Department of Mechanical Engineering – Research Output — the University of Bath's research portal

2019

1 Citation (Scopus)

4D printing with robust thermoplastic polyurethane hydrogel-elastomer trilayers

Baker, A. B., Bates, S. R. G., Llewellyn-Jones, T. M., Valori, L. P. B., Dicker, M. P. M. & Trask, R. S., 5 Feb 2019, In : Materials and Design. 163, 107544.

Research output: Contribution to journal › Article

Open Access

Additive manufacture of multistable structures

Loukaides, E. G., Lewis, R. W. C. & Bowen, C. R., 1 Feb 2019, In : Smart Materials and Structures. 28, 2, 02LT02.

Research output: Contribution to journal › Article

File

A molecular design strategy to construct the near-infrared fluorescent probe for selectively sensing human cytochrome P450 2J2

Ning, J., Liu, T., Dong, P., Wang, W., Ge, G., Wang, B., Yu, Z., Shi, L., Tian, X., Huo, X., Feng, L., Wang, C., Sun, C., Cui, J-N., James, T. D. & Ma, X., 16 Jan 2019, In : Journal of the American Chemical Society. 141, 2, p. 1126-1134 9 p.

Research output: Contribution to journal › Article

A MUltidimensional Compliant Decoupled Actuator (MUCDA) for Pelvic Support During Gait

Wyss, D., Pennycott, A., Bartenbach, V., Riener, R. & Vallery, H., 1 Feb 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 1, p. 164-174 11 p.

Research output: Contribution to journal › Article

1 Citation (Scopus)

A multilayer microperforated panel prototype for broadband sound absorption at low frequencies

Bucciarelli, F., Malfense Fierro, G. P. & Meo, M., 1 Mar 2019, In : Applied Acoustics. 146, p. 134-144 11 p.

Research output: Contribution to journal › Article

Analysis of Fe(Se,Te) Films Deposited On Unbuffered Invar 36

Sylva, G., Malagoli, A., Bellingeri, E., Putti, M., Ferdeghini, C., Vannozzi, A., Celentano, G., Hopkins, S. C., Lunt, A., Ballarino, A. & Braccini, V., 17 Jan 2019, In : IEEE Transactions on Applied Superconductivity. 29, 5, p. 1-5 5 p.

Research output: Contribution to journal › Article

Open Access

File

A new cutting tool design for cryogenic machining of Ti-6Al-4V titanium alloy

Shokrani, A. & Newman, S. T., 4 Feb 2019, In : Materials. 12, 3, 477.

Research output: Contribution to journal › Article

Open Access

A plate model for compressive strength prediction of delaminated composites

Choudhry, R. S., Rhead, A. T., Nielsen, M. W. D. & Butler, R., 15 Feb 2019, In : Composite Structures. 210, p. 509-517 9 p.

Research output: Contribution to journal › Article

Attempt to correlate simulations and measurements of turbine performance under pulsating flows for automotive turbochargers

Avola, C., Copeland, C., Romagnoli, A., Burke, R. & Dimitriou, P., Feb 2019, In : Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 233, 2, p. 174-187 14 p.

Research output: Contribution to journal › Article

Open Access

File

Turbines

Powertrains

Flow measurement

Diesel engines

Sampling

Breaking wave imaging using lidar and sonar

Bryan, O., Bayle, P., Blenkinsopp, C. & Hunter, A. J., 12 Mar 2019, In : IEEE Journal of Oceanic Engineering. p. 1-11 11 p.

Research output: Contribution to journal › Article

Open Access

File

1 Citation (Scopus)

Complex but negligible: Non-linearity of the inertial coupling between the platform and blades of floating wind turbines

Lupton, RC. & Langley, RS., 1 Apr 2019, In : Renewable Energy. 134, p. 710-726 17 p.

Research output: Contribution to journal › Article

Deadzone compensation control based on detection of micro flow rate in pilot stage of proportional directional valve

Lu, Z., Zhang, J., Xu, B., Wang, D., Su, Q., Qian, J., Yang, G. & Pan, M., 2 Apr 2019, In : ISA Transactions. 19, 30

Research output: Contribution to journal › Article

Development of sputtered Nb3Sn films on copper substrates for superconducting radiofrequency applications

Ilyina, E. A., Rosaz, G., Descarrega, J. B., Vollenberg, W., Lunt, A. J. G., Leaux, F., Calatroni, S., Venturini-Delsolaro, W. & Taborelli, M., 21 Jan 2019, In : Superconductor Science and Technology. 32, 3, p. 1-10 10 p.

Research output: Contribution to journal › Article

Open Access

File

Dielectric and piezoelectric properties of porous lead-free 0.5Ba(Ca_0.8Zr_0.2)O₃-0.5(Ba_0.7Ca _0.3)TiO₃ ceramics

Zhang, Y., Xie, M., Roscow, J. & Bowen, C., 1 Apr 2019, In : Materials Research Bulletin. 112, p. 426-431 6 p.

Research output: Contribution to journal › Article

File

dielectric properties

Lead

Porosity

ceramics

porosity

2 Citations (Scopus)

Effects of splined shaft bending rigidity on cylinder tilt behaviour for high-speed electro-hydrostatic actuator pumps

Zhang, J., Chen, Y., Xu, B., Pan, M. & Chao, Q., 1 Feb 2019, In : Chinese Journal of Aeronautics. 32, 2, p. 499-512 14 p.

Research output: Contribution to journal › Article

Open Access

Efficiently Generating Mixing by Combining Differing Small Amplitude Helical Geometries

Cookson, A., Doorly, D. & Sherwin, S., 27 Mar 2019, In : Fluids. 4, 2, p. 59-84 26 p.

Research output: Contribution to journal › Article

Open Access

File

Electrical and Mechanical Self‐Healing in High‐Performance Dielectric Elastomer Actuator Materials

Bowen, C., Roscow, J., Zhang, Y. & Zhang, R., 21 Feb 2019, In : Advanced Functional Materials.

Research output: Contribution to journal › Article

File

Electrical dual-percolation in MWCNTs/SBS/PVDF based thermoplastic elastomer (TPE) composites and the effect of mechanical stretching

Ellingford, C., Smith, H., Yan, X., Bowen, C., Figiel, Ł., McNally, T. & Wan, C., 1 Mar 2019, In : European Polymer Journal. 112, p. 504-514 11 p.

Research output: Contribution to journal › Article

Energy Efficiency Improvement of Heavy-Load Mobile Hydraulic Manipulator with Electronically Tunable Operating Modes

Ding, R., Zhang, J., Xu, B., Cheng, M. & Pan, M., 30 Mar 2019, In : Energy Conversion and Management. p. 447-461

Research output: Contribution to journal › Article

Energy saving potential of high temperature heat pumps in the UK Food and Drink sector

Cooper, S., Hammond, G., Hewitt, N., Norman, J., Tassou, S. & Youssef, W., 18 Mar 2019, In : Energy Procedia. 161, p. 142-149 8 p.

Research output: Contribution to journal › Article

Open Access

Environmental and resource burdens associated with low carbon, more electric transition pathways to 2050: Footprint components from carbon emissions and land use to waste arisings and water consumption

Hammond, G., Howard, H. & Singh Rana, H., 8 Apr 2019, In : Global Transitions. 1, p. 28-43 16 p.

Research output: Contribution to journal › Article

Open Access

Experimental and Computational Investigation of Flow Instabilities in Turbine Rim Seals

Horwood, J., Hualca Tigsilema, F. P., Scobie, J., Wilson, M., Sangan, C. & Lock, G., Jan 2019, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 141, 1, 12 p., 011028.

Research output: Contribution to journal › Article

Seals

Wheels

Turbines

Stators

Compressed air motors

Experimental Results from the Bath μ-Wave Rotor Turbine Performance Tests

Tuechler, S. & Copeland, C., 30 Mar 2019, In : Journal of Energy Conversion and Management. 189, p. 33-48 16 p., ECM-D-19-00781.

Research output: Contribution to journal › Article

Ferroelectret materials and devices for energy harvesting applications

Zhang, Y., Bowen, C. R., Ghosh, S. K., Mandal, D., Khanbareh, H., Arafa, M. & Wan, C., 1 Mar 2019, In : Nano Energy. 57, p. 118-140 23 p.

Research output: Contribution to journal › Article

Flexible Multifunctional Sensors for Wearable and Robotic Applications

Xie, M., Hisano, K., Zhu, M., Toyoshi, T., Pan, M., Okada, S., Tsutsumi, O., Kawamura, S. & Bowen, C., 4 Jan 2019, In : Advanced Materials Technologies. 1800626.

Research output: Contribution to journal › Article

File

Folding-shearing: shrinking and stretching sheet metal with no thickness change

Allwood, J., Cleaver, C., Loukaides, E., Music, O. & Nagy-Sochacki, A., 9 Apr 2019, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journal › Article

Green Chemistry for Stainless Steel Corrosion Resistance: Life Cycle Assessment (LCA) of Citric Acid versus Nitric Acid Passivation

Parsons, S., Poyntz-Wright, O., Kent, A. & McManus, M., 9 Jan 2019, In : Materials Today Sustainability.

Research output: Contribution to journal › Article

Holistic Working

Lattanzio, S., 1 Feb 2019, Asset Magazine, p. 26.

Research output: Contribution to specialist publication › Article

1 Citation (Scopus)

How much cement can we do without? Lessons from cement material flows in the UK

Shanks, W., Dunant, C. F., Drewniok, M. P., Lupton, R. C., Serrenho, A. & Allwood, J. M., 1 Feb 2019, In : Resources, Conservation and Recycling. 141, p. 441-454 14 p.

Research output: Contribution to journal › Article

Influence of Leakage Flows on Hot Gas Ingress

Patinios, M., Ong, I., Scobie, J., Lock, G. & Sangan, C., 1 Feb 2019, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 141, 2, 10 p., 021010.

Research output: Contribution to journal › Article

Leakage (fluid)

Stators

Flow structure

Seals

Wheels

Lipid production through the single-step microwave hydrolysis of macroalgae using the oleaginous yeast Metschnikowia pulcherrima

Abeln, F., Fan, J., Budarin, V. L., Briers, H., Parsons, S., Allen, M. J., Henk, D. A., Clark, J. & Chuck, C. J., 1 Mar 2019, In : Algal Research. 38, p. 1-9 9 p., 101411.

Research output: Contribution to journal › Article

Magnetocaloric effect and piezoresponse of engineered ferroelectric-ferromagnetic heterostructures

Vats, G., Ravikant, Kumari, S., Pradhan, D., Katiyar, R., Ojha, V. N., Bowen, C. & Kumar, A., 1 Mar 2019, In : Journal of Magnetism and Magnetic Materials. 473, p. 511-516 6 p.

Research output: Contribution to journal › Article

5 Citations (Scopus)

Methanol as a fuel for internal combustion engines

Verhelst, S., Turner, J., Sileghem, L. & Vancoillie, J., 1 Jan 2019, In : Progress in Energy and Combustion Science. 70, p. 43-88 46 p.

Research output: Contribution to journal › Article

Model of Effect of Hot Gas Ingress on Temperature of Turbine Disks

Owen, J., Tang, H. & Lock, G., 1 Jan 2019, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 141, 01, p. 1-9 9 p., 012501.

Research output: Contribution to journal › Article

Turbines

Rotors

Gases

Stators

Temperature

Modified near-wakes of axisymmetric cylinders with slanted base

Bulathsinghala, D., Wang, Z. & Gursul, I., 10 Jan 2019, (Accepted/In press) In : Aerospace Science and Technology.

Research output: Contribution to journal › Article

Nudging axially compressed cylindrical panels towards imperfection insensitivity

Cox, B. S., Groh, R. & Pirrera, A., 14 Mar 2019, (Accepted/In press) In : Journal Of Applied Mechanics.

Research output: Contribution to journal › Article

Onset of Convection in an Inclined Anisotropic Porous Layer with Internal Heat Generation

Storesletten, L. & Rees, D. A. S., 16 Apr 2019, In : Fluids. 4, 2, p. 1-8 18 p.

Research output: Contribution to journal › Article

Open Access

Operative and Radiographic Acetabular Component Orientation in Total Hip Replacement: Influence of Pelvic Orientation and Surgical Positioning Technique

Rutherford, M., O'Connor, J. D., Gill, H. S., Hill, J., Beverland, D., Lennon, A. B. & Dunne, N. J., 1 Feb 2019, In : Medical Engineering & Physics . 64, p. 7-14 8 p.

Research output: Contribution to journal › Article

Hip Replacement Arthroplasties

Ligaments

Pelvis

Regression Analysis

Research

Oxidation of ethanol and hydrocarbon mixtures in a pressurised flow reactor

Yuan, H., Lu, Z., Chen, Z., Yang, Y., Brear, M., Anderson, J. & Leone, T., 31 Jan 2019, In : Combustion and Flame. 199, p. 96-113 18 p.

Research output: Contribution to journal › Article

Proof of concept for a smart composite orbital debris detector

De Simone, M. E., Andreades, C., Hilmi, A. M., Meo, M. & Ciampa, F., 26 Feb 2019, In : Acta Astronautica.

Research output: Contribution to journal › Article

1 Citation (Scopus)

Pyro-electrolytic water splitting for hydrogen generation

Zhang, Y., Kumar, S., Marken, F., Krasny, M., Roake, E., Eslava, S., Dunn, S., Da Como, E. & Bowen, C. R., 1 Apr 2019, In : Nano Energy. 58, p. 183-191 8 p.

Research output: Contribution to journal › Article

File

1 Citation (Scopus)

Reduction of open-circuit DC-winding-induced voltage in wound field switched flux machines by skewing

Wu, Z. Z., Zhu, Z. Q., Wang, C., Mipo, J. C., Personnaz, S. & Farah, P., 1 Mar 2019, In : IEEE Transactions on Industrial Electronics. 66, 3, p. 1715-1726 12 p., 8365132.

Research output: Contribution to journal › Article

Open Access

Residual strain mapping through pair distribution function analysis of the porcelain veneer within a yttria partially stabilised zirconia dental prosthesis

Lunt, A. J. G., Chater, P., Kleppe, A., Baimpas, N., Neo, T. K. & Korsunsky, A. M., 1 Feb 2019, In : Dental Materials. 35, 2, p. 257-269 13 p.

Research output: Contribution to journal › Article

Solid-gas phase photo-catalytic behaviour of rutile and TiOn (1<n<2) sub-oxide phases for self-cleaning applications

Nuño, M., Adamaki, V., Tobaldi, D. M., Hortigüela Gallo, M., Otero-Irurueta, G., Bowen, C. & Ball, R., 7 Jan 2019, In : Materials. 12, 1, 15 p., 170.

Research output: Contribution to journal › Article

Open Access

File

Some useful optimisations for unstructured computational fluid dynamics codes on multicore and manycore architectures

Hadade, I., Wang, F., Carnevale, M. & di Mare, L., 1 Feb 2019, In : Computer Physics Communications. 235, p. 305-323 18 p.

Research output: Contribution to journal › Article

Open Access

Stacking sequence selection for defect-free forming of uni-directional ply laminates

Johnson, K. J., Butler, R., Loukaides, E. G., Scarth, C. & Rhead, A. T., 8 Feb 2019, In : Composites Science and Technology. 171, p. 34-43 10 p.

Research output: Contribution to journal › Article

Stakeholder perspectives on the cost requirements of Small Modular Reactors

Agar, A. S., Goodfellow, M. J., Newnes, L. B. & Goh, Y. M., 1 Apr 2019, In : Progress in Nuclear Energy. 112, p. 51-62 12 p.

Research output: Contribution to journal › Article

Tailoring the electrical and thermal conductivity of multi-component and multi-phase polymer composites

Huang, Y., Ellingford, C., Bowen, C., McNally, T., Wu, D. & Wan, C., 1 Mar 2019, In : International Materials Reviews.

Research output: Contribution to journal › Article

The design, control and testing of an integrated electrohydrostatic powered ankle prosthesis

Yu, T., Plummer, A., Iravani, P., Bhatti, J., Zahedi, S. & Moser, D., Feb 2019, (Submitted) In : IEEE/ASME Transactions on Mechatronics. 11 p., TMECH-07-2018-8050.R1.

Research output: Contribution to journal › Article

The impact of nitric oxide on knock in the octane rating engine

Chen, Z., Yuan, H., Yang, Y., Brear, M. & Foong, T. M., 2019, In : Fuel. 235, p. 495-503

Research output: Contribution to journal › Article