Research Output 2001 2019

Abstract

Generating multistability through anisotropy

Loukaides, E., Ntrekos, A. & Seffen, K. A., 31 Jan 2018, (Accepted/In press).

Research output: Contribution to conferenceAbstract

Polymer-based Composites with Enhanced Microporosity for Hydrogen Storage

Tian, M., Holyfield, L., Rochat, S., Polak-Kraśna, K., Burrows, A., Bowen, C. & Mays, T., 30 Aug 2017, p. 116. 1 p.

Research output: Contribution to conferenceAbstract

Microporosity
Hydrogen storage
Hydrogen
Polymers
Composite materials
Article
3 Citations (Scopus)
Open Access
File
Energy harvesting
figure of merit
Ferroelectric materials
Anisotropy
Single crystals
42 Citations (Scopus)

3D printed components with ultrasonically arranged microscale structure

Llewellyn-Jones, T. M., Drinkwater, B. W. & Trask, R. S., 18 Jan 2016, In : Smart Materials and Structures. 25, 2, 02LT01.

Research output: Contribution to journalArticle

microbalances
ultrasonics
Ultrasonics
glass fibers
printing
40 Citations (Scopus)

3D printed polyurethane honeycombs for repeated tailored energy absorption

Bates, S. R. G., Farrow, I. R. & Trask, R. S., 15 Dec 2016, In : Materials & Design. 112, p. 172-183 12 p.

Research output: Contribution to journalArticle

Open Access
Polyurethanes
Energy absorption
Thermoplastics
Printing
Strain rate
6 Citations (Scopus)

4D fibrous materials: characterising the deployment of paper architectures

Mulakkal, M. C., Seddon, A. M., Whittell, G., Manners, I. & Trask, R. S., 24 Aug 2016, In : Smart Materials and Structures. 25, 9, 095052.

Research output: Contribution to journalArticle

Open Access
Surface-Active Agents
Surface active agents
actuation
fibers
Fluids
9 Citations (Scopus)

4D sequential actuation: combining ionoprinting and redox chemistry in hydrogels

Baker, A. B., Wass, D. F. & Trask, R. S., 31 Oct 2016, In : Smart Materials and Structures. 25, 10, p. 1-9 9 p., 10LT02.

Research output: Contribution to journalArticle

Open Access
Hydrogels
actuation
Actuators
Iron
actuators
4 Citations (Scopus)

A calibrated UV-LED based light source for water purification and characterisation of photocatalysis

Sergejevs, A., Clarke, C. T., Allsopp, D. W. E., Marugan, J., Jaroenworaluck, A., Singhapong, W., Manpetch, P., Timmers, R., Casado, C. & Bowen, C. R., 1 Nov 2017, In : Photochemical & Photobiological Sciences. 16, 11, p. 1690-1699 10 p.

Research output: Contribution to journalArticle

Open Access
File
water treatment
Photocatalysis
ultraviolet radiation
Purification
Light emitting diodes

Accuracy of Diesel Engine Combustion Metrics over the Full Range of Engine Operating Conditions

Dowell, P. G., Akehurst, S. & Burke, R. D., 23 May 2019, In : Journal of Engineering for Gas Turbines and Power. 141, 9, 11 p., 091005.

Research output: Contribution to journalArticle

28 Citations (Scopus)

AC electrical properties of TiO2 and Magnéli phases, TinO2n−1

Regonini, D., Adamaki, V., Bowen, C. R., Dent, A. C. E., Pennock, S. R. & Taylor, J., 14 Dec 2012, In : Solid State Ionics. 229, p. 38-44 7 p.

Research output: Contribution to journalArticle

barrier layers
alternating current
capacitors
Electric properties
grain boundaries
30 Citations (Scopus)

A comparison of homogenization methods for 2-D woven composites

Angioni, S. L., Meo, M. & Foreman, A., Mar 2011, In : Composites Part B - Engineering. 42, 2, p. 181-189 9 p.

Research output: Contribution to journalArticle

Homogenization method
Composite materials
Mechanical properties
Laminates
Mechanics
3 Citations (Scopus)

A computational model for the flow of resin in self-healing composites

Hall, J., Qamar, I. P. S., Rendall, T. C. S. & Trask, R. S., 1 Mar 2015, In : Smart Materials and Structures. 24, 3, 037002.

Research output: Contribution to journalArticle

healing
resins
Reynolds number
Resins
Delamination
29 Citations (Scopus)
File
acoustic emission
point impact
structural health monitoring
transducers
waveforms
75 Citations (Scopus)
File
Wavelet analysis
acoustic emission
Acoustic emissions
wavelet analysis
newton
Source Localization
Acoustic Emission
Time Reversal
acoustic emission
Acoustic emissions
7 Citations (Scopus)

Acoustic radiation force analysis using finite difference time domain method

Grinenko, A., Wilcox, P. D., Courtney, C. R. P. & Drinkwater, B. W., 1 Jan 2012, In : Journal of the Acoustical Society of America. 131, 5, p. 3664-3670

Research output: Contribution to journalArticle

10 Citations (Scopus)

A critical review of homogenization methods for 2D woven composites

Angioni, S. L., Meo, M. & Foreman, A., Nov 2011, In : Journal of Reinforced Plastics and Composites. 30, 22, p. 1895-1906 12 p.

Research output: Contribution to journalArticle

Homogenization method
Mechanical properties
Composite materials
7 Citations (Scopus)

Active composites based on bistable laminates

Bowen, C. R., Kim, H. A. & Salo, A. I. T., 2014, In : Procedia Engineering. 75, p. 140-144 5 p.

Research output: Contribution to journalArticle

Open Access
File
Laminates
Snow and ice removal
Composite materials
Actuators
Piezoelectric ceramics
6 Citations (Scopus)

Active control of self-induced roll oscillations of a wing using synthetic jet

Hu, T., Wang, Z., Gursul, I. & Bowen, C., Sep 2013, In : International Journal of Flow Control. 5, 3-4, p. 201-214 14 p.

Research output: Contribution to journalArticle

Velocity measurement
Wind tunnels
Aspect ratio
Flow fields
Momentum

Adaptive and active materials: Selected papers from the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 14) (Newport, RI, USA, 8-10 September 2014)

Zagrai, A., Anderson, I., Atulasimha, J., Hartl, D., Shafer, M., Trask, R. & Wickenheiser, A., 1 Sep 2015, In : Smart Materials and Structures. 24, 9, 090201.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Additive manufacture of multistable structures

Loukaides, E. G., Lewis, R. W. C. & Bowen, C. R., 28 Feb 2019, In : Smart Materials and Structures. 28, 2, 02LT02.

Research output: Contribution to journalArticle

12 Citations (Scopus)
File
21 Citations (Scopus)

A fast object-oriented Matlab implementation of the Reproducing Kernel Particle Method

Barbieri, E. & Meo, M., 2012, In : Computational Mechanics. 49, 5, p. 581-602

Research output: Contribution to journalArticle

Reproducing Kernel Particle Method
Meshfree Method
Object-oriented
Moment Matrix
MATLAB
3 Citations (Scopus)

AFM tip-based nanomachining with increased cutting speed at the tool-workpiece interface

Geng, Y., Brousseau, E. B., Zhao, X., Gensheimer, M. & Bowen, C. R., 1 Jan 2018, In : Precision Engineering. 51, p. 536-544 9 p.

Research output: Contribution to journalArticle

Microscopes
Piezoelectric actuators
Polymethyl methacrylates
Machining
Throughput
7 Citations (Scopus)

A hierarchical multiple plate models theory for laminated composites including delamination and geometrical nonlinear effects

Angioni, S., Visrolia, A. & Meo, M., Jan 2011, In : Composite Structures. 93, 2, p. 780-791 12 p.

Research output: Contribution to journalArticle

Laminated composites
Delamination
Finite element method
Composite structures
Switches
5 Citations (Scopus)

Aligned macroporous TiO2/chitosan/reduced graphene oxide (rGO) composites for photocatalytic applications

Chen, C., Zhang, Y., Zeng, J., Zhang, F., Zhou, K., Bowen, C. & Zhang, D., 1 Dec 2017, In : Applied Surface Science. 424, 2, p. 170-176

Research output: Contribution to journalArticle

Open Access
File
Graphite
Chitosan
Oxides
Graphene
Composite materials
22 Citations (Scopus)

A meshfree penalty-based approach to delamination in composites

Barbieri, E. & Meo, M., Oct 2009, In : Composites Science and Technology. 69, 13, p. 2169-2177 9 p.

Research output: Contribution to journalArticle

Delamination
Composite materials
Composite structures
Unloading
Restoration
18 Citations (Scopus)

A meshless cohesive segments method for crack initiation and propagation in composites

Barbieri, E. & Meo, M., Feb 2011, In : Applied Composite Materials. 18, 1, p. 45-63 19 p.

Research output: Contribution to journalArticle

Crack initiation
Crack propagation
Cracks
Composite materials
Delamination
44 Citations (Scopus)

A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes

Jaroenworaluck, A., Regonini, D., Bowen, C. R. & Stevens, R., 15 Feb 2010, In : Applied Surface Science. 256, 9, p. 2672-2679 8 p.

Research output: Contribution to journalArticle

Nanotubes
Microscopic examination
Heat treatment
Crystalline materials
Transmission electron microscopy
32 Citations (Scopus)

A modified figure of merit for pyroelectric energy harvesting

Bowen, C., Taylor, J., Le Boulbar, E., Zabek, D. A. & Topolov, V. Y., 1 Jan 2015, In : Materials Letters. 138, p. 243-246 4 p.

Research output: Contribution to journalArticle

Open Access
File
Energy harvesting
figure of merit
thermal energy
radiant flux density
ceramics
3 Citations (Scopus)

A multisource energy harvesting utilizing highly efficient ferroelectric PMN-PT single crystal

Alomari, A., Batra, A., Aggarwal, M. & Bowen, C. R., Oct 2016, In : Journal of Materials Science-Materials in Electronics. 27, 10, p. 10020-10030 11 p.

Research output: Contribution to journalArticle

Open Access
File
Harvesters
Energy harvesting
Ferroelectric materials
Single crystals
output
25 Citations (Scopus)

Analysis and compression testing of laminates optimised for damage tolerance

Rhead, A. T., Butler, R. & Baker, N., Feb 2011, In : Applied Composite Materials. 18, 1, p. 85-100 16 p.

Research output: Contribution to journalArticle

File
Compression testing
Damage tolerance
Impact strength
Laminates
Axial compression
45 Citations (Scopus)

Analysis of bird impact on a composite tailplane leading edge

Guida, M., Meo, M., Riccio, M. & Marulo, F., Nov 2008, In : Applied Composite Materials. 15, 4-6, p. 241-257 17 p.

Research output: Contribution to journalArticle

Birds
Composite materials
Aircraft
Impact resistance
Sandwich structures
16 Citations (Scopus)

Analysis of the piezoelectric performance of modern 0-3-type composites based on relaxor-ferroelectric single crystals

Topolov, V. Y., Bisegna, P. & Bowen, C. R., 2011, In : Ferroelectrics. 413, 1, p. 176-191 16 p.

Research output: Contribution to journalArticle

Open Access
File
Ferroelectric materials
Single crystals
composite materials
Phosmet
single crystals
28 Citations (Scopus)
File
thermal energy
ceramics
cycles
flux density
electric fields
4 Citations (Scopus)

An analytical model for defect depth estimation using pulsed thermography

Angioni, S., Ciampa, F., Pinto, F., Scarselli, G., Almond, D. & Meo, M., 31 Jul 2016, In : Experimental Mechanics. 56, 6, p. 1111-1122 12 p.

Research output: Contribution to journalArticle

Open Access
File
99 Citations (Scopus)
Acoustic emissions
Carbon fiber reinforced plastics
Composite structures
Structural health monitoring
Elastic waves
3 Citations (Scopus)

A new method to determine the un-poled elastic properties of ferroelectric materials

Bowen, C. R., Dent, A. C., Stevens, R., Cain, M. G. & Avent, A., 12 Apr 2017, In : Science and Technology of Advanced Materials. 18, 1, p. 253-263 11 p.

Research output: Contribution to journalArticle

Open Access
Ferroelectric materials
Piezoelectric devices
Piezoelectric transducers
Poisson ratio
Materials properties
75 Citations (Scopus)

A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization

De Angelis, G., Meo, M., Almond, D. P., Pickering, S. G. & Angioni, S. L., Jan 2012, In : NDT and E International. 45, 1, p. 91-96 6 p.

Research output: Contribution to journalArticle

shearography
composite structures
Composite structures
Defects
optimization
34 Citations (Scopus)

A new weight-function enrichment in meshless methods for multiple cracks in linear elasticity

Barbieri, E., Petrinic, N., Meo, M. & Tagarielli, V. L., 13 Apr 2012, In : International Journal for Numerical Methods in Engineering. 90, 2, p. 177-195 19 p.

Research output: Contribution to journalArticle

Meshless Method
Linear Elasticity
Weight Function
Elasticity
Crack
34 Citations (Scopus)

An experimental demonstration of effective Curved Layer Fused Filament Fabrication utilising a parallel deposition robot

Allen, R. J. A. & Trask, R. S., 1 Oct 2015, In : Additive Manufacturing. 8, p. 78-87 10 p.

Research output: Contribution to journalArticle

Open Access
File
Demonstrations
Robots
Fabrication
3D printers
Feedstocks
31 Citations (Scopus)

An explanation of the photoinduced giant dielectric constant of lead halide perovskite solar cells

Almond, D. P. & Bowen, C. R., 7 May 2015, In : Journal of Physical Chemistry Letters. 6, 9, p. 1736-1740 5 p.

Research output: Contribution to journalArticle

Open Access
File
Permittivity
Lead
Dielectric losses
Water
Dispersions
7 Citations (Scopus)

Angle dependent optical properties of polymer films with a biomimetic anti-reflecting surface replicated from cylindrical and tapered nanoporous alumina

Hubbard, G., Nasir, M. E., Shields, P., Bowen, C. R., Satka, A., Parsons, K. P., Holmes, N. H. & Allsopp, D. W. E., 20 Apr 2012, In : Nanotechnology. 23, 15, 8 p., 155302.

Research output: Contribution to journalArticle

9 Citations (Scopus)

An investigation into 3D printing of fibre reinforced thermoplastic composites

Blok, L. G., Longana, M. L., Yu, H. & Woods, B. K. S., 31 Aug 2018, In : Additive Manufacturing. 22, 8, p. 176-186 11 p.

Research output: Contribution to journalArticle

Open Access
39 Citations (Scopus)

An in vitro study of electrically active hydroxyapatite-barium titanate ceramics using Saos-2 cells

Baxter, F., Turner, I. G., Bowen, C. R., Gittings, J. P. & Chaudhuri, J. B., Aug 2009, In : Journal of Materials Science: Materials in Medicine. 20, 8, p. 1697-1708 12 p.

Research output: Contribution to journalArticle

Barium titanate
Ceramics
Hydroxyapatite
Cells
Bone Substitutes
7 Citations (Scopus)

Anisotropy of electromechanical properties and hydrostatic response of advanced 2-2-type composites

Topolov, V. Y., Krivoruchko, A. V. & Bowen, C. R., 2012, In : Physica Status Solidi A: Applications and Materials Science. 209, 7, p. 1334-1342 9 p.

Research output: Contribution to journalArticle

hydrostatics
Anisotropy
Single crystals
anisotropy
composite materials
11 Citations (Scopus)

Anodised titania nanotubes prepared in a glycerol/NaF electrolyte

Regonini, D., Satka, A., Allsopp, D. W. E., Jaroenworaluck, A., Stevens, R. & Bowen, C. R., Jul 2009, In : Journal of Nanoscience and Nanotechnology. 9, 7, p. 4410-4416 7 p.

Research output: Contribution to journalArticle

glycerols
Glycerol
Nanotubes
Electrolytes
nanotubes

A Non-Destructive Method for Evaluation of the Out of Plane Elastic Modulus of Porous and Composite Materials

Bucciarelli, F., Malfense Fierro, G. P., Zarrelli, M. & Meo, M., 26 Jan 2019, In : Applied Composite Materials. 26, 3, p. 871-896 26 p.

Research output: Contribution to journalArticle

Open Access
20 Citations (Scopus)

A novel bistable energy harvesting concept

Scarselli, G., Nicassio, F., Pinto, F., Ciampa, F., Iervolino, O. & Meo, M., 2016, In : Smart Materials and Structures.

Research output: Contribution to journalArticle

26 Citations (Scopus)
Reels
Feedback
Wire
Actuators
Marine applications