Research Output

2017
Open Access
File
7 Citations (Scopus)
144 Downloads (Pure)

Establishing and validating an osteoporotic model using bovine tibia

Fletcher, J., Whitehouse, M., Gill, H. & Preatoni, E., Jul 2017. 1 p.

Research output: Contribution to conferencePaper

File
37 Downloads (Pure)

Establishing and validating an osteoporotic model using juvenile bovine tibiae

Fletcher, J., Williams, S., Whitehouse, M., Gill, H. & Preatoni, E., 2017, (Acceptance date). 1 p.

Research output: Contribution to conferenceAbstract

Establishing optimum screw tightening to maximise pullout force in fracture fixation

Fletcher, J., Williams, S., Whitehouse, M., Gill, H. & Preatoni, E., 2017, (Acceptance date). 1 p.

Research output: Contribution to conferenceAbstract

Establishing optimum screw tightening to maximise pullout force in fracture fixation

Fletcher, J., Whitehouse, M., Gill, H. & Preatoni, E., Jul 2017. 1 p.

Research output: Contribution to conferencePaper

File
41 Downloads (Pure)

Evaluating the appropriate screw fastening torque in cortical bone - A Validated finite element model

MacLeod, A., Polak-Krasna, K., Fletcher, J., Whitehouse, M., Preatoni, E. & Gill, H., Jul 2017. 1 p.

Research output: Contribution to conferencePaper

File
50 Downloads (Pure)

Evaluating the Screw Fastening Torque Required to Generate Appropriate Preload in Bone Fracture Fixation

MacLeod, A., Polak-Krasna, K., Fletcher, J. & Gill, H., 4 Sep 2017.

Research output: Contribution to conferencePoster

Keynote Lecture: Future musculoskeletal healthcare challenges

Gill, H., 15 Sep 2017.

Research output: Contribution to conferencePaper

Non-invasive vibrometry-based diagnostic detection of acetabular cup loosening in Total Hip Replacement (THR)

Alshuhri, A. A., Holsgrove, T. P., Miles, A. W. & Cunningham, J. L., Oct 2017, In : Medical Engineering & Physics . 48, p. 188-195

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
92 Downloads (Pure)

Non-linear strain predictions for bone screw fixation for developing a surgical decision aid

Polak-Krasna, K., MacLeod, A., Fletcher, J., Whitehouse, M., Preatoni, E. & Gill, H., 15 Sep 2017.

Research output: Contribution to conferencePaper

Open Access
File
42 Downloads (Pure)

Optimal pullout resistance is achieved when bone screws are inserted at 65-75% of the stripping torque

Fletcher, J., MacLeod, A., Polak-Kraśna, K., Whitehouse, M., Gill, H. & Preatoni, E., 10 Nov 2017, (Acceptance date).

Research output: Contribution to conferenceAbstract

Optimal Pullout Resistance Is Achieved When Bone Screws Are Inserted At 65 To 75% Of The Stripping Torque

Fletcher, J., MacLeod, A., Polak-Kraśna, K., Williams, S., Whitehouse, M., Gill, H. & Preatoni, E., 17 Nov 2017, (Acceptance date). 1 p.

Research output: Contribution to conferenceAbstract

Radiographic evaluation of the proximal femur in sickle cell disease patients

George, A., Ellis, M. & Gill, H., Sep 2017.

Research output: Contribution to conferencePaper

Reducing ethical and financial costs in biomechanical research: is juvenile bovine bone the answer?

Fletcher, J., Williams, S., Whitehouse, M., Gill, H. & Preatoni, E., 2017, (Acceptance date). 1 p.

Research output: Contribution to conferenceAbstract

Regional endocardial strains in the left ventricle enable more accurate assessment of acutely-evolving and chronic heart failure post-myocardial infarction

Odunmbaku-Mansell, O., Bruno, V. D., Sammut, E., Thomas, J., Ascione, R., Gill, H., Fraser, K. & Cookson, A., 18 Dec 2017, (Submitted).

Research output: Contribution to conferencePaper

File
13 Downloads (Pure)

Study of impact loading on the cervical spine using digital image correlation

Agostinho Hernandez, B., Dyke, L., Gill, R. & Gheduzzi, S., 5 Sep 2017.

Research output: Contribution to conferencePaper

The application of physiological loading using a dynamic, multi-axis spine simulator

Holsgrove, T., Miles, A. & Gheduzzi, S., Mar 2017, In : Medical Engineering & Physics . 41, p. 74-80 7 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
155 Downloads (Pure)

The efficacy of rotational control designs in promoting torsional stability of hip fracture fixation

Gosiewski, J., Holsgrove, T. & Gill, H., 4 May 2017, In : Bone and Joint Research. 6, 5, p. 270-276

Research output: Contribution to journalArticle

Open Access
File
1 Citation (Scopus)
56 Downloads (Pure)

Use of contrast agents on polymeric materials

Hossein Zadeh Zaribaf, P., Gill, H. & Pegg, E., 8 Feb 2017.

Research output: Contribution to conferencePaper

Validated cemented socket model for optimising acetabular fixation

Gosiewski, J., Gheduzzi, S. & Gill, H., Sep 2017.

Research output: Contribution to conferencePaper

Validated Cemented Socket Model for Optimising Acetabular Fixation

Gosiewski, J., Gheduzzi, S. & Gill, H., Jul 2017.

Research output: Contribution to conferencePaper

File
37 Downloads (Pure)
2018

ARCHi: Automatic Recognition and Classification of Hip Fractures

Murphy, E., Gregson, C., Von Arx, O., Whitehouse, M., Budd, C. & Gill, H., 2018.

Research output: Contribution to conferenceAbstract

File
25 Downloads (Pure)

Collected marine litter - A growing waste challenge

Schneider, F., Parsons, S., Clift, S., Stolte, A. & McManus, M., 1 Mar 2018, In : Marine Pollution Bulletin. 128, p. 162-174 13 p.

Research output: Contribution to journalReview article

Open Access
File
24 Citations (Scopus)
153 Downloads (Pure)

Comparison of vertebral body displacements obtained by DIC and motion capture in a cervical spine impact experiment

Boyd, S., Silvestros, P., Agostinho Hernandez, B., Gill, H., Cazzola, D., Preatoni, E. & Gheduzzi, S., 2018, British Orthopaedic Research Society Conference 2018 - BORS 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Correction of pelvic adduction during total hip arthroplasty reduces variability in radiographic inclination: findings of a randomised controlled trial

O'Neill, C., Magill, P., Hill, J., Patterson, C., Molloy, D., Gill, H. & Beverland, D., 1 May 2018, In : Hip International. 28, 3, p. 240-245 6 p.

Research output: Contribution to journalArticle

Open Access
File
1 Citation (Scopus)
47 Downloads (Pure)

Development of a musculoskeletal cervical spine model for the use in the biomechanical analysis of axial impacts

Silvestros, P., Preatoni, E., Gill, H., Gheduzzi, S., Agostinho Hernandez, B., Holsgrove, T. & Cazzola, D., 17 Sep 2018, Bath Biomechanics Symposium.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
29 Downloads (Pure)

Estimation of cervical spine internal loads with the use of validated bushing elements for sport collisions. Application in the analysis of head impacts in rugby contact events

Silvestros, P., Preatoni, E., Gill, R., Gheduzzi, S., Agostinho Hernandez, B., Holsgrove, T. & Cazzola, D., 2018, Abstract Book of the 8th World Congress of Biomechanics. Dublin, Ireland, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
40 Downloads (Pure)

Estimation of viscoelastic bushing parameters of a musculoskeletal cervical spine model in impact scenarios

Silvestros, P., Boyd, S., Agostinho Hernandez, B., Gheduzzi, S., Gill, H., Preatoni, E. & Cazzola, D., 2018, British Orthopaedic Research Society Conference 2018 - BORS 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Exploring the Mechanisms of Head-Trunnion Mechanics in Modular Hip Prostheses: The Influence of Material and Structural Stiffness

MacLeod, A. & Gill, H., 2018, British Orthopaedic Research Society Conference 2018 - BORS 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

How do implant type, head size and AVN lesion size affect the likelihood of femoral head collapse following hip fixation?

MacLeod, A., Whitehouse, M., Gill, H. & Pegg, E., 21 Feb 2018, Bone and Joint Journal Orthopaedic Proceedings. Vol. 98 (Supp 16). p. 38-38

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Invited talk: Metal-on-metal hip failures: why did this happen?

Gill, H., 2018.

Research output: Contribution to conferencePaper

Open Access
12 Citations (Scopus)
14 Downloads (Pure)
Open Access
File
3 Citations (Scopus)
82 Downloads (Pure)

Pelvic Positioning in the Supine Position Leads to More Consistent Cup Orientation after Total Hip Arthroplasty

Grammatopoulos, G., Gofton, W., Cochran, M., Dobransky, J., Carli, A., Abdelbary, H., Gill, H. & Beaule, P., 8 Oct 2018, In : The Bone & Joint Journal. 100-B, 10, p. 1280-1288

Research output: Contribution to journalArticle

Radiopaque Unicompartmental Knee Bearing for Direct Wear Measurement

Hossein Zadeh Zaribaf, P., Gill, H. & Pegg, E., 2018, British Orthopaedic Research Society Conference 2018 - BORS 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reduced bearing excursion after mobile bearing unicompartmental knee replacement is associated with poor functional outcome.

Wahal, N., Gaba, S., Malhotra, R., Kumar, V., Pegg, E. & Pandit, H., 5 Feb 2018, In : Journal of Arthroplasty. 33, 2

Research output: Contribution to journalArticle

Reducing variability in apparent operative inclination during total hip arthroplasty: findings of a randomised controlled trial

O'Neill, C., Hill, J., Patterson, C., Molloy, D., Gill, H. & Beverland, D., 1 May 2018, In : Hip International. 28, 3, p. 234-239 6 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
44 Downloads (Pure)

Return to contact sport post ORIF facial fractures

Reeve-Brook, L., Gill, H., Wicks, C. & Colbert, S., Jun 2018.

Research output: Contribution to conferencePoster

Structural Damage Location by Low-Cost Piezoelectric Transducer and Advanced Signal Processing Techniques

A. Castro, B., Fabricio G., B., A. C. Ulson, J., F. Alves, A., A. M. Clerice, G., Agostinho Hernandez, B. & S. Campos, F., 14 Nov 2018, In : Proceedings — Open Access Journal. 4, 1 - ESCA-5, 2.

Research output: Contribution to journalConference article

Open Access
13 Citations (Scopus)