Research Output 1988 2019

2014
18 Citations (Scopus)

Bio-inspired structural bistability employing elastomeric origami for morphing applications

Daynes, S., Trask, R. S. & Weaver, P. M., 1 Dec 2014, In : Smart Materials and Structures. 23, 12, 125011.

Research output: Contribution to journalArticle

Silicone Elastomers
Geometry
cells
actuation
Silicones

Biomass fly ash as precursor for alkali-activated materials

Bernal, S. A., Mundra, S., Hussein, O. H., Ball, R., Heath, A. & Provis, J. L., 2014, Workshop in Waste Cementation, Sheffield, UK, September 17 2014. Book of proceeding of 34th Annual Conference on Cement and Concrete Science, Sheffield, UK..

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Buckling and compressive strength of laminates with optimized fibre-steering and layer-stacking for aerospace applications

Butler, R., Sep 2014, Polymer Composites in the Aerospace Industry. Irving, P. & Soutis, C. (eds.). Oxford, U. K.: Elsevier, p. 77-97 21 p. (Woodhead Publishing Series in Composites).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace applications
Compressive strength
Laminates
Buckling
Damage tolerance
23 Citations (Scopus)
63 Downloads (Pure)

Complex response of a bistable laminated plate: Multiscale entropy analysis

Borowiec, M., Rysak, A., Betts, D. N., Bowen, C. R., Kim, H. A. & Litak, G., Oct 2014, In : European Physical Journal Plus. 129, 211, p. 1-7 7 p.

Research output: Contribution to journalArticle

Open Access
File
dynamic response
laminates
entropy
harmonic excitation
broadband

Damage control within skin-stiffener debond specimens under fatigue conditions

Luterbacher, R., Trask, R. S. & Bond, I. P., 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stringers
Fatigue damage
Delamination
Thermoplastics
Skin
3 Citations (Scopus)
65 Downloads (Pure)

Design, fabrication, and validation of passive wireless resonant sensors for NDT/SHM

Iervolino, O., Jenks, C. H. & Meo, M., 1 Jan 2014, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9063.

Research output: Chapter in Book/Report/Conference proceedingChapter

File
Structural health monitoring
Nondestructive examination
Fabrication
Sensors
Smart sensors
1 Citation (Scopus)

Designing for damage tolerance

Rhead, A. T. & Butler, R., Apr 2014, In : JEC Composites Magazine. 51, 88, p. 57-61 5 p.

Research output: Contribution to journalArticle

Damage tolerance
Aircraft
Delamination
Buckling
15 Citations (Scopus)
68 Downloads (Pure)

Detection and Modelling of Nonlinear Elastic Response in Damaged Composite Structures

Ciampa, F., Onder, E., Barbieri, E. & Meo, M., Dec 2014, In : Journal of Nondestructive Evaluation. 33, 4, p. 515-521 7 p.

Research output: Contribution to journalArticle

File
Composite structures
Wave propagation
Cracks
Ultrasonic waves
Harmonic generation
69 Downloads (Pure)

Dielectric Elastomer based active layer for macro-scaled industrial application in roto-flexographic printing

Pinto, F., D'Oriano, G. & Meo, M., 8 Mar 2014, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, Vol. 9056. 90563G

Research output: Chapter in Book/Report/Conference proceedingChapter

File
Elastomers
Industrial applications
Macros
Printing
Actuators
3 Citations (Scopus)
85 Downloads (Pure)

Elastic properties of thermo-hydro-mechanically modified bamboo (Guadua angustifolia Kunth) measured in tension

Archila Santos, H. F., Ansell, M. P. & Walker, P., Mar 2014, In : Key Engineering Materials. 600, p. 111-120 10 p.

Research output: Contribution to journalArticle

Open Access
File
Bamboo
Poisson ratio
Elastic moduli
Mechanical properties
Water

Embedded catalytic healing agents for the repair of fibre-reinforced composites

Everitt, D., Trask, R., Wass, D. & Bond, L., 2014, ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2014. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Repair
Fibers
Composite materials
Curing
Epoxy Compounds

Failure analysis of impact-damaged/hygrothermally aged fiber-reinforced polymer matrix composite joints subjected to bend loading

Tarpani, J. R., Castro, C. E. G., Pickering, S. G. & Almond, D. P., 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polymer matrix composites
Failure analysis
Aging of materials
Stiffness
Thermoplastics
2 Citations (Scopus)
74 Downloads (Pure)

Finite element analysis of the microstructure of AlN-TiN composites

Patel, S., Vaish, R., Sinha, N. & Bowen, C. R., Jun 2014, In : Strain. 50, 3, p. 250-261 11 p.

Research output: Contribution to journalArticle

File
Finite element method
Microstructure
Composite materials
Compressive stress
Thermal stress

Heat transfer simulation and experimental studies of bamboo in radial direction

Huang, P., Chang, W-S., Ansell, M., Chew, J., Shea, A., Zeidler, A. & Pickering, S., 2014.

Research output: Contribution to conferencePaper

Heat transfer simulation and experimental study of bamboo in the radial direction

Huang, P., Chang, W. S., Ansell, M. P., Chew, J., Shea, A., Zeidler, A. & Pickering, S., 1 Jan 2014.

Research output: Contribution to conferencePaper

bamboo
bamboos
heat transfer
experimental study
Phyllostachys edulis
15 Citations (Scopus)
47 Downloads (Pure)

Impact localization on a composite tail rotor blade using an inverse filtering approach

Ciampa, F. & Meo, M., 1 Oct 2014, In : Journal of Intelligent Material Systems and Structures. 25, 15, p. 1950-1958 9 p.

Research output: Contribution to journalArticle

File
Structural health monitoring
Composite structures
Airfoils
Green's function
Imaging systems
79 Citations (Scopus)
48 Downloads (Pure)

Independent trapping and manipulation of microparticles using dexterous acoustic tweezers

Courtney, C. R. P., Demore, C. E. M., Wu, H., Grinenko, A., Wilcox, P. D., Cochran, S. & Drinkwater, B. W., 14 Apr 2014, In : Applied Physics Letters. 104, 15, p. 1-4 4 p., 154103.

Research output: Contribution to journalArticle

Open Access
microparticles
manipulators
trapping
acoustics
Bessel functions
42 Downloads (Pure)

In situ monitoring of pH changes in concrete and lime mortars

Pesce, G., Ball, R., Serrapede, M. & Denuault, G., 14 Sep 2014, p. 105-108.

Research output: Contribution to conferencePaper

File
mortar
palladium
lime
alkaline environment
substrate
5 Citations (Scopus)

Inter and intra-ply shearing of uncured carbon fibre laminates

Erland, S., Dodwell, T. J. & Butler, R., 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shearing
Carbon fibers
Laminates
Friction
Temperature
22 Downloads (Pure)

Investigation of failure modes in impact damaged steered fibre laminates

Rhead, A., Koisin, V. & Butler, R., 7 Oct 2014.

Research output: Contribution to conferencePaper

File
Shearing
Failure modes
Laminates
Fibers
Compression testing
2 Citations (Scopus)
19 Downloads (Pure)

Investigation of geometries of bistable piezoelectric-laminate plates for vibration-based energy harvesting

Betts, D. N., Bowen, C. R., Inman, D. J., Weaver, P. M. & Kim, H. A., 1 Apr 2014, In : Proceedings of SPIE - The International Society for Optical Engineering. 9057, 90571E.

Research output: Contribution to journalConference article

Open Access
File

Lime Based Materials in Construction: Experimental investigations for the development and validation of atomic models

Pesce, G., Ball, R., Parker, S. & Grant, R., 2014, The International Conference on Environmentally Friendly Civil Engineering Construction and Materials: Creating and Adapting Sustainable Technologies. Manado: Civil Engineering Department Sam Ratulangi University, p. 29-36 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbonates
Decomposition
Carbonation
Calcium Carbonate
Gravimetric analysis
32 Downloads (Pure)

Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetric bistable laminates

Harris, P., Bowen, C., Betts, D. & Kim, A., Sep 2014.

Research output: Contribution to conferencePaper

File
3 Citations (Scopus)

Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetrie bistable laminates

Harris, P., Bowen, C. & Kim, H. A., 2014.

Research output: Contribution to conferencePaper

Harvesters
Laminates
Natural frequencies
Piezoelectric materials
Energy harvesting
10 Citations (Scopus)
65 Downloads (Pure)

Manufacture and characterization of conductor-insulator composites based on carbon nanotubes and thermally reduced graphene oxide

Bowen, C. R., Buschhorn, S. & Adamaki, V., 1 May 2014, In : Pure and Applied Chemistry. 86, 5, p. 765-774 10 p.

Research output: Contribution to journalArticle

Open Access
File
Carbon Nanotubes
Graphite
Oxides
Graphene
Carbon nanotubes
20 Citations (Scopus)
66 Downloads (Pure)

Manufacturing and characterization of Magnéli phase conductive fibres

Adamaki, V., Clemens, F., Ragulis, P., Pennock, S. R., Taylor, J. & Bowen, C. R., 14 Jun 2014, In : Journal of Materials Chemistry A. 2, 22, p. 8328-8333 6 p.

Research output: Contribution to journalArticle

Open Access
File
Fibers
Ceramic fibers
Catalyst supports
Energy storage
X ray diffraction

MANUFACTURING PROCESS CHALLENGES WHEN MACHINING SUPERALLOYS

Jamshidi, A., Maropoulos, P., Ansell, M. & Cave, J., Sep 2014, Advances in Manufacturing Technology XXVIII: Proceedings of the 12th International Conference on Manufacturing Research (ICMR), 2014. Rehman, F., Woodfine, N. & Marasini, R. (eds.). Southampton, U. K.: Southampton Solent University, p. 139 - 144 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Superalloys
Machining
Industry
Inspection
Defects
10 Citations (Scopus)
63 Downloads (Pure)

Material enabled thermography

Pinto, F., Maroun, F. Y. & Meo, M., 1 Oct 2014, In : NDT and E International. 67, p. 1-9 9 p.

Research output: Contribution to journalArticle

File
inspection
Inspection
shape memory alloys
heat sources
Shape memory effect
29 Citations (Scopus)

Metal triflates as catalytic curing agents in self-healing fibre reinforced polymer composite materials

Coope, T. S., Wass, D. F., Trask, R. S. & Bond, I. P., Feb 2014, In : Macromolecular Materials and Engineering. 299, 2, p. 208-218 11 p.

Research output: Contribution to journalArticle

Curing
Polymers
Metals
Epoxy Resins
Lewis Acids
16 Citations (Scopus)
41 Downloads (Pure)

Modelling of multiscale nonlinear interaction of elastic waves with three-dimensional cracks

Ciampa, F., Barbieri, E. & Meo, M., 1 Jun 2014, In : The Journal of the Acoustical Society of America. 135, 6, p. 3209-3220

Research output: Contribution to journalArticle

File
5 Citations (Scopus)

Modelling of non-metallic timber connections at elevated temperatures

Brandon, D., Ansell, M. P., Harris, R., Walker, P. & Bregulla, J., 2014, Materials and Joints in Timber Structures: Recent Developments of Technology. Aicher, S., Reinhardt, H. W. & Garrecht, H. (eds.). Springer, p. 231-241 (RILEM Bookseries; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingChapter

Timber
Veneers
Glass fibers
Wood
Temperature
10 Citations (Scopus)

Modelling the dynamic response of bistable composite plates for piezoelectric energy harvesting

Betts, D. N., Guyer, R. A., Le Bas, P-Y., Bowen, C. R., Inman, D. & Kim, H. A., 13 Jan 2014.

Research output: Contribution to conferenceOther

8 Citations (Scopus)
49 Downloads (Pure)

Monitoring hydration in lime-metakaolin composites using electrochemical impedance spectroscopy and nuclear magnetic resonance spectroscopy

Pesce, G. L., Bowen, C. R., Rocha, J., Sardo, M., Allen, G. C., Walker, P. J., Denuault, G., Serrapede, M. & Ball, R., 1 Jun 2014, In : Clay Minerals. 49, 3, p. 341-358 18 p.

Research output: Contribution to journalArticle

Open Access
Electrochemical impedance spectroscopy
hydration
Hydration
Nuclear magnetic resonance spectroscopy
lime
18 Citations (Scopus)

Morphing structures using soft polymers for active deployment

Daynes, S., Grisdale, A., Seddon, A. & Trask, R., Jan 2014, In : Smart Materials and Structures. 23, 1, 012001.

Research output: Contribution to journalArticle

Elastomers
Camouflage
Silicone Elastomers
Polymers
Textures
12 Citations (Scopus)
67 Downloads (Pure)

Multi-scale patterning of microparticles using a combination of surface acoustic waves and ultrasonic bulk waves

Zhang, J., Meng, L., Cai, F., Zheng, H. & Courtney, C. R. P., 2 Jun 2014, In : Applied Physics Letters. 104, 22, 224103.

Research output: Contribution to journalArticle

Open Access
File
microparticles
ultrasonics
acoustics
beads
trapped particles
4 Citations (Scopus)
57 Downloads (Pure)

Nanostructured Pd hydride microelectrodes: In situ monitoring of pH variations in a porous medium

Serrapede, M., Pesce, G. L., Ball, R. J. & Denuault, G., 17 Jun 2014, In : Analytical Chemistry. 86, 12, p. 5758-5765 8 p.

Research output: Contribution to journalArticle

Open Access
File
Calcium Carbonate
Microelectrodes
Hydrides
Porous materials
Carbonation
4 Citations (Scopus)

Natural fibre composites in a marine environment

Ansell, M. P., 2014, Natural Fibre Composites: Materials, Processes and Applications. Woodhead Publishing Ltd., p. 365-374 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

marine environment
mechanical property
moisture
natural fibre
history
7 Citations (Scopus)

Non-homogeneous thermal properties of bamboo

Huang, P., Chang, W-S., Shea, A., Ansell, M. P. & Lawrence, R. M. H., 2014, Materials and Joints in Timber Structures: Recent Developments of Technology. Aicher, S., Reinhardt, H. W. & Garrecht, H. (eds.). Springer, p. 657-664 (RILEM Bookseries; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingChapter

Bamboo
Thermal diffusivity
Specific heat
Thermal conductivity
Thermodynamic properties
13 Citations (Scopus)
64 Downloads (Pure)

Non-invasive damage detection in beams using marker extraction and wavelets

Song, Y-Z., Bowen, C. R., Kim, H. A., Nassehi, A., Padget, J., Gathercole, N. & Dent, A., 20 Dec 2014, In : Mechanical Systems and Signal Processing. 49, 1-2, p. 13-23 11 p.

Research output: Contribution to journalArticle

File
Damage detection
Delamination
Wavelet transforms
Computer vision
Laminates
3 Citations (Scopus)

Nonlinear acoustic and ultrasound methods for assessing and monitoring civil infrastructures

Meo, M., 1 Apr 2014, Sensor Technologies for Civil Infrastructures: Sensing Hardware and Data Collection Methods for Perfomance. Wang, M. L., Lynch, J. P. & Sohn, H. (eds.). Cambridge, U. K.: Woodhead Publishing Ltd., Vol. 1. p. 179-200 22 p. (Woodhead Publishing Series in Electronic and Optical Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

ultrasonics
acoustics
frequency response
maintenance
harmonic generations
14 Citations (Scopus)
64 Downloads (Pure)

Nonlinear damage detection in composite structures using bispectral analysis

Ciampa, F., Pickering, S., Scarselli, G. & Meo, M., 1 Jan 2014, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9064.

Research output: Chapter in Book/Report/Conference proceedingChapter

File
Damage detection
Composite structures
Ultrasonics
Aerospace engineering
Guided electromagnetic wave propagation
3 Citations (Scopus)
18 Downloads (Pure)

Nonlinear Elastic Tomography using sparse array measurements

Ciampa, F., Scarselli, G., Pickering, S., Meo, M. & Gianpiccolo, A., 2014, 7th European Workshop on Structural Health Monitoring.

Research output: Chapter in Book/Report/Conference proceedingChapter

File
19 Downloads (Pure)

Nonlinear Ultrasonic NDE

Ciampa, F., 2014, RCNDE Early Stage Reseracher Networking Event.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

File
1 Citation (Scopus)

Non-symmetric stacking sequences to aid manufacture

Fletcher, T. A., Butler, R., Dodwell, T. J. & Erland, S., 2014, 16th European Conference on Composite Materials, ECCM 2014. European Society for Composite Materials

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Consolidation
Laminates
Defects
Composite materials
Air

Novel model for arbitrary shape bistable piezoelectric-composite plates for vibration-based energy harvesting

Betts, D., Bowen, C. R., Inman, D. J. & Kim, H. A., 2014.

Research output: Contribution to conferencePaper

Novel self-healing systems: Expanding and inhibited healing agents

Rae, S. I., Bond, I. P., Trask, R. S. & Wass, D. F., 2014, ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2014. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Foams
Polymers
Debonding
Fiber reinforced materials
Delamination
39 Citations (Scopus)
50 Downloads (Pure)

Ocean warming, more than acidification, reduces shell strength in a commercial shellfish species during food limitation

Mackenzie, C., Ormondroyd, G., Curling, S., Ball, R. J., Whiteley, N. & Malham, S., 28 Jan 2014, In : PLoS ONE. 9, 1, p. 1-9 9 p., e86764.

Research output: Contribution to journalArticle

Open Access
Shellfish
shell (molluscs)
Acidification
shellfish
Oceans and Seas
40 Citations (Scopus)
69 Downloads (Pure)

Out-of-plane ply wrinkling defects during consolidation over an external radius

Dodwell, T., Butler, R. & Hunt, G., 10 Dec 2014, In : Composites Science and Technology. 105, p. 151-159 9 p.

Research output: Contribution to journalArticle

File

Paper sludge ash as a precursor for production of alkali-activated materials

Bernal, S., Ball, R., Hussein, O., Heath, A. & Provis, J., 1 Jun 2014, Proceeding of the Second International Conference on Advances in Chemically-Activated Materials (CAM’2014). Changsha, China

Research output: Chapter in Book/Report/Conference proceedingConference contribution