo, Q. & Jiang, D. (eds.). U. S. A.: CRC Press, p. 17-44 28 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Three term control systems
System stability
Hydraulics
Bandwidth
Controllers
2016
2 Citations (Scopus)

New effects in 1–3-type composites based on relaxor-ferroelectrics single crystals

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 2 Jan 2016, Advanced Materials: Manufacturing, Physics, Mechanics and Applications. PArinov, I. A., Chang, S-H. & Topolov, V. Y. (eds.). Springer Science and Business Media, LLC, p. 179-195 17 p. (Springer Proceedings in Physics; vol. 175).

Research output: Chapter in Book/Report/Conference proceedingChapter

composite materials
single crystals
hydrostatics
ceramics
matrices

Photocatalytic Properties of Commercially Available TiO2 Powders for Pollution Control

Nuño, M., Ball, R. & Bowen, C., Aug 2016, Nanotechnology and Nanomaterials "Semiconductor Photocatalysis - Materials, Mechanisms and Applications". p. 613 23 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
File
Pollution control
Powders
Polymorphism
Energy gap
Coloring Agents
2015

Nonlinear Damage Detection and Localisation Using a Time Domain Approach

Boccardi, S., Calla, D. B., Malfense-Fierro, G-P., Ciampa, F. & Meo, M., 2015, Structural Health Monitoring 2015.

Research output: Chapter in Book/Report/Conference proceedingChapter

2014
1 Citation (Scopus)

Acoustic emission sensors for assessing and monitoring civil infrastructures

Meo, M., 1 Apr 2014, Sensor Technologies for Civil Infrastructures: Sensing Hardware and Data Collection Methods for Performance Assessment. Wang, M. L., Lynch, J. P. & Sohn, H. (eds.). Cambridge, U. K.: Woodhead Publishing Ltd., Vol. 1. p. 159-178 20 p. (Woodhead Publishing Series in Electronic and Optical Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

Acoustic emissions
Monitoring
Sensors
Acoustic emission testing
Structural health monitoring
3 Citations (Scopus)

Buckling and compressive strength of laminates with optimized fibre-steering and layer-stacking for aerospace applications

Butler, R., Sep 2014, Polymer Composites in the Aerospace Industry. Irving, P. & Soutis, C. (eds.). Oxford, U. K.: Elsevier, p. 77-97 21 p. (Woodhead Publishing Series in Composites).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace applications
Compressive strength
Laminates
Buckling
Damage tolerance
3 Citations (Scopus)

Design, fabrication, and validation of passive wireless resonant sensors for NDT/SHM

Iervolino, O., Jenks, C. H. & Meo, M., 1 Jan 2014, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9063.

Research output: Chapter in Book/Report/Conference proceedingChapter

File
Structural health monitoring
Nondestructive examination
Fabrication
Sensors
Smart sensors

Dielectric Elastomer based active layer for macro-scaled industrial application in roto-flexographic printing

Pinto, F., D'Oriano, G. & Meo, M., 8 Mar 2014, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, Vol. 9056. 90563G

Research output: Chapter in Book/Report/Conference proceedingChapter

File
Elastomers
Industrial applications
Macros
Printing
Actuators
3 Citations (Scopus)

Nonlinear acoustic and ultrasound methods for assessing and monitoring civil infrastructures

Meo, M., 1 Apr 2014, Sensor Technologies for Civil Infrastructures: Sensing Hardware and Data Collection Methods for Perfomance. Wang, M. L., Lynch, J. P. & Sohn, H. (eds.). Cambridge, U. K.: Woodhead Publishing Ltd., Vol. 1. p. 179-200 22 p. (Woodhead Publishing Series in Electronic and Optical Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

ultrasonics
acoustics
frequency response
maintenance
harmonic generations
14 Citations (Scopus)

Nonlinear damage detection in composite structures using bispectral analysis

Ciampa, F., Pickering, S., Scarselli, G. & Meo, M., 1 Jan 2014, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9064.

Research output: Chapter in Book/Report/Conference proceedingChapter

File
Damage detection
Composite structures
Ultrasonics
Aerospace engineering
Guided electromagnetic wave propagation
3 Citations (Scopus)

Nonlinear Elastic Tomography using sparse array measurements

Ciampa, F., Scarselli, G., Pickering, S., Meo, M. & Gianpiccolo, A., 2014, 7th European Workshop on Structural Health Monitoring.

Research output: Chapter in Book/Report/Conference proceedingChapter

File
2013
2 Citations (Scopus)

Manipulation of microspheres and microbubbles in an octagonal sonotweezers

Bernassau, A. L., Courtney, C. R. P., Beeley, J., Drinkwater, B. W. & Cumming, D. R. S., 21 Jul 2013, IEEE International Ultrasonics Symposium, IUS, 2013. p. 1903-1906 4 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

manipulators
transducers
phase control
acoustics
piezoelectric transducers
2012
4 Citations (Scopus)

Modelling ultrasonic-transducer performance: one-dimensional models

Cochran, S., Demore, C. & Courtney, C., 2012, Ultrasonic transducers: Materials and design for sensors, actuators and medical applications. Nakamura, K. (ed.). Woodhead Publishing Ltd., p. 185-219

Research output: Chapter in Book/Report/Conference proceedingChapter

2011

Acoustic emission localization in a composite stiffened panel using a time reversal algorithm

Ciampa, F. & Meo, M., 2011, Composite Science and Technology. Zurich-Durnten: Trans Tech Publications, Vol. 471-472. p. 910-915 6 p. (Key Engineering Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

File
acoustic emission
point impact
composite materials
structural health monitoring
transducers
3 Citations (Scopus)

Impact damage detection in a stiffened composite wing panel using digital shearography and thermosonics

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. & Polimeno, U., 2011, Composite Science and Technology. Zurich-Durnten: Trans Tech Publications, Vol. 471-472. p. 904-909 6 p. (Key Engineering Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

Damage detection
Delamination
Composite materials
Defects
Infrared imaging

Modelling Wave Propagation in Nonlinear Elastic Solids

Meo, M., 2011, Computational Methods in Nonlinear Acoustics: Current Trends. Vanhille, C. & Campos-Pozuelo, C. (eds.). Transworld Research Network

Research output: Chapter in Book/Report/Conference proceedingChapter

2010

Buckling and propagation of a delaminated composite beam in bending

Kinawy, M., Butler, R. & Hunt, G. W., 2010, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2010: Collection of Technical Papers. American Institute of Aeronautics and Astronautics

Research output: Chapter in Book/Report/Conference proceedingChapter

buckling
moments
composite materials
propagation
fatigue tests
3 Citations (Scopus)

Compression after impact modeling of damage tolerant composite laminates

Baker, N. & Butler, R., 2010, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston, VA.: American Institute of Aeronautics and Astronautics

Research output: Chapter in Book/Report/Conference proceedingChapter

Laminates
Damage tolerance
Compaction
Impact strength
Composite materials
1 Citation (Scopus)

High performance of advanced composites based on relaxor-ferroelectric single crystals

Topolov, V. Y., Bowen, C. R. & Glushanin, S. V., 2010, Piezoceramic Materials and Devices. Nova Science Publishers, p. 71-112 42 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

composite materials
single crystals
polymers
solid solutions
hydrophones
3 Citations (Scopus)

Modelling and optimisation of a sapphire/GaN-based diaphragm structure for pressure sensing in harsh environments

Edwards, M. J., Vittoz, S., Amen, R., Rufer, L., Johander, P., Bowen, C. R. & Allsopp, D. W. E., Oct 2010, Conference Proceedings - The 18th International Conference on Advanced Semiconductor Devices and Microsystems, ASDAM 2010. Piscataway, NJ: IEEE, p. 127-130 4 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Diaphragms
Sapphire
Sensors
High electron mobility transistors
Pressure sensors

The influence of mechanical stress on piezoceramic tubes

Lewis, R. W. C., Merrick, A. J., Dent, A. C. E. & Bowen, C. R., 2010, 2010 IEEE International Symposium on the Applications of Ferroelectrics. New York: IEEE

Research output: Chapter in Book/Report/Conference proceedingChapter

Piezoelectric devices
Actuators
Lead
Engineers
Sensors
2009
5 Citations (Scopus)

An implantable electronic system for in-vivo stability evaluation of prosthesis in Total Hip and Knee Arthroplasty

Hao, S., Taylor, J., Miles, A. & Bowen, C., May 2009, I2MTC: 2009 IEEE Instrumentation & Measurement Technology Conference. New York: IEEE, p. 171-176 6 p. (IEEE Instrumentation and Measurement Technology Conference).

Research output: Chapter in Book/Report/Conference proceedingChapter

Arthroplasty
Calibration
Prostheses and Implants

Electrode ablation on piezoelectric ceramics by NS-pulsed laser ablation for sensor applications

Kloss, S., Lewis, R. W. C., Dent, A., Weston, N., Jonas, K., Bowen, C. R., Hand, D. P. & Shephard, J. D., Nov 2009, ICALEO 2009 - 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings. Orlando: Laser Institute of America, Vol. 102. p. 1194-1203 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

piezoelectric ceramics
laser ablation
ablation
pulsed lasers
electrodes

Electromechanical properties of hydroxyapatite / BaTiO3 composites

Bowen, C. R., Topolov, V. Y. & Dent, A. C. E., 2009, ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials, 7 p. (ICCM International Conferences on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

ceramics
composite materials
manufacturing
permittivity
coefficients

Performance of novel piezo-active- composites based on relaxor-ferroelectric single crystals

Topolov, V. Y., Bowen, C. R., Bisegna, P. & Krivoruchko, A. V., 2009, ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials, (ICCM International Conferences on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

composite materials
single crystals
polymers
3 Citations (Scopus)

Structural response of laminated composite plates to blast load

Dolce, F., Meo, M., Wright, A. & French, M., Jul 2009, ICCM-17 - 17th International Conference on Composite Materials. 2009. Piscataway, U. S. A.: International Committee on Composite Materials, (ICCM International Conferences on Composite Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

Carbon fiber reinforced plastics
Laminated composites
Composite materials
2008

Optimisation of stiffened panels using finite strip models

Butler, R. & Liu, W., 2008, Buckling and postbuckling structures. Falzon, B. G. & Aliabadi, M. H. (eds.). London: Imperial College Press

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)

Piezoelectric composites based on hydroxyapatite/barium titanate

Bowen, C. R., Raman, K. V. S. & Topolov, Y. Y., 2008, CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Smart Materials and Micro/Nanosystems. Vincenzini, P. & D'Arrigo, G. (eds.). Trans Tech Publications, Vol. 54. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

barium
composite materials
ceramics
physical factors
laminates
17 Citations (Scopus)

Polarisation behaviour of calcium phosphate based ceramics

Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. R. & Chaudhuri, J. B., 2008, Advanced Materials Forum IV: Materiais 2007. Marques, A. T., Silva, A. F., Baptista, A. P. M., Sá, C., Alves, F. J. L., Malheiros, L. F. & Vieira, M. (eds.). Zurich: Trans Tech Publications, p. 91-95 5 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

ceramics
polarization
calcium
phosphate
water vapor

Progress in porous piezoceramics

Ramesh, R., Kara, H., Stevens, R. & Bowen, C., 2008, Developments in Ceramic Materials Research. Rosslere, D. (ed.). Nova Publishers, p. 211-240 30 p.

Research output: Chapter in Book/Report/Conference proceedingChapter