Research Output 1969 2019

Filter
Chapter
2019

Active Control of Rotating Machinery Under Rotor-Stator Contact Conditions

Keogh, P. S., Lusty, C., Bailey, N. Y. & Saket, F., 19 Aug 2019, Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Calvaca, K. & Weber, H. (eds.). Cham, Switzerland: Springer, p. 107-117 11 p. (Mechanisms and Machine Science; vol. 62).

Research output: Chapter in Book/Report/Conference proceedingChapter

Rotating machinery
Stators
Rotors
Magnetic bearings
Bearings (structural)

Assessment of the circular economy transition readiness at a national level: The Colombian case

Garcia, C. L. & Cayzer, S., 25 Apr 2019, The Circular Economy and the Global South: Sustainable Lifestyles and Green Industrial Development. Taylor and Francis, p. 113-133 21 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2 Citations (Scopus)

Control of Flexible Rotor Vibration with Flexibly Mounted Active Magnetic Bearings

Lusty, C., Bailey, N. Y. & Keogh, P. S., 19 Aug 2019, Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM, 2018. Calvaca, K. & Weber, H. (eds.). Cham, Switzerland: Springer Netherlands, p. 65-73 9 p. (Mechanisms and Machine Science; vol. 62).

Research output: Chapter in Book/Report/Conference proceedingChapter

Magnetic bearings
Rotors
Stators
Topology
Controllers

Harnessing the Synergy Potential of Open Source Hardware Communities

Bonvoisin, J., Mies, R. & Jochem, R., 2019, Co-Creation - Reshaping Business and Society in the Era of Bottom-up Economics. Springer International Publishing, p. 129-145 (Management for Professionals).

Research output: Chapter in Book/Report/Conference proceedingChapter

2018

Effective Piezoelectric Coefficients: From Microgeometry to Anisotropy

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 1 Jul 2018, Piezo-Active Composites. Cham, Switzerland: Springer Verlag, p. 35-97 63 p. (Springer Series in Materials Science; vol. 271).

Research output: Chapter in Book/Report/Conference proceedingChapter

Anisotropy
Piezoelectricity
Composite materials

Improving Piezoelectric Sensitivity

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 1 Jul 2018, Piezo-Active Composites. Cham, Switzerland: Springer Verlag, p. 163-169 7 p. (Springer Series in Materials Science; vol. 271).

Research output: Chapter in Book/Report/Conference proceedingChapter

Composite materials
Piezoelectricity
Single crystals

Mathematical formulation

Carnevale, M. & Ahlfeld, R., 22 Jun 2018, Uncertainty Quantification in Computational Fluid Dynamics and Aircraft Engines. 2 ed. Springer International Publishing, p. 67-155 89 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Microgeometry of Composites and Their Piezoelectric Coefficients

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 1 Jul 2018, Piezo-Active Composites. Cham, Switzerland: Springer Verlag, p. 99-133 35 p. (Springer Series in Materials Science; vol. 271).

Research output: Chapter in Book/Report/Conference proceedingChapter

Piezoelectricity
Composite materials
Ignition systems
Underwater acoustics
Energy harvesting

Optimum design and damage tolerance of compressively loaded laminates

Butler, R., Rhead, A. & Dodwell, T., 1 Jan 2018, Comprehensive Composite Materials II. 2nd ed ed. Elsevier Academic Press Inc, Vol. 8-8. p. 118-135 18 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Piezoelectric Coefficients and: Combination of Properties at Specific Microgeometry

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 1 Jul 2018, Piezo-Active Composites. Cham, Switzerland: Springer Verlag, p. 135-152 18 p. (Springer Series in Materials Science; vol. 271).

Research output: Chapter in Book/Report/Conference proceedingChapter

Piezoelectricity
Anisotropy
Electric fields
Polarization
Composite materials

Piezoelectric Coefficients New Opportunities to Improve Sensitivity

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 1 Jul 2018, Piezo-Active Composites. Cham, Switzerland: Springer Verlag, p. 153-161 9 p. (Springer Series in Materials Science; vol. 271).

Research output: Chapter in Book/Report/Conference proceedingChapter

Piezoelectricity
Composite materials
Ferroelectric materials
Volume fraction
Anisotropy

Power systems

Plummer, A. R., Hillis, A. J. & Perez-Collazo, C., 23 Mar 2018, Wave and Tidal Energy. Wiley, p. 191-232 42 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

System characterisation of carbon capture and storage (CCS) systems

Hammond, G., 2018, Biomass Energy with Carbon Capture and Storage (BECCS): Unlocking Negative Emissions. Gough, C., Thornley, P., Mander, S., Vaughan, N. & Lea-Langton, A. (eds.). Chichester: John Wiley & Sons, Ltd, p. 129-162

Research output: Chapter in Book/Report/Conference proceedingChapter

carbon
bioenergy
cost
industry
site selection

The Piezoelectric Medium and Piezoelectric Sensitivity

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 1 Jul 2018, Piezo-Active Composites. Cham, Switzerland: Springer Verlag, p. 1-34 34 p. (Springer Series in Materials Science; vol. 271).

Research output: Chapter in Book/Report/Conference proceedingChapter

Piezoelectric materials
Ferroelectric materials
Ferroelectric ceramics
Electromechanical coupling
Piezoelectricity
2017
1 Citation (Scopus)

Application of Cepstrum Prewhitening on Non-stationary Signals

Barbini, L., Eltabach, M. & Du Bois, J., 22 Sep 2017, Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the 5th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2016, 12–16 September 2016, Gliwice, Poland. Timofiejczuk, A., Chaari, F., Bartelmus, W. & Haddar, M. (eds.). Springer International Publishing, p. 275-283 8 p. (Applied Condition Monitoring ; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)

Customized coarse models for highly heterogeneous materials

Dodwell, T. J., Sandhu, A. & Scheichl, R., 2017, Bifurcation and Degradation of Geomaterials with Engineering Applications. IWBDG 2017. Papamichos, E., Papanastasiou, P., Pasternak, E. & Dyskin, A. (eds.). Springer, p. 577-584 8 p. (Springer Series in Geomechanics and Geoengineering).

Research output: Chapter in Book/Report/Conference proceedingChapter

subsurface flow
Homogenization method
methodology
eigenvalue
engineering

Cybersecurity for Industry 4.0 and Advanced Manufacturing Environments with Ensemble Intelligence

Thames, J. L. & Schaefer, D., 6 Apr 2017, Cybersecurity for Industry 4.0: Analysis for Design and Manufacturing. Thames, L. & Schaefer, D. (eds.). 1 ed. Springer, p. 243-265 Chapter 10. (Springer Series in Advanced Manufacturing).

Research output: Chapter in Book/Report/Conference proceedingChapter

Access control
Internet
Computer networks
Artificial intelligence
Industry

Effect of inter laminar toughening layers on the diaphragm forming quality of carbon/epoxy prepreg

Wang, W-T., Yu, H., Potter, K. & Kim, B. C., 2017, 21st International Conference on Composites Materials.

Research output: Chapter in Book/Report/Conference proceedingChapter

Greenhouse Gas Balances of Bioenergy Systems: The Role of Life Cycle Assessment

McManus, M. C. & Taylor, C. M., 27 Nov 2017, Greenhouse Gas Balances of Bioenergy Systems. Thornley, P. & Adams, P. (eds.). Elsevier Academic Press Inc, p. 29-41 13 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Industry 4.0: An Overview of Key Benefits, Technologies, and Challenges

Thames, J. L. & Schaefer, D., 6 Apr 2017, Cybersecurity for Industry 4.0: Analysis for Design and Manufacturing. Thames, L. & Schaefer, D. (eds.). 1 ed. Springer, p. 1-33 Chapter 1. (Springer Series in Advanced Manufacturing).

Research output: Chapter in Book/Report/Conference proceedingChapter

Industry
Internet
Data privacy
Industrial plants
Innovation

Linear PID control design

Du, C., Johnston, N., Manring, N. D., Plummer, A., Semini, C., Yang, M. & Yu, T., 1 Jan 2017, Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering. Guo, Q. & Jiang, D. (eds.). U. S. A.: CRC Press, p. 17-44 28 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Three term control systems
System stability
Hydraulics
Bandwidth
Controllers

Model construction of electro-hydraulic control system

Chung, C. C., Du, C., Fales, R., Kim, W., Manring, N. D., Plummer, A., Semini, C. & Yu, T., 1 Aug 2017, Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering. Guo, Q. & Jiang, D. (eds.). U. S. A.: CRC Press, p. 7-16 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Mechatronics
Hydraulics
Control systems
Hydraulic actuators
Uncertainty

The Minimum Mandatory Metadata Sets for the KIM Project and RAIDmap

Ball, A., Darlington, M. & McMahon, C., 24 Jan 2017, Developing Metadata Application Profiles. Malta, M. C., Baptista, A. A. & Walk, P. (eds.). Hershey, PA: IGI Global Publishing, p. 37-64 3. (Advances in Web Technologies and Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapter

construction industry
information management
research projects
engineering

Visual support for complex repair operations in a global aerospace company

Joel-Edgar, S., Shi, L., Emanuel, L., Jones, S., Watts, L., Newnes, L., Payne, S., Hicks, B. & Culley, S., 2017, Visual Analytics for Management: Translational Science and Applications in Practice. Bendoly, E. & Clark, S. (eds.). Abingdon: Routledge, p. 100-112 8

Research output: Chapter in Book/Report/Conference proceedingChapter

repair
project
monitoring
2016
2 Citations (Scopus)

Improvement of Composite Drape Forming Quality by Enhancing Interply Slip

Wang, W-T., Yu, H., Potter, K. & Kim, B. C., 1 Jun 2016, ECCM17 - 17th European Conference on Composite Materials. European Society for Composite Materials

Research output: Chapter in Book/Report/Conference proceedingChapter

Composite materials
Resins
Aircraft
Friction
Diaphragms
1 Citation (Scopus)

Modelling and simulation of an inverted Brayton cycle as an exhaust-gas heat recovery system

Chen, Z., Jones, S., Ceen, B., Goya, A. & Copeland, C., 30 Oct 2016, Proceedings of the ASME 2016 Internal Combustion Engine Fall Technical Conference (ICEF), 2016. Fairfield, U.S.A.: American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingChapter

Brayton cycle
Waste heat utilization
Exhaust gases
Thermodynamics
Engines
2 Citations (Scopus)

New effects in 1–3-type composites based on relaxor-ferroelectrics single crystals

Topolov, V. Y., Bowen, C. R. & Bisegna, P., 2 Jan 2016, Advanced Materials: Manufacturing, Physics, Mechanics and Applications. PArinov, I. A., Chang, S-H. & Topolov, V. Y. (eds.). Springer Science and Business Media, LLC, p. 179-195 17 p. (Springer Proceedings in Physics; vol. 175).

Research output: Chapter in Book/Report/Conference proceedingChapter

composite materials
single crystals
hydrostatics
ceramics
matrices

Photocatalytic Properties of Commercially Available TiO2 Powders for Pollution Control

Nuño, M., Ball, R. & Bowen, C., Aug 2016, Nanotechnology and Nanomaterials "Semiconductor Photocatalysis - Materials, Mechanisms and Applications". p. 613 23 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
File
Pollution control
Powders
Polymorphism
Energy gap
Coloring Agents
2 Citations (Scopus)

The High Performance Discontinuous Fibre (HiPerDiF) technology for consistent quality control of reclaimed carbon fibres

Longana, M., Yu, H., Jalalvand, M. & Potter, K., 1 Jun 2016, Proceeding of 17th European Conference on Composite Materials. European Society for Composite Materials

Research output: Chapter in Book/Report/Conference proceedingChapter

2015
2 Citations (Scopus)

Addressing uncertainty in estimating the cost for a product-service-system delivering availability: epistemology and ontology

Goh, Y. M., Newnes, L., Settanni, E., Thenent, N. & Parry, G., 2015, Ontology Modeling in Physical Asset Integrity Management: Addressing Uncertainty in Estimating the Cost for a Product-Service-System Delivering Availability: Epistemology and Ontology. Ibrahimipour, V. & Yacout, S. (eds.). London, U. K.: Springer, p. 199-220 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Product-service systems
Ontology
Epistemology
Uncertainty
Costs

Aligned short fibre hybrid composites with virgin and recycled carbon fibres

Longana, M. L., Yu, H. & Potter, K. D., 1 Jul 2015, Proceedings of the 20th International Conference on Composite Materials (ICCM20). International Conference on Composite Materials, ICCM

Research output: Chapter in Book/Report/Conference proceedingChapter

Assessing modularisation transition with metrics

Heilemann, M., Culley, S., Schlueter, M. & Lindemer, V., 2015, Proceedings of the 20th International Conference on Engineering Design. Milan, Italy: The Design Society, 12 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Capability audit for modular system development: assessing important factors for establishing and maintaining common modular system architectures

Heilemann, M. & Culley, S., 2015, Proceedings of IEEE International Symposium on Systems Engineering, 2015. Rome, Italy: IEEE, p. 398-405 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Industry
Systems engineering
Costs
5 Citations (Scopus)

Convection of a Bingham fluid in a porous medium

Rees, D. A. S., 23 Jun 2015, Handbook of Porous Media (3rd ed.). Vafai, K. (ed.). London, U. K.: CRC Press, 17

Research output: Chapter in Book/Report/Conference proceedingChapter

File

Environmental life-cycle assessment (LCA) of energy systems

Hammond, G., Jones, C. & O'Grady, Á., 2015, Handbook of Clean Energy Systems: Vol. 6. - Sustainability of Energy Systems. Yan, J. (ed.). New York: John Wiley & Sons, Vol. 6.

Research output: Chapter in Book/Report/Conference proceedingChapter

Intraply hybrid composites with highly aligned discontinuous fibres

Yu, H., Longana, M., Jalalvand, M., Wisnom, M. & Potter, K., 2015, International Conference on Advances in Mechanics of Composite Materials and Structures.

Research output: Chapter in Book/Report/Conference proceedingChapter

It's Not Personal: Can Logbooks provide insights into engineering projects?

Snider, C., McAlpine, H., Gopsill, J., Jones, S., Shi, L. & Hicks, B., 1 Jul 2015, DS 80-10 Proceedings of the 20th International Conference on Engineering Design (ICED 15) Vol 10. Weber, C., Husung, S., Cantamessa, M., Cascini, G., Marjanovic, D. & Venkataraman, S. (eds.). The Design Society, Vol. 10. p. 219-230 12 p. (IECD).

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
File
1 Citation (Scopus)

Kinematics of the natural and replaced knee

Coles, L., Gheduzzi, S., Miles, A. & Gill, H., 30 Jun 2015, Total Knee Arthroplasty: Long Term Outcomes. Karachalios, T. (ed.). London, U. K.: Springer, p. 7-19

Research output: Chapter in Book/Report/Conference proceedingChapter

Life Cycle Assessment of Four Microgenerators: Carbon Footprints and Payback Times

Allen, S., McManus, M. & Staffell, I., 24 Jun 2015, Domestic Microgeneration: Renewable and Distributed Energy Technologies, Policies and Economics. Staffell, I., Brett, D. J. L., Brandon, N. P. & Hawkes, A. D. (eds.). Abingdon, U. K.: Routledge, p. 299-318

Research output: Chapter in Book/Report/Conference proceedingChapter

carbon footprint
life cycle
carbon dioxide
carbon
fuel cell
2 Citations (Scopus)

Mechanical stress induced blood trauma

Fraser, K., Jan 2015, Heat Transfer and Fluid Flow in Biological Processes. Becker, S. & Kuznetsov, A. (eds.). London, U. K.: Elsevier Academic Press Inc, p. 305-333

Research output: Chapter in Book/Report/Conference proceedingChapter

Blood
Artificial heart
Hemodynamics
Numerical models
Proteins

Nonlinear Damage Detection and Localisation Using a Time Domain Approach

Boccardi, S., Calla, D. B., Malfense-Fierro, G-P., Ciampa, F. & Meo, M., 2015, Structural Health Monitoring 2015.

Research output: Chapter in Book/Report/Conference proceedingChapter

The Issues & Challenges of 3D Managed Print Services: Towards a Support Tool for 3D Managed Print Services

Gopsill, J. A. & Hicks, B., 1 Nov 2015, Sustainable Design and Manufacturing 2015. Future Technology Press, p. 478-489 12 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
File

Theoretical modeling of fluid-solid coupling in porous materials

Guyer, R. A. & Kim, H. A., 21 Jan 2015, Nonlinear Elasticity and Hysteresis: Fluid-Solid Coupling in Porous Media. Chichester, U. K.: Wiley-Blackwell, p. 57-80 24 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

porous materials
fluids
porosity
musculoskeletal system
tensors
2014
1 Citation (Scopus)

Acoustic emission sensors for assessing and monitoring civil infrastructures

Meo, M., 1 Apr 2014, Sensor Technologies for Civil Infrastructures: Sensing Hardware and Data Collection Methods for Performance Assessment. Wang, M. L., Lynch, J. P. & Sohn, H. (eds.). Cambridge, U. K.: Woodhead Publishing Ltd., Vol. 1. p. 159-178 20 p. (Woodhead Publishing Series in Electronic and Optical Materials).

Research output: Chapter in Book/Report/Conference proceedingChapter

Acoustic emissions
Monitoring
Sensors
Acoustic emission testing
Structural health monitoring

Active control of self-excited roll oscillations of LAR wings

Wang, Z., Hu, T. & Gursul, I., 2014, Fluid-Structure-Sound Interactions and Control: Proceedings of the 2nd Symposium on Fluid-Structure-Sound Interactions and Control, Part III. Zhou, Y., Liu, Y., Huang, L. & Hodges, D. H. (eds.). Berlin, Germany: Springer, p. 357-362 (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapter

Flow control
Micro air vehicle (MAV)
Fixed wings
Blow molding
Vortex flow

Aeroelastic tailoring of a plate wing with functionally graded materials

Dunning, P. D., Stanford, B. K., Kim, H. A. & Jutte, C., Jan 2014, 55th AIAA/ASME/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014 . Reston, U. S. A.: American Institute of Aeronautics and Astronautics

Research output: Chapter in Book/Report/Conference proceedingChapter

Automotive Exhaust Waste Heat Recovery Technologies

Copeland, C., Pesiridis, A., Martinez-Botas, R., Rajoo, S., Romagnoli, A. & Mamat, A., 2014, Automotive Exhaust Emissions and Energy Recovery. Nova Science Publishers

Research output: Chapter in Book/Report/Conference proceedingChapter

Waste heat utilization
Engines
Recovery
Fuel economy
Internal combustion engines
3 Citations (Scopus)

Buckling and compressive strength of laminates with optimized fibre-steering and layer-stacking for aerospace applications

Butler, R., Sep 2014, Polymer Composites in the Aerospace Industry. Irving, P. & Soutis, C. (eds.). Oxford, U. K.: Elsevier, p. 77-97 21 p. (Woodhead Publishing Series in Composites).

Research output: Chapter in Book/Report/Conference proceedingChapter

Aerospace applications
Compressive strength
Laminates
Buckling
Damage tolerance
27 Citations (Scopus)

Cloud-based Design and Manufacturing: Status and Promise

Wu, D., Rosen, D. W. & Schaefer, D., 2014, Cloud-Based Design and Manufacturing (CBDM): A Service-Oriented Product Development Paradigm for the 21st Century. Schaefer, D. (ed.). Springer, p. 1-24 Chapter 1

Research output: Chapter in Book/Report/Conference proceedingChapter

Information technology
Cloud computing
Product design
Costs
Industry
3 Citations (Scopus)

Design, fabrication, and validation of passive wireless resonant sensors for NDT/SHM

Iervolino, O., Jenks, C. H. & Meo, M., 1 Jan 2014, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 9063.

Research output: Chapter in Book/Report/Conference proceedingChapter

File
Structural health monitoring
Nondestructive examination
Fabrication
Sensors
Smart sensors