Research Output 1969 2020

Filter
Paper
2019
4 Downloads (Pure)

Accuracy Evaluation of a Drill Guidance System for Orthopaedic Surgery

Sell, N., Georgilas, I., Bridgwater Court, J., Giddins, G. & Du Bois, J., 2019, (Accepted/In press).

Research output: Contribution to conferencePaper

Open Access
File

A high precision patient-specific high tibial osteotomy procedure

Gill, H., 2 Aug 2019.

Research output: Contribution to conferencePaper

5 Downloads (Pure)
Open Access
File

An investigation of mandrel-free spinning

Jawale, K. & Loukaides, E., 2019, (Accepted/In press).

Research output: Contribution to conferencePaper

11 Downloads (Pure)

Assessing the impact of FAME and diesel fuel composition on stability and vehicle filter blocking

Gopalan, K., Chuck, C., Roy-Smith, C. & Bannister, C., 15 Jan 2019.

Research output: Contribution to conferencePaper

Open Access
File
3 Downloads (Pure)

Explainable AI, Model Reconciliation and System-Level Analysis for Safe-Control of Medical Devices

Georgilas, I., 22 Jun 2019, (Accepted/In press).

Research output: Contribution to conferencePaper

Open Access
File

Improving tidal turbine efficiency using winglets

Young, A., Smyth, A., Bajpai, V., Augarde, R., Farman, J. R. & Sequeira, C., 1 Sep 2019.

Research output: Contribution to conferencePaper

7 Downloads (Pure)

K-nearest neighbours, Inverse sensor model, Occupancy mapping

Miao, Y., Hunter, A. J. & Georgilas, I., 25 Apr 2019, (Accepted/In press).

Research output: Contribution to conferencePaper

Open Access
File

Novel filler materials for skin-stiffener structures

Sápi, Z., Hutchins, S., Butler, R. & Rhead, A. T., 16 Aug 2019.

Research output: Contribution to conferencePaper

Sub-23 nm particulate emissions from a highly boosted GDI engine

Akehurst, S., Lewis, A., Turner, J., Leach, F. & Richardson, D., 14 Sep 2019.

Research output: Contribution to conferencePaper

The effect of an edge roller in mandrel-free spinning

Jawale, K. & Loukaides, E., 2019, (Accepted/In press).

Research output: Contribution to conferencePaper

2018

A Review of Switched Inertance Hydraulic Converter Technology

Yuan, C., Pan, M. & Plummer, A., Sep 2018.

Research output: Contribution to conferencePaper

A study of a compliant hydraulic actuator for running robots

Ding, B., Plummer, A. & Iravani, P., 25 Sep 2018.

Research output: Contribution to conferencePaper

Hydraulic actuators
Robots
Hydraulic accumulators
Hydraulics
Friction

Development and Optimisation of an Adaptive Safety Monitor

Akehurst, S., Hillis, A. & Botes, F., 3 Apr 2018.

Research output: Contribution to conferencePaper

Powertrains
Fault detection
Monitoring
Availability
Calibration
29 Downloads (Pure)

Engineering project health monitoring: application of automatic, real-time analytics to PDM systems

Snider, C., Gopsill, J., Jones, D. & Hicks, B., 2 Jul 2018.

Research output: Contribution to conferencePaper

Open Access
File
Osseointegration
Bone Diseases
Sickle Cell Anemia
Necrosis
Prosthesis Design
Osseointegration
Bone Diseases
Sickle Cell Anemia
Necrosis
Prosthesis Design
20 Downloads (Pure)

Exploring the performance of augmented reality technologies in co-creative sessions: Initial results from controlled experiments

Dekoninck, E., O'Hare, J., Giunta, L., Masclet, C. & Cascini, G., 1 Feb 2018, p. 405-416. 12 p.

Research output: Contribution to conferencePaper

Open Access
File
Augmented reality
Experiments
Chemical analysis
1 Citation (Scopus)

Full simulation of a piezoelectric double nozzle flapper pilot valve coupled with a main stage spool valve

Tamburrano, P., Amirante, R., Distaso, E. & Plummer, A., Sep 2018.

Research output: Contribution to conferencePaper

Torque motors
Reels
Nozzles
Fluids
Compressibility

Gas removal by a spark-generated bubble in a rigid tube

Li, B., Ji, C., Zou, J. & Pan, M., May 2018.

Research output: Contribution to conferencePaper

Generation and transmission expansion in Uganda: The cost of minimising sub-national energy inequalities

Trotter, P., Cooper, N. J. & Wilson, P., 11 Oct 2018.

Research output: Contribution to conferencePaper

37 Downloads (Pure)

Hybrid cooling and lubricating technology for CNC milling of Inconel 718 nickel alloy

Shokrani Chaharsooghi, A. & Newman, S., 26 Sep 2018, p. 215-218. 4 p.

Research output: Contribution to conferencePaper

Open Access
File
Nickel alloys
Machining
Cooling
Temperature
Creep resistance

Hybrid cryogenic MQL highspeed machining of Ti-6Al-4V alloy

Shokrani Chaharsooghi, A., Al-Samarrai, I. & Newman, S., Apr 2018, (Accepted/In press).

Research output: Contribution to conferencePaper

Cryogenics
Lubrication
Machining
Cooling
Titanium alloys

Increasing navigation effectiveness in GPS denied environments using through-the-sensor SAS techniques

Connors, W. A., Hunter, A. J. & Dillon, J., 2018.

Research output: Contribution to conferencePaper

Interactions of Vortices and Flexible Wings

Gursul, I. & Wang, Z., 25 Jun 2018.

Research output: Contribution to conferencePaper

24 Downloads (Pure)

Investigating the evolving knowledge structures around new product development

Gopsill, J., Shakspeare, P., Snider, C., Newnes, L. & Hicks, B., 2 Jul 2018.

Research output: Contribution to conferencePaper

Open Access
File

Investigation on the effect of cutting geometry on tool life in drilling Inconel 718

Asghari, S., Reade, N., Wands, C. & Shokrani Chaharsooghi, A., 17 Apr 2018.

Research output: Contribution to conferencePaper

Drilling
Cutting tools
Geometry
Machining
Nickel alloys

Invited talk: Metal-on-metal hip failures: why did this happen?

Gill, H., 2018.

Research output: Contribution to conferencePaper

Hip
Metals
Equipment Failure
Psychological Stress
Orthopedics
16 Downloads (Pure)

Machining Alloy 52 Kovar using different machining environments

Shokrani Chaharsooghi, A., Reade, N. & Mahn, C., 2018.

Research output: Contribution to conferencePaper

Open Access
File
1 Citation (Scopus)

Novel Integrated Control of Fluid-borne Noise in Hydraulic Systems

Pan, M., Ding, B., Yuan, C., Zou, J. & Yang, H., Sep 2018.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
Composite materials
Carbon fibers
Laminates
Materials properties
Skin
1 Citation (Scopus)
Direct injection
Internal combustion engines
Engines
Antiknock rating
Fuel economy

Synthetic aperture sonar phase correction for a curved projector

Sanford, C., Hunter, A. J. & Willcox, A., 2018.

Research output: Contribution to conferencePaper

Tennis string-bed response measurement

Valentine, R., 7 May 2018, p. 615-624. 10 p.

Research output: Contribution to conferencePaper

Open Access
File

Through Life Machine Tool Capability Modelling

Vichare, P., Nassehi, A., Flynn, J. & Newman, S., 2018.

Research output: Contribution to conferencePaper

Toka®: A High Precision Patient Specific High Tibial Osteotomy Procedure

Gill, H., Casonato, A. & MacLeod, A., 29 Jun 2018.

Research output: Contribution to conferencePaper

Understanding User Requirements in Context: A Case Study of Developing a Visualisation Tool to Map Skills in an Engineering Organisation

Joel-Edgar, S. & Gopsill, J., 13 Jan 2018, p. 6-10. 5 p.

Research output: Contribution to conferencePaper

Visualization
Knowledge management
1 Citation (Scopus)
38 Downloads (Pure)

Unsteady Aerodynamics of a Transient Plunging Airfoil

Bull, S., Chiereghin, N., Gursul, I. & Cleaver, D., 8 Jan 2018, p. 1-25. 25 p.

Research output: Contribution to conferencePaper

Open Access
File
2017
59 Downloads (Pure)
Open Access
File