Research Output 1988 2019

2010
14 Citations (Scopus)

Fracture toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding

Ahmad, Z., Ansell, M. & Smedley, D., Oct 2010, In : International Journal of Adhesion and Adhesives. 30, 7, p. 539-549 11 p.

Research output: Contribution to journalArticle

Timber
Fracture toughness
Adhesives
Acrylonitrile
Toughness
1 Citation (Scopus)

High performance of advanced composites based on relaxor-ferroelectric single crystals

Topolov, V. Y., Bowen, C. R. & Glushanin, S. V., 2010, Piezoceramic Materials and Devices. Nova Science Publishers, p. 71-112 42 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

composite materials
single crystals
polymers
solid solutions
hydrophones
10 Citations (Scopus)

Hydrostatic Piezoelectric Coefficients of the 2-2 Composite Based on 011 -poled 0.71Pb(Mg1/3Nb2/3)O-3-0.29PbTiO(3) Single Crystal

Topolov, V. Y., Krivoruchko, A. V., Bowen, C. R. & Panich, A. A., 2010, In : Ferroelectrics. 400, 1, p. 410-416 7 p.

Research output: Contribution to journalArticle

hydrostatics
Single crystals
Underwater acoustics
composite materials
single crystals
53 Citations (Scopus)

Manipulation of microparticles using phase-controllable ultrasonic standing waves

Courtney, C. R. P., Ong, C-K., Drinkwater, B. W., Wilcox, P. D., Demore, C., Cochran, S., Glynne-jones, P. & Hill, M., Oct 2010, In : Journal of the Acoustical Society of America. 128, 4, p. EL195-EL199 5 p.

Research output: Contribution to journalArticle

microparticles
standing waves
manipulators
ultrasonics
trapped particles
67 Citations (Scopus)

Modelling and evaluation of eddy current stimulated thermography

Wilson, J., Tian, G. Y., Abidin, I. Z., Yang, S. & Almond, D., Sep 2010, In : Nondestructive Testing and Evaluation. 25, 3, p. 205-218 14 p.

Research output: Contribution to journalArticle

Eddy currents
eddy currents
Defects
evaluation
defects
3 Citations (Scopus)

Modelling and optimisation of a sapphire/GaN-based diaphragm structure for pressure sensing in harsh environments

Edwards, M. J., Vittoz, S., Amen, R., Rufer, L., Johander, P., Bowen, C. R. & Allsopp, D. W. E., Oct 2010, Conference Proceedings - The 18th International Conference on Advanced Semiconductor Devices and Microsystems, ASDAM 2010. Piscataway, NJ: IEEE, p. 127-130 4 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Diaphragms
Sapphire
Sensors
High electron mobility transistors
Pressure sensors
16 Citations (Scopus)

Modelling wafer bow in silicon-polycrystalline CVD diamond substrates for GaN-based devices

Edwards, M. J., Bowen, C. R., Allsopp, D. W. E. & Dent, A. C. E., 29 Sep 2010, In : Journal of Physics D: Applied Physics. 43, 38, 385502.

Research output: Contribution to journalArticle

Diamond
bows
Polysilicon
Chemical vapor deposition
Diamonds
10 Citations (Scopus)

Nanostructured electrodes for biocompatible CMOS integrated circuits

Graham, A. H. D., Bowen, C. R., Robbins, J., Lalev, G., Marken, F. & Taylor, J., 3 Jun 2010, In : Sensors and Actuators B-Chemical. 147, 2, p. 697-706 10 p.

Research output: Contribution to journalArticle

CMOS integrated circuits
Aluminum Oxide
integrated circuits
CMOS
Alumina
7 Citations (Scopus)

Piezoelectric Actuation in a High Bandwidth Valve

Branson, D., Johnston, D. N., Tilley, D., Bowen, C. & Keogh, P., Dec 2010, In : Ferroelectrics. 408, 1, p. 32-40 9 p.

Research output: Contribution to journalArticle

actuation
Flow rate
bandwidth
Bandwidth
Reels
58 Citations (Scopus)

Polarization of hydroxyapatite: Influence on osteoblast cell proliferation

Kumar, D., Gittings, J. P., Turner, I. G., Bowen, C. R., Bastida-Hidalgo, A. & Cartmell, S. H., Apr 2010, In : Acta Biomaterialia. 6, 4, p. 1549-1554 6 p.

Research output: Contribution to journalArticle

Osteoblasts
Cell proliferation
Durapatite
Hydroxyapatite
Cell Proliferation
52 Citations (Scopus)

Pulsed eddy current thermography: system development and evaluation

Wilson, J., Tian, G. Y., Abidin, I. Z., Yang, S. X. & Almond, D., Feb 2010, In : Insight: Non-Destructive Testing and Condition Monitoring . 52, 2, p. 87-90 4 p.

Research output: Contribution to journalArticle

Eddy currents
Inspection
Defects
Heating
Infrared imaging
98 Citations (Scopus)

Quantitative evaluation of angular defects by pulsed eddy current thermography

Zainal Abidin, I., Yun Tian, G., Wilson, J., Yang, S. & Almond, D., Oct 2010, In : NDT and E International. 43, 7, p. 537-546 10 p.

Research output: Contribution to journalArticle

Eddy currents
eddy currents
slots
Defects
evaluation
6 Citations (Scopus)

Sensing methodology for in vivo stability evaluation of total hip and knee arthroplasty

Hao, S. Y., Taylor, J. T., Bowen, C. R., Gheduzzi, S. & Miles, A. W., Jan 2010, In : Sensors and Actuators A-Physical. 157, 1, p. 150-160 11 p.

Research output: Contribution to journalArticle

Arthroplasty
Calibration
methodology
evaluation
reluctance
28 Citations (Scopus)

Shape memory alloy-piezoelectric active structures for reversible actuation of bistable composites

Kim, H. A., Betts, D., Salo, A. I. T. & Bowen, C., 26 Jun 2010, In : AIAA Journal. 48, 6, p. 1265-1268 4 p.

Research output: Contribution to journalArticle

Shape memory effect
Composite materials
Fibers
Piezoelectric actuators
Cantilever beams

Stability of room temperature cure epoxy adhesives for timber structures under creep loading in tension and shear

Ansell, M. P., Muhammad Roseley, A. S. & Smedley, D., 2010, 11th World Conference on Timber Engineering 2010, WCTE 2010. Engineered Wood Products Association, Vol. 4. p. 2900-2906 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Timber
Adhesives
Creep
Temperature
Wood

Structural health monitoring of bolted joints using linear and nonlinear acoustic methods

Amerini, F. & Meo, M., 2010, Proceedings of the 5th European Workshop - Structural Health Monitoring 2010. p. 590-600 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bolted joints
Structural health monitoring
Acoustics
Health
Torque
13 Citations (Scopus)

Structural response of laminated composite plates to blast load

Dolce, F. & Meo, M., Oct 2010.

Research output: Contribution to conferencePaper

13 Citations (Scopus)

Structural response of laminated composite plates to blast load

Dolce, F., Meo, M., Wright, A., French, M. & Bernabei, M., 1 Jun 2010, In : Plastics, Rubber and Composites: Macromolecular Engineering. 39, 3-5, p. 180-188 9 p.

Research output: Contribution to journalArticle

Laminated composites
Fluid structure interaction
Carbon fiber reinforced plastics
Delamination
Laminates

The dielectric response of compacted cementitious composites

Panzera, T. H., Borges, P. H. R., Rubio, J. C., Bowen, C. R., Strecker, K. & Sabariz, A. L. R., Jul 2010, In : Advances in Cement Research. 22, 3, p. 127-134 8 p.

Research output: Contribution to journalArticle

Silicon Dioxide
Compaction
Permittivity
Silica
Composite materials
9 Citations (Scopus)

The fabrication of mono-domain highly ordered nanoporous alumina on a wafer scale by a guided electric field

Nasir, M. E., Allsopp, D. W. E., Bowen, C. R., Hubbard, G. & Parsons, K. P., 16 Feb 2010, In : Nanotechnology. 21, 10, 105303.

Research output: Contribution to journalArticle

Aluminum Oxide
Masks
Alumina
Electric fields
Fabrication

The influence of mechanical stress on piezoceramic tubes

Lewis, R. W. C., Merrick, A. J., Dent, A. C. E. & Bowen, C. R., 2010, 2010 IEEE International Symposium on the Applications of Ferroelectrics. New York: IEEE

Research output: Chapter in Book/Report/Conference proceedingChapter

Piezoelectric devices
Actuators
Lead
Engineers
Sensors
25 Citations (Scopus)

Time reversal DORT method applied to nonlinear elastic wave scattering

Barbieri, E. & Meo, M., Nov 2010, In : Wave Motion. 47, 7, p. 452-467 16 p.

Research output: Contribution to journalArticle

wave scattering
elastic waves
elastic scattering
damage
harmonics
17 Citations (Scopus)

Variations in mechanisms of selective area growth of GaN on nano-patterned substrates by MOVPE

Liu, C., Shields, P., Chen, Q., Allsopp, D., Wang, W. N., Bowen, C., Phan, T. L. & Cherns, D., 2010, In : Physica Status Solidi (C) Current Topics in Solid State Physics. 7, 1, p. 32-35 4 p.

Research output: Contribution to journalArticle

pyramids
lithography
porosity
screws
flat surfaces
2011
32 Citations (Scopus)

A comparison of homogenization methods for 2-D woven composites

Angioni, S. L., Meo, M. & Foreman, A., Mar 2011, In : Composites Part B - Engineering. 42, 2, p. 181-189 9 p.

Research output: Contribution to journalArticle

Homogenization method
Composite materials
Mechanical properties
Laminates
Mechanics
83 Citations (Scopus)
76 Downloads (Pure)

A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques

Chatterjee, K., Tuli, S., Pickering, S. G. & Almond, D. P., Nov 2011, In : NDT and E International. 44, 7, p. 655-667 13 p.

Research output: Contribution to journalArticle

Open Access
File
Defects
evaluation
defects
Signal to noise ratio
signal to noise ratios
52 Downloads (Pure)

Acoustic emission localization in a composite stiffened panel using a time reversal algorithm

Ciampa, F. & Meo, M., 2011, Composite Science and Technology. Zurich-Durnten: Trans Tech Publications, Vol. 471-472. p. 910-915 6 p. (Key Engineering Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

File
acoustic emission
point impact
composite materials
structural health monitoring
transducers
31 Citations (Scopus)
72 Downloads (Pure)
File
acoustic emission
point impact
structural health monitoring
transducers
waveforms
Source Localization
Acoustic Emission
Time Reversal
acoustic emission
Acoustic emissions

Acoustic-radiation-force manipulation of microparticles using phase-controllable ultrasonic standing waves

Courtney, C. R. P., Ong, C., Demore, C., Glynne-jones, P., Drinkwater, B. W., Bernassau, A. L., Cochran, S., Hill, M., Wilcox, P. D. & Cumming, D. R. S., 2011.

Research output: Contribution to conferencePaper

10 Citations (Scopus)

A critical review of homogenization methods for 2D woven composites

Angioni, S. L., Meo, M. & Foreman, A., Nov 2011, In : Journal of Reinforced Plastics and Composites. 30, 22, p. 1895-1906 12 p.

Research output: Contribution to journalArticle

Homogenization method
Mechanical properties
Composite materials
7 Citations (Scopus)

A hierarchical multiple plate models theory for laminated composites including delamination and geometrical nonlinear effects

Angioni, S., Visrolia, A. & Meo, M., Jan 2011, In : Composite Structures. 93, 2, p. 780-791 12 p.

Research output: Contribution to journalArticle

Laminated composites
Delamination
Finite element method
Composite structures
Switches
19 Citations (Scopus)

A meshless cohesive segments method for crack initiation and propagation in composites

Barbieri, E. & Meo, M., Feb 2011, In : Applied Composite Materials. 18, 1, p. 45-63 19 p.

Research output: Contribution to journalArticle

Crack initiation
Crack propagation
Cracks
Composite materials
Delamination
25 Citations (Scopus)
75 Downloads (Pure)

Analysis and compression testing of laminates optimised for damage tolerance

Rhead, A. T., Butler, R. & Baker, N., Feb 2011, In : Applied Composite Materials. 18, 1, p. 85-100 16 p.

Research output: Contribution to journalArticle

File
Compression testing
Damage tolerance
Impact strength
Laminates
Axial compression
16 Citations (Scopus)
65 Downloads (Pure)

Analysis of the piezoelectric performance of modern 0-3-type composites based on relaxor-ferroelectric single crystals

Topolov, V. Y., Bisegna, P. & Bowen, C. R., 2011, In : Ferroelectrics. 413, 1, p. 176-191 16 p.

Research output: Contribution to journalArticle

Open Access
File
Ferroelectric materials
Single crystals
composite materials
Phosmet
single crystals
11 Citations (Scopus)

A probabilistic approach for design and certification of self-healing advanced composite structures

Williams, H. R., Trask, R. S. & Bond, I. P., Dec 2011, In : Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability. 225, 4, p. 435-449 15 p.

Research output: Contribution to journalArticle

Composite structures
Sandwich structures
Monte Carlo methods
Costs

Autonomous self-healing functionality in advanced fibre reinforced polymer composite materials

Coope, T. S., Mayer, U. F. J., Bond, I. P., Trask, R. S. & Wass, D. F., 2011, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Epoxy Resins
Epoxy resins
Capsules
Polymers
Fibers

A vortex valve for flow control in fluid systems

Sangiah, D., Plummer, A. R., Bowen, C. R. & Guerrier, P., May 2011, p. 241. 253 p.

Research output: Contribution to conferencePaper

18 Citations (Scopus)
66 Downloads (Pure)

Baseline-free estimation of residual fatigue life using a third order acoustic nonlinear parameter

Amura, M., Meo, M. & Amerini, F., Oct 2011, In : Journal of the Acoustical Society of America. 130, 4, p. 1829-1837 9 p.

Research output: Contribution to journalArticle

File
fatigue life
acoustics
crack propagation
cracks
nonlinearity

Biocompatible Electrode

Graham, A., Taylor, J., Bowen, C. & Robbins, J., 17 Aug 2011, IPC No. G01N33/487, Patent No. WO2010055287 (A1), 10 Nov 2009, Priority date 11 Nov 2009, Priority No. 0820629.4

Research output: Patent

Electrodes
Electron tubes
Oxides
Integrated circuits
Metals
2 Citations (Scopus)

Bioinspired vasculatures for self-healing fibre reinforced polymer composites

Norris, C., Bond, I. & Trask, R., 2011, ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2011. Vol. 2. p. 599-606 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polymers
Fibers
Composite materials
Resins
Waxes
7 Citations (Scopus)

Buckling and postbuckling of a delaminated composite beam in bending

Kinawy, M., Butler, R. & Hunt, G. W., Mar 2011, In : AIAA Journal. 49, 3, p. 670-672 3 p.

Research output: Contribution to journalArticle

Buckling
Hydraulics
Displacement control
Autoclaves
Composite materials
30 Citations (Scopus)

Commercialisation of CMOS integrated circuit technology in multi-electrode arrays for neuroscience and cell-based biosensors

Graham, A. H. D., Robbins, J., Bowen, C. R. & Taylor, J., May 2011, In : Sensors. 11, 5, p. 4943-4971 29 p.

Research output: Contribution to journalArticle

CMOS integrated circuits
neurology
Semiconductors
commercialization
Biosensing Techniques
59 Citations (Scopus)
94 Downloads (Pure)

Crack imaging by scanning laser-line thermography and laser-spot thermography

Li, T., Almond, D. P. & Rees, D. A. S., Mar 2011, In : Measurement Science and Technology. 22, 3, 14 p., 035701.

Research output: Contribution to journalArticle

File
Laser Scanning
Crack
cracks
Imaging
Laser
74 Citations (Scopus)

Crack imaging by scanning pulsed laser spot thermography

Li, T., Almond, D. P. & Rees, D. A. S., Jan 2011, In : NDT and E International. 18, 1, p. 117-123 7 p.

Research output: Contribution to journalArticle

Pulsed lasers
pulsed lasers
cracks
Cracks
Scanning
2 Citations (Scopus)

Damage resistance and damage tolerance of hybrid carbon-glass laminates

Rhead, A. T., Shi, H. & Butler, R., 2011, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics, AIAA 2011-2172

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damage tolerance
Laminates
Carbon fiber reinforced plastics
Glass
Carbon
2 Citations (Scopus)
48 Downloads (Pure)

Damage Resistance and Damage Tolerance of Hybrid Carbon-Glass Laminates

Rhead, A., Hua, S. & Butler, R., 11 Apr 2011. 12 p.

Research output: Contribution to conferencePaper

File
Damage tolerance
Laminates
Carbon fiber reinforced plastics
Glass
Carbon
2 Citations (Scopus)

Design optimization of stiffness characteristics for bistable composite laminates

Betts, D. N., Alicia Kim, H. & Bowen, C. R., 2011, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laminates
Stiffness
Composite materials
Design optimization

Ductility in composites: Influence of ply-cuts on the flexural behavior of carbon fibre reinforced polymer (CFRP)

Malkin, R., Yasaee, M., Bond, I. P. & Trask, R. S., 2011, 2nd Joint US-Canada Conference on Composites - American Society for Composites, 26th Annual Technical Conference: Canadian Association for Composite Structures and Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nacre
Carbon fibers
Ductility
Polymers
Composite materials
1 Citation (Scopus)

Ductility in composites: Influence of ply-cuts on the flexural behavior of carbon fibre reinforced polymer (CFRP)

Malkin, R., Yasaee, M., Bond, I. P. & Trask, R. S., 2011, 26th Annual Technical Conference of the American Society for Composites 2011 and the 2nd Joint US-Canada Conference on Composites. Vol. 1. p. 99-117 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nacre
Carbon fibers
Ductility
Polymers
Composite materials
1 Citation (Scopus)

Electromechanical coupling factors of novel 0-3-0 composites based on PMN-xPT single crystals

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 2011, In : Ferroelectrics. 422, 1, p. 40-43 4 p.

Research output: Contribution to journalArticle

Electromechanical coupling
Single crystals
composite materials
single crystals
Composite materials