Research Output 1969 2019

2019
1 Citation (Scopus)

4D printing with robust thermoplastic polyurethane hydrogel-elastomer trilayers

Baker, A. B., Bates, S. R. G., Llewellyn-Jones, T. M., Valori, L. P. B., Dicker, M. P. M. & Trask, R. S., 5 Feb 2019, In : Materials and Design. 163, 107544.

Research output: Contribution to journalArticle

Open Access

Active Control of Rotating Machinery Under Rotor-Stator Contact Conditions

Keogh, P. S., Lusty, C., Bailey, N. Y. & Saket, F., 19 Aug 2019, Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Calvaca, K. & Weber, H. (eds.). Cham, Switzerland: Springer, p. 107-117 11 p. (Mechanisms and Machine Science; vol. 62).

Research output: Chapter in Book/Report/Conference proceedingChapter

Rotating machinery
Stators
Rotors
Magnetic bearings
Bearings (structural)

Additive manufacture of multistable structures

Loukaides, E. G., Lewis, R. W. C. & Bowen, C. R., 1 Feb 2019, In : Smart Materials and Structures. 28, 2, 02LT02.

Research output: Contribution to journalArticle

File

A molecular design strategy to construct the near-infrared fluorescent probe for selectively sensing human cytochrome P450 2J2

Ning, J., Liu, T., Dong, P., Wang, W., Ge, G., Wang, B., Yu, Z., Shi, L., Tian, X., Huo, X., Feng, L., Wang, C., Sun, C., Cui, J-N., James, T. D. & Ma, X., 16 Jan 2019, In : Journal of the American Chemical Society. 141, 2, p. 1126-1134 9 p.

Research output: Contribution to journalArticle

A MUltidimensional Compliant Decoupled Actuator (MUCDA) for Pelvic Support During Gait

Wyss, D., Pennycott, A., Bartenbach, V., Riener, R. & Vallery, H., 1 Feb 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 1, p. 164-174 11 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

A multilayer microperforated panel prototype for broadband sound absorption at low frequencies

Bucciarelli, F., Malfense Fierro, G. P. & Meo, M., 1 Mar 2019, In : Applied Acoustics. 146, p. 134-144 11 p.

Research output: Contribution to journalArticle

Analysis of Fe(Se,Te) Films Deposited On Unbuffered Invar 36

Sylva, G., Malagoli, A., Bellingeri, E., Putti, M., Ferdeghini, C., Vannozzi, A., Celentano, G., Hopkins, S. C., Lunt, A., Ballarino, A. & Braccini, V., 17 Jan 2019, In : IEEE Transactions on Applied Superconductivity. 29, 5, p. 1-5 5 p.

Research output: Contribution to journalArticle

Open Access
File

A new cutting tool design for cryogenic machining of Ti-6Al-4V titanium alloy

Shokrani, A. & Newman, S. T., 4 Feb 2019, In : Materials. 12, 3, 477.

Research output: Contribution to journalArticle

Open Access

A plate model for compressive strength prediction of delaminated composites

Choudhry, R. S., Rhead, A. T., Nielsen, M. W. D. & Butler, R., 15 Feb 2019, In : Composite Structures. 210, p. 509-517 9 p.

Research output: Contribution to journalArticle

Assessing the impact of FAME and diesel fuel composition on stability and vehicle filter blocking

Gopalan, K., Chuck, C., Roy-Smith, C. & Bannister, C., 15 Jan 2019.

Research output: Contribution to conferencePaper

Open Access
File
Open Access
File
Turbines
Powertrains
Flow measurement
Diesel engines
Sampling

Breaking wave imaging using lidar and sonar

Bryan, O., Bayle, P., Blenkinsopp, C. & Hunter, A. J., 12 Mar 2019, In : IEEE Journal of Oceanic Engineering. p. 1-11 11 p.

Research output: Contribution to journalArticle

Open Access
File

Code supporting "Control data, Sankey diagrams, and exergy: Assessing the resource efficiency of industrial plants

Gonzalez Hernandez, A. & Lupton, R., 23 Jan 2019

Research output: Non-textual formSoftware

Open Access
1 Citation (Scopus)

Complex but negligible: Non-linearity of the inertial coupling between the platform and blades of floating wind turbines

Lupton, RC. & Langley, RS., 1 Apr 2019, In : Renewable Energy. 134, p. 710-726 17 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Control of Flexible Rotor Vibration with Flexibly Mounted Active Magnetic Bearings

Lusty, C., Bailey, N. Y. & Keogh, P. S., 19 Aug 2019, Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM, 2018. Calvaca, K. & Weber, H. (eds.). Cham, Switzerland: Springer Netherlands, p. 65-73 9 p. (Mechanisms and Machine Science; vol. 62).

Research output: Chapter in Book/Report/Conference proceedingChapter

Magnetic bearings
Rotors
Stators
Topology
Controllers

Deadzone compensation control based on detection of micro flow rate in pilot stage of proportional directional valve

Lu, Z., Zhang, J., Xu, B., Wang, D., Su, Q., Qian, J., Yang, G. & Pan, M., 2 Apr 2019, In : ISA Transactions. 19, 30

Research output: Contribution to journalArticle

Development of sputtered Nb3Sn films on copper substrates for superconducting radiofrequency applications

Ilyina, E. A., Rosaz, G., Descarrega, J. B., Vollenberg, W., Lunt, A. J. G., Leaux, F., Calatroni, S., Venturini-Delsolaro, W. & Taborelli, M., 21 Jan 2019, In : Superconductor Science and Technology. 32, 3, p. 1-10 10 p.

Research output: Contribution to journalArticle

Open Access
File
File
dielectric properties
Lead
Porosity
ceramics
porosity
2 Citations (Scopus)

Effects of splined shaft bending rigidity on cylinder tilt behaviour for high-speed electro-hydrostatic actuator pumps

Zhang, J., Chen, Y., Xu, B., Pan, M. & Chao, Q., 1 Feb 2019, In : Chinese Journal of Aeronautics. 32, 2, p. 499-512 14 p.

Research output: Contribution to journalArticle

Open Access

Efficiently Generating Mixing by Combining Differing Small Amplitude Helical Geometries

Cookson, A., Doorly, D. & Sherwin, S., 27 Mar 2019, In : Fluids. 4, 2, p. 59-84 26 p.

Research output: Contribution to journalArticle

Open Access
File

Electrical dual-percolation in MWCNTs/SBS/PVDF based thermoplastic elastomer (TPE) composites and the effect of mechanical stretching

Ellingford, C., Smith, H., Yan, X., Bowen, C., Figiel, Ł., McNally, T. & Wan, C., 1 Mar 2019, In : European Polymer Journal. 112, p. 504-514 11 p.

Research output: Contribution to journalArticle

Energy Efficiency Improvement of Heavy-Load Mobile Hydraulic Manipulator with Electronically Tunable Operating Modes

Ding, R., Zhang, J., Xu, B., Cheng, M. & Pan, M., 30 Mar 2019, In : Energy Conversion and Management. p. 447-461

Research output: Contribution to journalArticle

Energy saving potential of high temperature heat pumps in the UK Food and Drink sector

Cooper, S., Hammond, G., Hewitt, N., Norman, J., Tassou, S. & Youssef, W., 18 Mar 2019, In : Energy Procedia. 161, p. 142-149 8 p.

Research output: Contribution to journalArticle

Open Access
Seals
Wheels
Turbines
Stators
Compressed air motors

Experimental Results from the Bath μ-Wave Rotor Turbine Performance Tests

Tuechler, S. & Copeland, C., 30 Mar 2019, In : Journal of Energy Conversion and Management. 189, p. 33-48 16 p., ECM-D-19-00781.

Research output: Contribution to journalArticle

Ferroelectret materials and devices for energy harvesting applications

Zhang, Y., Bowen, C. R., Ghosh, S. K., Mandal, D., Khanbareh, H., Arafa, M. & Wan, C., 1 Mar 2019, In : Nano Energy. 57, p. 118-140 23 p.

Research output: Contribution to journalArticle

Filler materials in composite out-of-plane joints – A review

Sápi, Z., Butler, R. & Rhead, A., 1 Jan 2019, In : Composite Structures. 207, p. 787-800 14 p.

Research output: Contribution to journalReview article

Fillers
Composite materials
Skin
3D printers
Damage tolerance

Flexible Multifunctional Sensors for Wearable and Robotic Applications

Xie, M., Hisano, K., Zhu, M., Toyoshi, T., Pan, M., Okada, S., Tsutsumi, O., Kawamura, S. & Bowen, C., 4 Jan 2019, In : Advanced Materials Technologies. 1800626.

Research output: Contribution to journalArticle

File

Folding-shearing: shrinking and stretching sheet metal with no thickness change

Allwood, J., Cleaver, C., Loukaides, E., Music, O. & Nagy-Sochacki, A., 9 Apr 2019, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Generating an object representation to be manufactured

Dhokia, V., Flynn, J. & Essink, W., 2019, Patent No. WO2018130820 (A1) / GB2560691 (A), 9 Jan 2018, Priority date 12 Jan 2017, Priority No. 1700545.5

Research output: Patent

Harnessing the Synergy Potential of Open Source Hardware Communities

Bonvoisin, J., Mies, R. & Jochem, R., 2019, Co-Creation - Reshaping Business and Society in the Era of Bottom-up Economics. Springer International Publishing, p. 129-145 (Management for Professionals).

Research output: Chapter in Book/Report/Conference proceedingChapter

Holistic Working

Lattanzio, S., 1 Feb 2019, Asset Magazine, p. 26.

Research output: Contribution to specialist publicationArticle

1 Citation (Scopus)

How much cement can we do without? Lessons from cement material flows in the UK

Shanks, W., Dunant, C. F., Drewniok, M. P., Lupton, R. C., Serrenho, A. & Allwood, J. M., 1 Feb 2019, In : Resources, Conservation and Recycling. 141, p. 441-454 14 p.

Research output: Contribution to journalArticle

Influence of Leakage Flows on Hot Gas Ingress

Patinios, M., Ong, I., Scobie, J., Lock, G. & Sangan, C., 1 Feb 2019, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 141, 2, 10 p., 021010.

Research output: Contribution to journalArticle

Leakage (fluid)
Stators
Flow structure
Seals
Wheels

Lipid production through the single-step microwave hydrolysis of macroalgae using the oleaginous yeast Metschnikowia pulcherrima

Abeln, F., Fan, J., Budarin, V. L., Briers, H., Parsons, S., Allen, M. J., Henk, D. A., Clark, J. & Chuck, C. J., 1 Mar 2019, In : Algal Research. 38, p. 1-9 9 p., 101411.

Research output: Contribution to journalArticle

Magnetocaloric effect and piezoresponse of engineered ferroelectric-ferromagnetic heterostructures

Vats, G., Ravikant, Kumari, S., Pradhan, D., Katiyar, R., Ojha, V. N., Bowen, C. & Kumar, A., 1 Mar 2019, In : Journal of Magnetism and Magnetic Materials. 473, p. 511-516 6 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Methanol as a fuel for internal combustion engines

Verhelst, S., Turner, J., Sileghem, L. & Vancoillie, J., 1 Jan 2019, In : Progress in Energy and Combustion Science. 70, p. 43-88 46 p.

Research output: Contribution to journalArticle

Micro-scale to nano-scale generators for energy harvesting: Self powered piezoelectric, triboelectric and hybrid devices

Chandrasekaran, S., Bowen, C., Roscow, J., Zhang, Y., Dang, D. K., Kim, E. J., Misra, R. D. K., Deng, L., Chung, J. S. & Hur, S. H., 23 Feb 2019, In : Physics Reports. 792, p. 1-33 33 p.

Research output: Contribution to journalReview article

Turbines
Rotors
Gases
Stators
Temperature

Modified near-wakes of axisymmetric cylinders with slanted base

Bulathsinghala, D., Wang, Z. & Gursul, I., 10 Jan 2019, (Accepted/In press) In : Aerospace Science and Technology.

Research output: Contribution to journalArticle

Novel approaches to evaluation, modelling and emulation of advanced boosting systems

Akehurst, S., 22 Jan 2019.

Research output: Contribution to conferenceOther

Nudging axially compressed cylindrical panels towards imperfection insensitivity

Cox, B. S., Groh, R. & Pirrera, A., 14 Mar 2019, (Accepted/In press) In : Journal Of Applied Mechanics.

Research output: Contribution to journalArticle

Onset of Convection in an Inclined Anisotropic Porous Layer with Internal Heat Generation

Storesletten, L. & Rees, D. A. S., 16 Apr 2019, In : Fluids. 4, 2, p. 1-8 18 p.

Research output: Contribution to journalArticle

Open Access

Operative and Radiographic Acetabular Component Orientation in Total Hip Replacement: Influence of Pelvic Orientation and Surgical Positioning Technique

Rutherford, M., O'Connor, J. D., Gill, H. S., Hill, J., Beverland, D., Lennon, A. B. & Dunne, N. J., 1 Feb 2019, In : Medical Engineering & Physics . 64, p. 7-14 8 p.

Research output: Contribution to journalArticle

Hip Replacement Arthroplasties
Ligaments
Pelvis
Regression Analysis
Research

Oxidation of ethanol and hydrocarbon mixtures in a pressurised flow reactor

Yuan, H., Lu, Z., Chen, Z., Yang, Y., Brear, M., Anderson, J. & Leone, T., 31 Jan 2019, In : Combustion and Flame. 199, p. 96-113 18 p.

Research output: Contribution to journalArticle

Proof of concept for a smart composite orbital debris detector

De Simone, M. E., Andreades, C., Hilmi, A. M., Meo, M. & Ciampa, F., 26 Feb 2019, In : Acta Astronautica.

Research output: Contribution to journalArticle